Kywoo3D Tycoon Slim: specs, SimplyPrint compatibility and setup

By Kywoo3D, China

Kywoo3D Tycoon Slim image

Does it work with SimplyPrint?

Expected to work Most likely

Not confirmed yet, but we expect it to work like the Kywoo3D Tycoon Max.

Connects with: OctoPrint
Set it up Compare

Kywoo3D Tycoon Slim at a glance

The Kywoo3D Tycoon Slim is a 3D printer by Kywoo3D with a 240 x 240 x 300 mm build volume.

Build volume
240 x 240 x 300 mm
Prints well
PLA, TPU & flexibles
All specifications

Connect the Kywoo3D Tycoon Slim to SimplyPrint

Does the Kywoo3D Tycoon Slim 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Kywoo3D Tycoon Slim lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Expected to work
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Expected to work

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Kywoo3D Tycoon Slim

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Kywoo3D Tycoon Slim, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Kywoo3D Tycoon Slim

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Kywoo3D Tycoon Slim.

Cloud-Based Slicer for Kywoo3D Tycoon Slim

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Kywoo3D Tycoon Slim models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Kywoo3D Tycoon Slim: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Kywoo3D Tycoon Slim

SimplyPrint works as the Kywoo3D Tycoon Slim's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Kywoo3D Tycoon Slim to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Kywoo3D Tycoon Slim

There's no plate swapper or auto-ejection kit for the Kywoo3D Tycoon Slim in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Kywoo3D Tycoon Slim specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 240 x 240 x 300 mm
Bed type Square
Bed size 240 x 240 mm
Max print height 300 mm

Printing

Max extruder temperature 300 °C
Has heated bed No
Number of nozzles 1
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Kywoo3D
Printer model name Tycoon Slim
Made by a company from China

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Kywoo3D Tycoon Slim print?

Filament compatibility for the Kywoo3D Tycoon Slim: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG With care Marginal - PETG prefers a hotter bed (~70-80C) than this printer reaches.
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA Not ideal Not recommended - the bed cannot reach the ~90-110C ABS and ASA need.
Nylon (PA) Not ideal Not recommended - nylon needs a hotter hotend (~250-270C) and ideally an enclosure.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Kywoo3D Tycoon Slim

Filaments the Kywoo3D Tycoon Slim prints well, Kywoo3D's own first, then the best known.

Find filament for the Kywoo3D Tycoon Slim All 3D printer filaments

Compare the Kywoo3D Tycoon Slim with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Kywoo3D Tycoon Slim with other printers All Kywoo3D printers

Frequently asked questions

Is the Kywoo3D Tycoon Slim compatible with SimplyPrint?

Most likely. We expect the Kywoo3D Tycoon Slim to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

How do I connect the Kywoo3D Tycoon Slim to SimplyPrint?

Follow our step-by-step setup guide for the Kywoo3D Tycoon Slim. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Kywoo3D Tycoon Slim?

Cura, PrusaSlicer and OrcaSlicer all work with the Kywoo3D Tycoon Slim, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Kywoo3D Tycoon Slim?

Yes, but OrcaSlicer has no built-in profile for the Kywoo3D Tycoon Slim that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Kywoo3D Tycoon Slim print?

Based on its specs (hotend up to 300C, no heated bed), the Kywoo3D Tycoon Slim handles PLA or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Kywoo3D Tycoon Slim work with OctoPrint or Klipper?

The Kywoo3D Tycoon Slim works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Kywoo3D Tycoon Slim's bed size and build volume?

The Kywoo3D Tycoon Slim has a 240 x 240 mm print bed and prints up to 300 mm tall, a build volume of about 240 x 240 x 300 mm. See the full specifications table above for bed type, temperatures and more.

Can the Kywoo3D Tycoon Slim eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.