The VEHO 1000 PRO is Tronxy's open-frame large-format printer with a full 1000 x 1000 x 1000 mm build volume and Klipper firmware. It is for makers and workshops printing very large parts in PLA, PETG, ABS and TPU.
Does the Tronxy VEHO 1000 Pro 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Ships Klipper with Moonraker: KlipperScreen on the touchscreen, Mainsail in the browser at the printer's IP (manual, resonance-compensation section).
Source
What you need: Nothing extra: the printer runs Klipper as it ships
Ships Klipper; OctoPrint only on top of it.
Source
Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Tronxy VEHO 1000 Pro: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
No2
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsNo2
Works
Depends
Not supported
Needs a camera
SimplyPrint doesn't support this through this connection yet.
What slicer to use for the Tronxy VEHO 1000 Pro
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy VEHO 1000 Pro, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy VEHO 1000 Pro.
Cloud-Based Slicer for Tronxy VEHO 1000 Pro
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Tronxy VEHO 1000 Pro models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Tronxy VEHO 1000 Pro: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Tronxy VEHO 1000 Pro
Tronxy doesn't make an app for the Tronxy VEHO 1000 Pro. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Tronxy VEHO 1000 Pro in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Tronxy VEHO 1000 Pro specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
1000 x 1000 x 1000 mm
Bed type
Square
Bed size
1000 x 1000 mm
Max print height
1000 mm
Printing
Enclosure
Open frame
Motion system
Other kinematics
Max print speed
600 mm/s
Max extruder temperature
320 °C
Has heated bed
Yes
Max bed temperature
110 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
Wi-Fi, Ethernet, USB
Prints from
USB stick
Supports serial printing
No
Shipped firmware
Klipper
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Tronxy
Printer model name
VEHO 1000 Pro
Made by a company from
China
Launched
December 2025
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Tronxy VEHO 1000 Pro print?
Filament compatibility for the Tronxy VEHO 1000 Pro: the materials Tronxy lists for it.
Filament
Suitability
Notes
PLA
Great
On the maker's list of materials for this printer.
PETG
Great
On the maker's list of materials for this printer.
TPU & flexibles
Great
On the maker's list of materials for this printer.
ABS & ASA
Great
On the maker's list of materials for this printer.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Tronxy VEHO 1000 Pro
Filaments the Tronxy VEHO 1000 Pro prints well, Tronxy's own first, then the best known.
Choose the VEHO 1000 PRO when the part size is the point: a one-metre cube is far beyond any enclosed desktop printer. It is an open frame, so ABS and ASA warp more easily; the enclosed VEHO 1000A has the same plate with a full enclosure. For parts under about 400 mm, a VEHO 4 or a Bambu Lab printer is faster, easier and far cheaper.
Pros
1000 x 1000 x 1000 mm build volume, with a 320 °C ceramic-heated hotend (Tronxy).
Klipper firmware at up to 600 mm/s, so it works with SimplyPrint through Klipper.
Four independent Z motors, 36-point auto-levelling and seven linear guide rails keep the huge bed level (Tronxy).
Filament run-out detection, power-off resume and resonance compensation (Tronxy).
An optional 2-in-1-out extruder adds two-colour printing (Tronxy).
Cons
Open frame, so warping is a risk with ABS and ASA over a one-metre bed.
A big, heavy machine with a large footprint; it needs a dedicated space and a lot of filament.
No camera in our facts, which matters for multi-hour prints.
Express and air shipments are priced without import duties and taxes, which the buyer pays at customs; Tronxy lists sea shipments as tax-free, door to door.
No independent hands-on review found; only Tronxy's own claims.
Who it suits
SchoolsNot a good fit
Too big and open for a classroom, with hot parts in reach.
HobbyistsGood fit
If you want to print life-size props or furniture parts, nothing at this price covers it, though it is a project to own.
BusinessesCan work
Large jigs, fixtures and props are possible, but open frame, no camera and no review make it a risk.
Print farmsNot a good fit
One huge machine rather than many identical ones, and no camera or plate-swap kit in our facts.
Compare the Tronxy VEHO 1000 Pro with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Tronxy VEHO 1000 Pro, and how open Tronxy leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
Firmware and custom firmware ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
Local control and integrations ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
Third-party filament, slicers and parts ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
Repairs and spare parts ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
Community and documentation ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
Pros
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
Cons
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
Track record
October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
Researched from 11 sources, last checked October 18, 2026. Show sources
Is the Tronxy VEHO 1000 Pro compatible with SimplyPrint?
Yes. You can connect the Tronxy VEHO 1000 Pro to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Tronxy VEHO 1000 Pro to SimplyPrint?
Follow our step-by-step setup guide for the Tronxy VEHO 1000 Pro. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Tronxy VEHO 1000 Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy VEHO 1000 Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Tronxy VEHO 1000 Pro?
Yes, but OrcaSlicer has no built-in profile for the Tronxy VEHO 1000 Pro that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Tronxy VEHO 1000 Pro print?
Tronxy lists PLA, ABS & ASA, PETG and TPU & flexibles for the VEHO 1000 Pro.
Does the Tronxy VEHO 1000 Pro work with OctoPrint or Klipper?
The Tronxy VEHO 1000 Pro works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Tronxy VEHO 1000 Pro's bed size and build volume?
The Tronxy VEHO 1000 Pro has a 1000 x 1000 mm print bed and prints up to 1000 mm tall, a build volume of about 1000 x 1000 x 1000 mm. See the full specifications table above for bed type, temperatures and more.
When did the Tronxy VEHO 1000 Pro come out?
Tronxy launched the VEHO 1000 Pro in December 2025.
Can the Tronxy VEHO 1000 Pro eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the Tronxy VEHO 1000 Pro?
From Tronxy's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
