United Kingdom
Makertech 3D ProForge 3 at a glance
The Makertech 3D ProForge 3 is a 3D printer by Makertech 3D with a 300 x 300 x 300 mm build volume.
- Build volume
- 300 x 300 x 300 mm
- Enclosure
- Partly enclosed
- Motion system
- CoreXY
- Prints well
- PLA, PETG, TPU & flexibles
- Built-in camera
- No
- Connectivity
- SD card
Connect the Makertech 3D ProForge 3 to SimplyPrint
Does the Makertech 3D ProForge 3 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
OctoPrint
Directly, over USB
Compatible
Makertech's OctoPi upgrade guide connects a Raspberry Pi to the printer's BTT board over USB. Source
What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable
-
Klipper (Moonraker)
Not compatible
Ships Marlin 2.0.9.3 on a BTT board. Klipper only if you install it yourself. Source
- Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through OctoPrint, SimplyPrint supports everything the Makertech 3D ProForge 3 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | OctoPrint Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Depends 2 |
| Files | |
| Print binary G-code (.bgcode) | Depends 3 |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | Depends 4 |
Connected to SimplyPrint through OctoPrint
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Depends 2
Files
- Print binary G-code (.bgcode) Depends 3
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Depends 4
Works Depends Not supported
- Needs a camera
- Requires the OctoPrint plugin Cancel Objects
- Requires the OctoPrint plugin BGCode
- Requires version 4.2.0 or newer of the SimplyPrint plugin
What slicer to use for the Makertech 3D ProForge 3
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Makertech 3D ProForge 3, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the Makertech 3D ProForge 3
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Makertech 3D ProForge 3.
Cloud-Based Slicer for Makertech 3D ProForge 3
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Makertech 3D ProForge 3 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Makertech 3D ProForge 3: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Makertech 3D ProForge 3
SimplyPrint works as the Makertech 3D ProForge 3's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Makertech 3D ProForge 3
There's no plate swapper or auto-ejection kit for the Makertech 3D ProForge 3 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
The Makertech 3D ProForge 3's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.
Ways to automate it
- Push prints off with the toolhead On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Makertech 3D ProForge 3 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 300 x 300 x 300 mm |
|---|---|
| Bed type | Square |
| Bed size | 300 x 300 mm |
| Max print height | 300 mm |
Printing
| Enclosure | Partly enclosed |
|---|---|
| Motion system | CoreXY |
| Max extruder temperature | 400 °C |
| Has heated bed | Yes |
| Max bed temperature | 100 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | SD card |
|---|---|
| Built-in camera | No |
| Prints from | microSD card |
| Supports serial printing | Yes |
| Shipped firmware | Marlin |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Makertech 3D |
|---|---|
| Printer model name | ProForge 3 |
| Made by a company from | United Kingdom |
| Launched | 2022 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Makertech 3D ProForge 3 print?
Filament compatibility for the Makertech 3D ProForge 3: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Makertech 3D ProForge 3
Filaments the Makertech 3D ProForge 3 prints well, Makertech 3D's own first, then the best known.
Compare the Makertech 3D ProForge 3 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Makertech 3D ProForge 300
300 x 300 x 300 mmLaunched August 2024Connects with: Klipper (Moonraker)Also by Makertech 3D · Similar build volume -
Kentstrapper Zero HS
315 x 315 x 315 mmLaunched March 2023Connects with: SimplyPrint built inSimilar build volumeCompatible Compare side by side Kentstrapper Zero HS -
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volumeCompatible Compare side by side Creality K1 Max -
Snapmaker U1
270 x 270 x 270 mmLaunched 2025Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volumeCompatible Compare side by side Snapmaker U1
Frequently asked questions
Is the Makertech 3D ProForge 3 compatible with SimplyPrint?
Yes. You can connect the Makertech 3D ProForge 3 to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Makertech 3D ProForge 3 to SimplyPrint?
Follow our step-by-step setup guide for the Makertech 3D ProForge 3. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Makertech 3D ProForge 3?
Cura, PrusaSlicer and OrcaSlicer all work with the Makertech 3D ProForge 3, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Makertech 3D ProForge 3?
Yes, but OrcaSlicer has no built-in profile for the Makertech 3D ProForge 3 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Makertech 3D ProForge 3 print?
Based on its specs (hotend up to 400C, heated bed up to 100C), the Makertech 3D ProForge 3 handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Makertech 3D ProForge 3 work with OctoPrint or Klipper?
The Makertech 3D ProForge 3 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Makertech 3D ProForge 3's bed size and build volume?
The Makertech 3D ProForge 3 has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.
When did the Makertech 3D ProForge 3 come out?
Makertech 3D launched the ProForge 3 in 2022.
Can the Makertech 3D ProForge 3 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.