Renkforce RF100 XL Plus: specs, SimplyPrint compatibility and setup

By Renkforce, Germany Launched 2017

Renkforce RF100 XL Plus image

Does it work with SimplyPrint?

Expected to work Most likely

Not confirmed yet, but we expect it to work like the Renkforce rf100v2.

Connects with: OctoPrint
Set it up Compare

Renkforce RF100 XL Plus at a glance

The Renkforce RF100 XL Plus is a 3D printer by Renkforce with a 200 x 200 x 200 mm build volume.

Build volume
200 x 200 x 200 mm
Max print speed
300 mm/s
Motion system
Other kinematics
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA
Built-in camera
No
Connectivity
USB, SD card
All specifications

Connect the Renkforce RF100 XL Plus to SimplyPrint

Does the Renkforce RF100 XL Plus 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Expected to work

    Through OctoPrint

    How to set up SimplyPrint on Renkforce RF100 XL Plus Help us confirm Be one of the first to confirm it
  • OctoPrint

    OctoPrint

    Directly, over USB

    Expected to work

    Manual: operated from a computer over USB ('Bedienung über Computer (USB)') with Cura sending G-code over the USB port, or standalone from SD/USB stick. Serial printing like the smaller RF100. Source

    Expected to work like the Renkforce rf100v2

    What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable

    How to set up OctoPrint on Renkforce RF100 XL Plus Help us confirm Be one of the first to confirm it
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Ships Renkforce's own firmware (V2.1); Klipper only after you install it. Source

    • Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Renkforce RF100 XL Plus lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Expected to work
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Expected to work

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Renkforce RF100 XL Plus

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Renkforce RF100 XL Plus, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Renkforce RF100 XL Plus

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Renkforce RF100 XL Plus.

Cloud-Based Slicer for Renkforce RF100 XL Plus

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Renkforce RF100 XL Plus models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Renkforce RF100 XL Plus: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Renkforce RF100 XL Plus

SimplyPrint works as the Renkforce RF100 XL Plus's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Renkforce RF100 XL Plus to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Renkforce RF100 XL Plus

There's no plate swapper or auto-ejection kit for the Renkforce RF100 XL Plus in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Renkforce RF100 XL Plus specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 200 x 200 x 200 mm
Bed type Square
Bed size 200 x 200 mm
Max print height 200 mm

Printing

Motion system Other kinematics
Max print speed 300 mm/s
Max extruder temperature 260 °C
Has heated bed Yes
Max bed temperature 120 °C
Number of nozzles 1
Toolheads 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB, SD card
Built-in camera No
Prints from SD card, USB stick
Supports serial printing Yes
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Renkforce
Printer model name RF100 XL Plus
Made by a company from Germany
Launched 2017

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Renkforce RF100 XL Plus print?

Filament compatibility for the Renkforce RF100 XL Plus: the materials Renkforce lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Renkforce RF100 XL Plus

Filaments the Renkforce RF100 XL Plus prints well, Renkforce's own first, then the best known.

Find filament for the Renkforce RF100 XL Plus All 3D printer filaments

Compare the Renkforce RF100 XL Plus with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Renkforce RF100 XL Plus with other printers All Renkforce printers

Frequently asked questions

Is the Renkforce RF100 XL Plus compatible with SimplyPrint?

Most likely. We expect the Renkforce RF100 XL Plus to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

How do I connect the Renkforce RF100 XL Plus to SimplyPrint?

Follow our step-by-step setup guide for the Renkforce RF100 XL Plus. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Renkforce RF100 XL Plus?

Cura, PrusaSlicer and OrcaSlicer all work with the Renkforce RF100 XL Plus, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Renkforce RF100 XL Plus?

Yes, but OrcaSlicer has no built-in profile for the Renkforce RF100 XL Plus that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Renkforce RF100 XL Plus print?

Renkforce lists PLA, TPU & flexibles and ABS & ASA for the RF100 XL Plus.

Does the Renkforce RF100 XL Plus work with OctoPrint or Klipper?

The Renkforce RF100 XL Plus works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Renkforce RF100 XL Plus's bed size and build volume?

The Renkforce RF100 XL Plus has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more.

When did the Renkforce RF100 XL Plus come out?

Renkforce launched the RF100 XL Plus in 2017.

Can the Renkforce RF100 XL Plus eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.