Argentina
Hellbot Magna SE at a glance
The Hellbot Magna SE is a 3D printer by Hellbot with a 230 x 230 x 250 mm build volume.
- Build volume
- 230 x 230 x 250 mm
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA
Connect the Hellbot Magna SE to SimplyPrint
Does the Hellbot Magna SE 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
OctoPrint
Directly, over USB
Compatible
What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable
In use with SimplyPrint
-
Klipper (Moonraker)
Not compatible
- Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through OctoPrint, SimplyPrint supports everything the Hellbot Magna SE lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | OctoPrint Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Depends 2 |
| Files | |
| Print binary G-code (.bgcode) | Depends 3 |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | Depends 4 |
Connected to SimplyPrint through OctoPrint
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Depends 2
Files
- Print binary G-code (.bgcode) Depends 3
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Depends 4
Works Depends Not supported
- Needs a camera
- Requires the OctoPrint plugin Cancel Objects
- Requires the OctoPrint plugin BGCode
- Requires version 4.2.0 or newer of the SimplyPrint plugin
Hellbot Magna SE owners on SimplyPrint
In use with SimplyPrint
What slicer to use for the Hellbot Magna SE
Use Cura: it has a ready-made profile for the Hellbot Magna SE.
Ready-made profile for the Hellbot Magna SE
-
CuraRuns in the SimplyPrint cloud
No profile for the Hellbot Magna SE
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Hellbot Magna SE.
Cloud-Based Slicer for Hellbot Magna SE: Use Cura Online
Use Cura and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Hellbot Magna SE models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Hellbot Magna SE: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Hellbot Magna SE
SimplyPrint works as the Hellbot Magna SE's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Hellbot Magna SE
There's no plate swapper or auto-ejection kit for the Hellbot Magna SE in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Hellbot Magna SE specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
| Build volume | 230 x 230 x 250 mm |
|---|---|
| Bed type | Square |
| Bed size | 230 x 230 mm |
| Max print height | 250 mm |
Printing
| Max extruder temperature | 260 °C |
|---|---|
| Has heated bed | Yes |
| Max bed temperature | 80 °C |
| Number of nozzles | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Connecting
| Supports serial printing | Yes |
|---|---|
| Shipped firmware | Marlin |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Hellbot |
|---|---|
| Printer model name | Magna SE |
| Made by a company from | Argentina |
| Launched | 2022 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Hellbot Magna SE print?
Filament compatibility for the Hellbot Magna SE: the materials Hellbot lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Not ideal | Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure. |
| Polycarbonate (PC) | Not ideal | Not recommended - PC needs very high hotend temps and an enclosed chamber. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Hellbot Magna SE
Filaments the Hellbot Magna SE prints well, Hellbot's own first, then the best known.
Compare the Hellbot Magna SE with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Hellbot Magna SE PRO
230 x 230 x 250 mmLaunched 2023Connects with: OctoPrintAlso by Hellbot · Similar build volume · Also prints ABS & ASAExpected to work Compare side by side Hellbot Magna SE PRO -
Hellbot Magna Dual
220 x 220 x 260 mmLaunched 2020Connects with: OctoPrintAlso by Hellbot · Similar build volume · Also prints ABS & ASACompatible Compare side by side Hellbot Magna Dual -
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASAVerified by SimplyPrint Compare side by side Bambu Lab P1S -
Creality K1C
220 x 220 x 250 mmLaunched January 25, 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASACompatible Compare side by side Creality K1C
Where to buy the Hellbot Magna SE
Official store
Best for USA: Hellbot's global store
Bought straight from Hellbot, from the shop that serves where you are.
Somewhere else? Hellbot's other stores
Hellbot for the EUFrequently asked questions
Is the Hellbot Magna SE compatible with SimplyPrint?
Yes. You can connect the Hellbot Magna SE to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Hellbot Magna SE to SimplyPrint?
Follow our step-by-step setup guide for the Hellbot Magna SE. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Hellbot Magna SE?
We recommend Cura for the Hellbot Magna SE. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Hellbot Magna SE kept up to date automatically.
Can I use OrcaSlicer with the Hellbot Magna SE?
Yes, but OrcaSlicer has no built-in profile for the Hellbot Magna SE that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Hellbot Magna SE print?
Hellbot lists PLA, ABS & ASA and PETG for the Magna SE.
Does the Hellbot Magna SE work with OctoPrint or Klipper?
The Hellbot Magna SE works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Hellbot Magna SE's bed size and build volume?
The Hellbot Magna SE has a 230 x 230 mm print bed and prints up to 250 mm tall, a build volume of about 230 x 230 x 250 mm. See the full specifications table above for bed type, temperatures and more.
When did the Hellbot Magna SE come out?
Hellbot launched the Magna SE in 2022.
Can the Hellbot Magna SE eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the Hellbot Magna SE?
From Hellbot's own store, which has shops for the EU and everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.