Connect the ELEGOO Centauri Carbon Canvas to SimplyPrint
Does the ELEGOO Centauri Carbon Canvas 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
SimplyPrint Client
Compatible
The Centauri Carbon with ELEGOO's Canvas multi-colour unit; the Centauri Carbon works with the SimplyPrint Client.
What you need: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client
ELEGOO's own firmware; no Moonraker to connect to.
OctoPrint
Directly, over USB
Not compatible
No USB printing from a computer on ELEGOO's own firmware.
What works with SimplyPrint
Connected through SimplyPrint Client, SimplyPrint supports everything the ELEGOO Centauri Carbon Canvas lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. The only exceptions are what the ELEGOO Centauri Carbon Canvas doesn't let other software do: baby stepping, send G-code, change filament, bed leveling and Z-Offset Calibration.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
SimplyPrint Client
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes
AI failure detection
Yes
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Not offered by the printer1
Send G-code
Not offered by the printer1
Calibration
Change filament
Not offered by the printer1
Bed leveling
Not offered by the printer1
Z-Offset Calibration
Not offered by the printer1
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
Yes
Connected to SimplyPrint through SimplyPrint Client
Compatible
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingNot offered by the printer1
Send G-codeNot offered by the printer1
Calibration
Change filamentNot offered by the printer1
Bed levelingNot offered by the printer1
Z-Offset CalibrationNot offered by the printer1
Automation
AutoPrint ProYes
Download the file before the print startsYes
Works
Depends
Not supported
Not offered by the printer
The printer doesn't offer this to other software.
ELEGOO Centauri Carbon Canvas owners on SimplyPrint
In use with SimplyPrint
What slicer to use for the ELEGOO Centauri Carbon Canvas
ELEGOO printers use ElegooSlicer, ELEGOO's own slicer. There's no ready-made profile for the ELEGOO Centauri Carbon Canvas in our cloud yet.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the ELEGOO Centauri Carbon Canvas.
Cloud-Based Slicer for ELEGOO Centauri Carbon Canvas: Use ElegooSlicer Online
Use ElegooSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your ELEGOO Centauri Carbon Canvas models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your ELEGOO Centauri Carbon Canvas: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the ELEGOO Centauri Carbon Canvas
SimplyPrint works as the ELEGOO Centauri Carbon Canvas's app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the ELEGOO Centauri Carbon Canvas in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Enclosed printers push their prints out
The ELEGOO Centauri Carbon Canvas's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
ELEGOO Centauri Carbon Canvas specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
Build volume
256 x 256 x 256 mm
Bed type
Square
Bed size
256 x 256 mm
Max print height
256 mm
Printing
Enclosure
Fully enclosed
Motion system
CoreXY
Max print speed
500 mm/s
Max extruder temperature
320 °C
Has heated bed
Yes
Max bed temperature
110 °C
Number of nozzles
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Connecting
Connectivity
Wi-Fi, USB
Built-in camera
Yes
Supports serial printing
No
Shipped firmware
The maker's own
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
ELEGOO
Printer model name
Centauri Carbon Canvas
Made by a company from
China
Launched
2025
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the ELEGOO Centauri Carbon Canvas print?
Filament compatibility for the ELEGOO Centauri Carbon Canvas: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
Great
Enclosed, with a hot enough hotend and bed: ABS and ASA print well.
Nylon (PA)
Good
Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC)
Good
In range for PC. Dry the filament, print slowly, and use an enclosure for the best results.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the ELEGOO Centauri Carbon Canvas
Filaments the ELEGOO Centauri Carbon Canvas prints well, ELEGOO's own first, then the best known.
Compare the ELEGOO Centauri Carbon Canvas with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the ELEGOO Centauri Carbon Canvas, and how open ELEGOO leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mostly open (3.8 of 5)
Mostly open
Walled gardenOpen
ELEGOO is a Shenzhen company founded in 2015 that makes FDM and resin 3D printers, filament, laser engravers and STEM electronics kits. Its FDM range is the Centauri Carbon, an enclosed CoreXY printer, and the Neptune 4 series of open-frame Klipper printers, sold to hobbyists at budget to mid-range prices. DJI became a shareholder in 2025.
Founded:
2015 ·
Headquarters:
Shenzhen, China ·
Ownership:
Privately held through its parent, Shenzhen Zhinengpai (SmartPie) Technology; DJI became a shareholder in 2025 ·
Website:www.elegoo.com
ELEGOO is fairly open in daily use: its printers work over the LAN with open slicers and any filament, and it now publishes firmware source. Source releases have followed community pressure rather than launch, and spare parts for the newest printers are thin in its store.
Firmware and custom firmware ●●●●●
The Neptune 4 series runs Klipper. For the Centauri Carbon, which went on sale in February 2025, ELEGOO published its modified source on GitHub under GPL-3.0 in September 2025, saying it did so in response to user feedback.
[1][2][3][4]
Local control and integrations ●●●●●
ELEGOO's printers connect to its slicer on the local network by IP without an account. The Neptune 4 series serves Klipper's web interface and Moonraker, which OrcaSlicer reaches as an Octo/Klipper host. For the Centauri Carbon and Centauri Carbon 2, ELEGOO published Elegoo Link on GitHub in January 2026, an Apache-2.0 SDK for local discovery, status, file upload and print control. The Matrix phone app adds remote printing while the printer is online.
[5][4][16][6][17]
Third-party filament, slicers and parts ●●●●●
Third-party filament works; ElegooSlicer is an open-source OrcaSlicer-based slicer, OrcaSlicer works with the Neptune 4, and ELEGOO published the data format of its RFID filament tags so others can use it.
[7][8][4]
Repairs and spare parts ●●●●●
ELEGOO sells hotend, extruder and nozzle kits and some boards for the Neptune 4, and its wiki has many replacement guides, including the Centauri Carbon motherboard. The store's Centauri Carbon parts list is short (hotend kit, touchscreen, upper shell).
[9][10][11]
Data and privacy ●●●●●
LAN printing needs no account; the Matrix app and cloud do. The privacy policy names the companies responsible for personal data in each region (Shenzhen, Hong Kong, United States) but is written mainly for the online store.
[12][5]
Community and documentation ●●●●●
Active community and a wiki with guides per model; firmware and slicer sources are on GitHub, although the Centauri Carbon source came after users asked for it.
[11][7][1]
Pros
Works on the local network with ElegooSlicer or OrcaSlicer, with no account needed.
Open-source slicer and a published RFID tag format for filament.
Many step-by-step replacement guides in its wiki.
Offered owners compensation when the Centauri Carbon multi-colour add-on was delayed.
Cons
Centauri Carbon firmware source came about seven months after sales began, after users asked.
The Centauri Carbon's multi-colour add-on only became available in April 2026, after ELEGOO said in November 2025 it could not give a date.
Few complete Centauri Carbon parts are listed in its store.
The privacy policy is written mainly for the online store.
Track record
May 2026: ELEGOO's parent closed a B+ financing round of over 500 million yuan (about $73 million) from investors including Meituan, Hillhouse Capital and Shenzhen Capital Group. It reported 2025 revenue of 2.3 billion yuan.
[13]
April 27, 2026: CANVAS, the multi-colour system for the Centauri Carbon, became available, five months after ELEGOO said it could not give a release date.
[14]
November 18, 2025: DJI and Hangzhou Jiangyu Technology became shareholders of ELEGOO's parent company, according to a business registration update reported by TechNode. The size of the stake was not disclosed.
[15]
November 2025: ELEGOO said the multi-colour system it was developing for the Centauri Carbon did not yet perform as it wanted and that it could not guarantee a release date. It offered owners a choice of a $50 filament coupon, a 365-day warranty extension or $80 off a Centauri Carbon 2 Combo.
[14]
September 26, 2025: In response to user feedback, ELEGOO published the modified source code of the Centauri series firmware on GitHub under GPL-3.0.
[1][2]
February 2025: ELEGOO opened pre-orders for the Centauri Carbon, its first enclosed CoreXY printer, on 17 February 2025.
[3]
Researched from 17 sources, last checked October 18, 2026. Show sources
Is the ELEGOO Centauri Carbon Canvas compatible with SimplyPrint?
Yes. You can connect the ELEGOO Centauri Carbon Canvas to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the ELEGOO Centauri Carbon Canvas to SimplyPrint?
Follow our step-by-step setup guide for the ELEGOO Centauri Carbon Canvas. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick.
What slicer should I use for the ELEGOO Centauri Carbon Canvas?
Use ElegooSlicer, ELEGOO's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the ELEGOO Centauri Carbon Canvas in it yet.
Can I use OrcaSlicer with the ELEGOO Centauri Carbon Canvas?
Yes, but OrcaSlicer has no built-in profile for the ELEGOO Centauri Carbon Canvas that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the ELEGOO Centauri Carbon Canvas print?
Based on its specs (hotend up to 320C, heated bed up to 110C), the ELEGOO Centauri Carbon Canvas handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the ELEGOO Centauri Carbon Canvas work with OctoPrint or Klipper?
Not that we know of, but you don't need either: SimplyPrint connects to the ELEGOO Centauri Carbon Canvas via SimplyPrint Client.
What is the ELEGOO Centauri Carbon Canvas's bed size and build volume?
The ELEGOO Centauri Carbon Canvas has a 256 x 256 mm print bed and prints up to 256 mm tall, a build volume of about 256 x 256 x 256 mm. See the full specifications table above for bed type, temperatures and more.
When did the ELEGOO Centauri Carbon Canvas come out?
ELEGOO launched the Centauri Carbon Canvas in 2025.
Can the ELEGOO Centauri Carbon Canvas eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
SimplyPrint Client 
PrusaSlicer
OrcaSlicer
BambuStudio
CrealityPrint
Cura
Kiri:Moto
