Skip to main content

Monoprice MP 10 Mini: specs, SimplyPrint compatibility and setup

By Monoprice, USA

Monoprice MP 10 Mini image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: OctoPrint
Set it up Compare

Monoprice MP 10 Mini at a glance

The Monoprice MP 10 Mini is a 3D printer by Monoprice with a 200 x 200 x 180 mm build volume.

Build volume
200 x 200 x 180 mm
Max print speed
100 mm/s
Prints well
PLA, PETG
Connectivity
Wi-Fi, USB, SD card
All specifications

Connect the Monoprice MP 10 Mini to SimplyPrint

Does the Monoprice MP 10 Mini 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint supports everything the Monoprice MP 10 Mini lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Monoprice MP 10 Mini

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Monoprice MP 10 Mini, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Monoprice MP 10 Mini

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Monoprice MP 10 Mini.

Cloud-Based Slicer for Monoprice MP 10 Mini

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Monoprice MP 10 Mini models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Monoprice MP 10 Mini: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Monoprice MP 10 Mini

SimplyPrint works as the Monoprice MP 10 Mini's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Monoprice MP 10 Mini to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Monoprice MP 10 Mini

There's no plate swapper or auto-ejection kit for the Monoprice MP 10 Mini in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Monoprice MP 10 Mini specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 200 x 200 x 180 mm
Bed type Square
Bed size 200 x 200 mm
Max print height 180 mm

Printing

Max print speed 100 mm/s
Max extruder temperature 280 °C
Has heated bed Yes
Max bed temperature 110 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Connecting

Connectivity Wi-Fi, USB, SD card
Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Monoprice
Printer model name MP 10 Mini
Made by a company from USA

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Monoprice MP 10 Mini print?

Filament compatibility for the Monoprice MP 10 Mini: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Monoprice MP 10 Mini

Filaments the Monoprice MP 10 Mini prints well, Monoprice's own first, then the best known.

Find filament for the Monoprice MP 10 Mini All 3D printer filaments

Compare the Monoprice MP 10 Mini with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Monoprice MP 10 Mini with other printers All Monoprice printers

Frequently asked questions

Is the Monoprice MP 10 Mini compatible with SimplyPrint?

Yes. You can connect the Monoprice MP 10 Mini to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Monoprice MP 10 Mini to SimplyPrint?

Follow our step-by-step setup guide for the Monoprice MP 10 Mini. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Monoprice MP 10 Mini?

Cura, PrusaSlicer and OrcaSlicer all work with the Monoprice MP 10 Mini, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Monoprice MP 10 Mini?

Yes, but OrcaSlicer has no built-in profile for the Monoprice MP 10 Mini that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Monoprice MP 10 Mini print?

Based on its specs (hotend up to 280C, heated bed up to 110C), the Monoprice MP 10 Mini handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Monoprice MP 10 Mini work with OctoPrint or Klipper?

The Monoprice MP 10 Mini works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Monoprice MP 10 Mini's bed size and build volume?

The Monoprice MP 10 Mini has a 200 x 200 mm print bed and prints up to 180 mm tall, a build volume of about 200 x 200 x 180 mm. See the full specifications table above for bed type, temperatures and more.

Can the Monoprice MP 10 Mini eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.