Connect the Sovol SV08 Max (Heat Chamber) to SimplyPrint
Does the Sovol SV08 Max (Heat Chamber) 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Sovol SV08 Max (Heat Chamber): the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes
AI failure detection
Yes
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
No1
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsNo1
Works
Depends
Not supported
SimplyPrint doesn't support this through this connection yet.
Sovol SV08 Max (Heat Chamber) owners on SimplyPrint
10+ printers use SimplyPrint
What slicer to use for the Sovol SV08 Max (Heat Chamber)
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Sovol SV08 Max (Heat Chamber), but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sovol SV08 Max (Heat Chamber).
Cloud-Based Slicer for Sovol SV08 Max (Heat Chamber)
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Sovol SV08 Max (Heat Chamber) models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Sovol SV08 Max (Heat Chamber): check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Sovol SV08 Max (Heat Chamber)
Sovol doesn't make an app for the Sovol SV08 Max (Heat Chamber). SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Sovol SV08 Max (Heat Chamber) in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Enclosed printers push their prints out
The Sovol SV08 Max (Heat Chamber)'s bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Sovol SV08 Max (Heat Chamber) specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
500 x 500 x 450 mm
Bed type
Square
Bed size
500 x 500 mm
Max print height
450 mm
Printing
Enclosure
Fully enclosed
Motion system
CoreXY
Max print speed
700 mm/s
Max extruder temperature
300 °C
Has heated bed
Yes
Max bed temperature
100 °C
Heated chamber
Yes
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
USB, Wi-Fi, Ethernet
Built-in camera
Yes
Supports serial printing
No
Shipped firmware
Klipper
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Sovol
Printer model name
SV08 Max (Heat Chamber)
Made by a company from
China
Launched
May 2025
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Sovol SV08 Max (Heat Chamber) print?
Filament compatibility for the Sovol SV08 Max (Heat Chamber): the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
Great
Enclosed, with a hot enough hotend and bed: ABS and ASA print well.
Nylon (PA)
Good
Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC)
Good
In range for PC. Dry the filament, print slowly, and use an enclosure for the best results.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Sovol SV08 Max (Heat Chamber)
Filaments the Sovol SV08 Max (Heat Chamber) prints well, Sovol's own first, then the best known.
Tested the SV08 Max with the enclosure kit. Finds it fast for its size, with quick eddy-current leveling and good results on TPU and ASA, but loud, with software quirks and a Z-offset that took several failed prints to dial in. Calls it an enthusiast machine that is not for beginners.
“It’s a niche machine, but it fills that niche extremely well.”
Frankly Built · May 14, 2026
An extended review of the open-frame SV08 Max (about $1,099). Likes it for statues and big props and calls it the best 500 mm printer on the market. Notes a loud idle fan, very long prints, and that it feels a generation behind Bambu or Prusa. Recommends remote monitoring.
Aurora Tech · June 24, 2025
Sovol sent the unit and sponsored the video (disclosed), tested without the enclosure. Fastest large printer he has tested, with a rigid self-leveling gantry and quick eddy-current leveling. Cons: flow ratio needed manual calibration, one-piece bed, a small 8 GB eMMC, loud even idle.
Compare the Sovol SV08 Max (Heat Chamber) with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Sovol SV08 Max (Heat Chamber), and how open Sovol leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker.
Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune.
Firmware and custom firmware ●●●●●
Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source.
[1][2][3]
Local control and integrations ●●●●●
The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement.
[5][4][1][11]
Third-party filament, slicers and parts ●●●●●
Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store.
[6][1][7]
Repairs and spare parts ●●●●●
Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made.
[7][1]
Community and documentation ●●●●●
Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source.
[8][1][9]
Pros
Standard Klipper with Mainsail on the local network, no account or cloud.
SV08 structure, electronics and firmware files are published.
Spare parts sold per model, and open designs make parts easy to source.
Low prices for Voron-style machines.
Cons
Damage caused by modified or third-party firmware voids the one-year warranty.
Sovol does not help with modifying its source code.
Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune.
Newer repositories (SV08 Max, Zero) have no licence file.
Track record
July 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges.
[10]
March 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team.
[1][8]
Researched from 11 sources, last checked October 18, 2026. Show sources
Is the Sovol SV08 Max (Heat Chamber) compatible with SimplyPrint?
Yes. You can connect the Sovol SV08 Max (Heat Chamber) to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Sovol SV08 Max (Heat Chamber) to SimplyPrint?
Follow our step-by-step setup guide for the Sovol SV08 Max (Heat Chamber). It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Sovol SV08 Max (Heat Chamber)?
Cura, PrusaSlicer and OrcaSlicer all work with the Sovol SV08 Max (Heat Chamber), and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Sovol SV08 Max (Heat Chamber)?
Yes, but OrcaSlicer has no built-in profile for the Sovol SV08 Max (Heat Chamber) that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Sovol SV08 Max (Heat Chamber) print?
Based on its specs (hotend up to 300C, heated bed up to 100C), the Sovol SV08 Max (Heat Chamber) handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Sovol SV08 Max (Heat Chamber) work with OctoPrint or Klipper?
The Sovol SV08 Max (Heat Chamber) works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Sovol SV08 Max (Heat Chamber)'s bed size and build volume?
The Sovol SV08 Max (Heat Chamber) has a 500 x 500 mm print bed and prints up to 450 mm tall, a build volume of about 500 x 500 x 450 mm. See the full specifications table above for bed type, temperatures and more.
When did the Sovol SV08 Max (Heat Chamber) come out?
Sovol launched the SV08 Max (Heat Chamber) in May 2025.
Can the Sovol SV08 Max (Heat Chamber) eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the Sovol SV08 Max (Heat Chamber)?
From Sovol's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
/product_photo_md.png?cacheid=6924cc4d28d34)
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
