Does the Tronxy XY2 PRO titan 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through OctoPrint, SimplyPrint supports everything the Tronxy XY2 PRO titan lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
OctoPrint
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Depends2
Files
Print binary G-code (.bgcode)
Depends3
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
Depends4
Connected to SimplyPrint through OctoPrint
Compatible
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsDepends2
Files
Print binary G-code (.bgcode)Depends3
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsDepends4
Works
Depends
Not supported
Needs a camera
Requires the OctoPrint plugin Cancel Objects
Requires the OctoPrint plugin BGCode
Requires version 4.2.0 or newer of the SimplyPrint plugin
Tronxy XY2 PRO titan owners on SimplyPrint
In use with SimplyPrint
What slicer to use for the Tronxy XY2 PRO titan
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy XY2 PRO titan, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy XY2 PRO titan.
Cloud-Based Slicer for Tronxy XY2 PRO titan
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Tronxy XY2 PRO titan models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Tronxy XY2 PRO titan: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Tronxy XY2 PRO titan
SimplyPrint works as the Tronxy XY2 PRO titan's app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Tronxy XY2 PRO titan in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Tronxy XY2 PRO titan specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
Build volume
255 x 255 x 260 mm
Bed type
Square
Bed size
255 x 255 mm
Max print height
260 mm
Printing
Max extruder temperature
260 °C
Has heated bed
Yes
Max bed temperature
110 °C
Number of nozzles
1
Direct drive
No
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Connecting
Supports serial printing
Yes
Shipped firmware
Marlin
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Tronxy
Printer model name
XY2 PRO titan
Made by a company from
China
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Tronxy XY2 PRO titan print?
Filament compatibility for the Tronxy XY2 PRO titan: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
With care
Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA
With care
The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
Not ideal
Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Tronxy XY2 PRO titan
Filaments the Tronxy XY2 PRO titan prints well, Tronxy's own first, then the best known.
Compare the Tronxy XY2 PRO titan with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Tronxy XY2 PRO titan, and how open Tronxy leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
Firmware and custom firmware ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
Local control and integrations ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
Third-party filament, slicers and parts ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
Repairs and spare parts ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
Community and documentation ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
Pros
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
Cons
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
Track record
October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
Researched from 11 sources, last checked October 18, 2026. Show sources
Is the Tronxy XY2 PRO titan compatible with SimplyPrint?
Yes. You can connect the Tronxy XY2 PRO titan to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Tronxy XY2 PRO titan to SimplyPrint?
Follow our step-by-step setup guide for the Tronxy XY2 PRO titan. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Tronxy XY2 PRO titan?
Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy XY2 PRO titan, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Tronxy XY2 PRO titan?
Yes, but OrcaSlicer has no built-in profile for the Tronxy XY2 PRO titan that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Tronxy XY2 PRO titan print?
Based on its specs (hotend up to 260C, heated bed up to 110C), the Tronxy XY2 PRO titan handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Tronxy XY2 PRO titan work with OctoPrint or Klipper?
The Tronxy XY2 PRO titan works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Tronxy XY2 PRO titan's bed size and build volume?
The Tronxy XY2 PRO titan has a 255 x 255 mm print bed and prints up to 260 mm tall, a build volume of about 255 x 255 x 260 mm. See the full specifications table above for bed type, temperatures and more.
Can the Tronxy XY2 PRO titan eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the Tronxy XY2 PRO titan?
From Tronxy's own store, which has shops for everywhere else and everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
OctoPrint 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
