Pick your 3D printer

Filter by what you need, then compare up to 4 printers side by side

Every printer here is verified, compatible or expected to work with SimplyPrint. Pick the features you need, tick up to 4 printers and compare their specs, connection methods and what owners say. See the full compatibility list

Not sure where to start? Our buyer's guides: Best 3D printer 2026 · Schools · Beginners and home · Print farms · Business

Side by side

Clear the comparison

Click a row's name to rank the printers by it, highest first. Click it again for lowest first, and click other rows to break ties.

A short verdict for hobbyists, schools, print farms and businesses, written by AI from our catalog data.
Printer QIDI Q1 Pro 3D printer QIDI Q1 Pro Bambu Lab P1S 3D printer Bambu Lab P1S
Compatible Verified by SimplyPrint
Connection methods
  • Klipper (Moonraker): Compatible
  • SimplyPrint Client: Verified by SimplyPrint
What you need to connect it
  • Klipper (Moonraker): Nothing extra: the printer runs Klipper as it ships
  • SimplyPrint Client: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client
In use with SimplyPrint 1,500+ printers use SimplyPrint
Not rated yet
SimplyPrint Client: 4.7 out of 5 (3 verified owners)
March 2024 July 13, 2023
Made by a company from China China
None listed yet
245 x 245 x 240 mm 256 x 256 x 256 mm
Unknown Bambu Lab AMS, Bambu Lab AMS 2 Pro, Bambu Lab AMS HT
Fully enclosed Fully enclosed
Yes Yes
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
600 mm/s 500 mm/s
Motion system CoreXY CoreXY
Yes Yes
1 1
No No
No No
350 °C 300 °C
Up to 120 °C Up to 100 °C
Up to 60 °C Unknown
Wi-Fi, USB Wi-Fi, SD card
Yes Yes
Yes Yes
245 x 245 mm 256 x 256 mm
Nozzle it ships with 0.4 mm 0.4 mm
Filament diameter 1.75 mm 1.75 mm
Firmware it ships with Klipper The maker's own
No No
SimplyPrint's rating of the brand, from public sources. How we rate Mostly open 4.2 of 5 for QIDI · Why Mostly closed 2.3 of 5 for Bambu Lab · Why
●●●●● ●●●●●
●●●●● ●●●●●
●●●●● ●●●●●
●●●●● ●●●●●
●●●●● ●●●●●
●●●●● ●●●●●
Brand's spool tags (NFC) Whether its multi-material unit can recognise any filament Open: tags for any filament SimplyPrint reads QIDI's spool tags and writes them for any filament, so every brand works like QIDI's own. How it works Closed: the maker's own spools Bambu Lab's tags are encrypted: only Bambu Lab's own spools are recognised automatically. SimplyPrint reads them through the printer. How it works
Where to buy Not sold by our partner stores QIDI sends us some of its new printers free of charge.
Bambu Lab Store
TECBEARS
All its stores

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

747 printers

2 of 4 picked - QIDI Q1 Pro, Bambu Lab P1S Clear