China
MINGDA Raptor 1200 at a glance
The Raptor 1200 is Mingda's largest printer: a 1200 x 1200 x 1200 mm build volume, an 80 °C actively heated chamber, a 500 °C dual extruder and Klipper. It is for industrial users printing very large parts in ABS, ASA, PC, nylon and PPS.
- Build volume
- 1200 x 1200 x 1200 mm
- Enclosure
- Fully enclosed
- Max print speed
- 300 mm/s
- Prints well
- PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Connectivity
- Wi-Fi, Ethernet, USB
Connect the MINGDA Raptor 1200 to SimplyPrint
Does the MINGDA Raptor 1200 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
SimplyPrint
Expected to work
Through Klipper (Moonraker)
How to set up SimplyPrint on MINGDA Raptor 1200 Help us confirm Be one of the first to confirm it -
Klipper (Moonraker)
Expected to work
Spec table says Klipper firmware with Wi-Fi/Ethernet remote printing, the same MINGDA Klipper platform as the mingda-md-1000d, which ships Moonraker. Source
Expected to work like the MINGDA MD-1000D
What you need: Nothing extra: the printer runs Klipper as it ships
How to set up Mainsail on MINGDA Raptor 1200 How to set up Fluidd on MINGDA Raptor 1200 Help us confirm Be one of the first to confirm it -
OctoPrint
Directly, over USB
Not compatible
Ships Klipper; OctoPrint only runs on top of it. Source
- Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the MINGDA Raptor 1200: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Expected to work |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 2 |
Connected to SimplyPrint through Klipper (Moonraker)
Expected to work
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 2
Works Depends Not supported
- Needs a camera
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the MINGDA Raptor 1200
None of the slicers in SimplyPrint's cloud has a ready-made profile for the MINGDA Raptor 1200, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the MINGDA Raptor 1200
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the MINGDA Raptor 1200.
Cloud-Based Slicer for MINGDA Raptor 1200
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your MINGDA Raptor 1200 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your MINGDA Raptor 1200: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the MINGDA Raptor 1200
SimplyPrint works as the MINGDA Raptor 1200's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in the EU, under the GDPR.
Automate the MINGDA Raptor 1200
There's no plate swapper or auto-ejection kit for the MINGDA Raptor 1200 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
MINGDA Raptor 1200 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 1200 x 1200 x 1200 mm |
|---|---|
| Bed type | Square |
| Bed size | 1200 x 1200 mm |
| Max print height | 1200 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max print speed | 300 mm/s |
| Max extruder temperature | 500 °C |
| Has heated bed | Yes |
| Max bed temperature | 110 °C |
| Heated chamber | Up to 80 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Wi-Fi, Ethernet, USB |
|---|---|
| Prints from | USB stick |
| Supports serial printing | No |
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | MINGDA |
|---|---|
| Printer model name | Raptor 1200 |
| Made by a company from | China |
| Launched | 2026 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the MINGDA Raptor 1200 print?
Filament compatibility for the MINGDA Raptor 1200: the materials MINGDA lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the MINGDA Raptor 1200
Filaments the MINGDA Raptor 1200 prints well, MINGDA's own first, then the best known.
When to choose the MINGDA Raptor 1200
Choose the Raptor 1200 only when you need a 1.2 m cube of engineering-grade material in one piece and have the site for it: it needs three-phase 380 V power at up to 12,000 W and stands about 2 m tall and wide. For a smaller heated-chamber machine, the Raptor 800 or the 450 IDEX cost less and need less. We found no independent review and Mingda lists no price, so ask for references and sample prints.
Pros
- A 1200 x 1200 x 1200 mm build volume with an 80 °C heated chamber and bellows cover for large ABS, ASA and PC parts (Mingda).
- A 500 °C dual extruder, a 110 °C bed and a wide material list including PA, PPS-CF, PC-CF and PET-GF (Mingda).
- HEPA filtration, door-open detection and AI defect detection (Mingda).
- Servo motors, power-loss recovery, remote monitoring and a 15.6-inch touchscreen (Mingda).
- Runs Klipper, and is expected to work with SimplyPrint through Klipper (not yet confirmed).
Cons
- Needs three-phase 380 V power and up to 12,000 W (Mingda).
- A machine of 2006 x 1980 x 1975 mm, so it needs a dedicated space.
- We found no independent review and Mingda lists no price.
- SimplyPrint compatibility is expected rather than confirmed, and no camera is listed.
Who it suits
-
Schools Not a good fit
An industrial three-phase machine, far beyond a classroom.
-
Hobbyists Not a good fit
The size, power and cost put it out of reach for hobby use.
-
Businesses Can work
Unusually large heated-chamber engineering parts, but untested by reviewers and a major site commitment.
-
Print farms Not a good fit
One enormous machine per site, not a fleet of identical printers.
Written from the maker's information and independent reviews. Read more by the manufacturer
Compare the MINGDA Raptor 1200 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
MINGDA MD-1000 Pro+
1000 x 1000 x 1000 mmLaunched 2026Connects with: Klipper (Moonraker)Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledExpected to work Compare side by side MINGDA MD-1000 Pro+ -
MINGDA MD-600 Pro+
600 x 600 x 600 mmLaunched 2026Connects with: Klipper (Moonraker)Also by MINGDA · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledExpected to work Compare side by side MINGDA MD-600 Pro+ -
Modix Everest
970 x 1030 x 2000 mmLaunched March 2024Connects with: Duet (RepRapFirmware)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible Compare side by side Modix Everest -
Tronxy VEHO 1000-16A
1000 x 1000 x 1600 mmLaunched March 2026Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Expected to work Compare side by side Tronxy VEHO 1000-16A
Frequently asked questions
Is the MINGDA Raptor 1200 compatible with SimplyPrint?
Most likely. We expect the MINGDA Raptor 1200 to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.
How do I connect the MINGDA Raptor 1200 to SimplyPrint?
Follow our step-by-step setup guide for the MINGDA Raptor 1200. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the MINGDA Raptor 1200?
Cura, PrusaSlicer and OrcaSlicer all work with the MINGDA Raptor 1200, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the MINGDA Raptor 1200?
Yes, but OrcaSlicer has no built-in profile for the MINGDA Raptor 1200 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the MINGDA Raptor 1200 print?
MINGDA lists ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the Raptor 1200.
Does the MINGDA Raptor 1200 work with OctoPrint or Klipper?
The MINGDA Raptor 1200 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the MINGDA Raptor 1200's bed size and build volume?
The MINGDA Raptor 1200 has a 1200 x 1200 mm print bed and prints up to 1200 mm tall, a build volume of about 1200 x 1200 x 1200 mm. See the full specifications table above for bed type, temperatures and more.
When did the MINGDA Raptor 1200 come out?
MINGDA launched the Raptor 1200 in 2026.
Can the MINGDA Raptor 1200 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.