Vivedino Formbot Raptor 2.0 700: specs, SimplyPrint compatibility and setup

By Vivedino, China

Vivedino Formbot Raptor 2.0 700 image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: OctoPrint
Set it up Compare Buy from Vivedino

Vivedino Formbot Raptor 2.0 700 at a glance

The Vivedino Formbot Raptor 2.0 700 is a 3D printer by Vivedino with a 400 x 400 x 700 mm build volume.

Build volume
400 x 400 x 700 mm
Enclosure
Open frame
Motion system
Bed slinger
Prints well
PLA, PETG, TPU & flexibles
All specifications

Connect the Vivedino Formbot Raptor 2.0 700 to SimplyPrint

Does the Vivedino Formbot Raptor 2.0 700 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint supports everything the Vivedino Formbot Raptor 2.0 700 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Vivedino Formbot Raptor 2.0 700

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Vivedino Formbot Raptor 2.0 700, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Vivedino Formbot Raptor 2.0 700

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Vivedino Formbot Raptor 2.0 700.

Cloud-Based Slicer for Vivedino Formbot Raptor 2.0 700

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Vivedino Formbot Raptor 2.0 700 models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Vivedino Formbot Raptor 2.0 700: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Vivedino Formbot Raptor 2.0 700

SimplyPrint works as the Vivedino Formbot Raptor 2.0 700's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Vivedino Formbot Raptor 2.0 700 to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Vivedino Formbot Raptor 2.0 700

There's no plate swapper or auto-ejection kit for the Vivedino Formbot Raptor 2.0 700 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Bed slingers are the easiest to automate

The Vivedino Formbot Raptor 2.0 700 moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead.

For example: JobOx · swapmod

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Vivedino Formbot Raptor 2.0 700 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 400 x 400 x 700 mm
Bed type Square
Bed size 400 x 400 mm
Max print height 700 mm

Printing

Enclosure Open frame
Motion system Bed slinger
Max extruder temperature 280 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive Yes
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Vivedino
Printer model name Formbot Raptor 2.0 700
Made by a company from China

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Vivedino Formbot Raptor 2.0 700 print?

Filament compatibility for the Vivedino Formbot Raptor 2.0 700: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Vivedino Formbot Raptor 2.0 700

Filaments the Vivedino Formbot Raptor 2.0 700 prints well, Vivedino's own first, then the best known.

Find filament for the Vivedino Formbot Raptor 2.0 700 All 3D printer filaments

Compare the Vivedino Formbot Raptor 2.0 700 with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Vivedino Formbot Raptor 2.0 700 with other printers All Vivedino printers

Where to buy the Vivedino Formbot Raptor 2.0 700

Vivedino Official store

Best for USA: Vivedino's global store

Bought straight from Vivedino, from the shop that serves where you are.

Out of stock at Vivedino Checked October 23, 2026
Buy from Vivedino

Frequently asked questions

Is the Vivedino Formbot Raptor 2.0 700 compatible with SimplyPrint?

Yes. You can connect the Vivedino Formbot Raptor 2.0 700 to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Vivedino Formbot Raptor 2.0 700 to SimplyPrint?

Follow our step-by-step setup guide for the Vivedino Formbot Raptor 2.0 700. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Vivedino Formbot Raptor 2.0 700?

Cura, PrusaSlicer and OrcaSlicer all work with the Vivedino Formbot Raptor 2.0 700, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Vivedino Formbot Raptor 2.0 700?

Yes, but OrcaSlicer has no built-in profile for the Vivedino Formbot Raptor 2.0 700 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Vivedino Formbot Raptor 2.0 700 print?

Based on its specs (hotend up to 280C, heated bed up to 100C), the Vivedino Formbot Raptor 2.0 700 handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Vivedino Formbot Raptor 2.0 700 work with OctoPrint or Klipper?

The Vivedino Formbot Raptor 2.0 700 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Vivedino Formbot Raptor 2.0 700's bed size and build volume?

The Vivedino Formbot Raptor 2.0 700 has a 400 x 400 mm print bed and prints up to 700 mm tall, a build volume of about 400 x 400 x 700 mm. See the full specifications table above for bed type, temperatures and more.

Can the Vivedino Formbot Raptor 2.0 700 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

Where can I buy the Vivedino Formbot Raptor 2.0 700?

From Vivedino's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.