China
Vivedino Troodon 2.0 at a glance
The Vivedino Troodon 2.0 is a 3D printer by Vivedino with a 350 x 350 x 320 mm build volume.
- Build volume
- 350 x 350 x 320 mm
- Enclosure
- Fully enclosed
- Motion system
- CoreXY
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
Connect the Vivedino Troodon 2.0 to SimplyPrint
Does the Vivedino Troodon 2.0 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
OctoPrint
Directly, over USB
Compatible
What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable
-
Klipper (Moonraker)
Not compatible
- Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through OctoPrint, SimplyPrint supports everything the Vivedino Troodon 2.0 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | OctoPrint Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Depends 2 |
| Files | |
| Print binary G-code (.bgcode) | Depends 3 |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | Depends 4 |
Connected to SimplyPrint through OctoPrint
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Depends 2
Files
- Print binary G-code (.bgcode) Depends 3
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Depends 4
Works Depends Not supported
- Needs a camera
- Requires the OctoPrint plugin Cancel Objects
- Requires the OctoPrint plugin BGCode
- Requires version 4.2.0 or newer of the SimplyPrint plugin
What slicer to use for the Vivedino Troodon 2.0
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Vivedino Troodon 2.0, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the Vivedino Troodon 2.0
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Vivedino Troodon 2.0.
Cloud-Based Slicer for Vivedino Troodon 2.0
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Vivedino Troodon 2.0 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Vivedino Troodon 2.0: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Vivedino Troodon 2.0
SimplyPrint works as the Vivedino Troodon 2.0's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in the EU, under the GDPR.
Automate the Vivedino Troodon 2.0
There's no plate swapper or auto-ejection kit for the Vivedino Troodon 2.0 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
The Vivedino Troodon 2.0's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
- Push prints off with the toolhead On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Vivedino Troodon 2.0 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 350 x 350 x 320 mm |
|---|---|
| Bed type | Square |
| Bed size | 350 x 350 mm |
| Max print height | 320 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Motion system | CoreXY |
| Max extruder temperature | 500 °C |
| Has heated bed | Yes |
| Max bed temperature | 120 °C |
| Number of nozzles | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Connecting
| Supports serial printing | Yes |
|---|---|
| Shipped firmware | Marlin |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Vivedino |
|---|---|
| Printer model name | Troodon 2.0 |
| Made by a company from | China |
| Launched | 2022 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Vivedino Troodon 2.0 print?
Filament compatibility for the Vivedino Troodon 2.0: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Vivedino Troodon 2.0
Filaments the Vivedino Troodon 2.0 prints well, Vivedino's own first, then the best known.
Compare the Vivedino Troodon 2.0 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Creality K1 Max -
Creality K2 Plus Combo
350 x 350 x 350 mmLaunched July 31, 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Creality K2 Plus Combo -
Voron Voron Trident
350 x 350 x 250 mmLaunched August 31, 2021Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Voron Voron Trident -
FLSUN S1
320 x 320 x 430 mmLaunched June 3, 2024Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side FLSUN S1
Where to buy the Vivedino Troodon 2.0
Official store
Best for USA: Vivedino's global store
Bought straight from Vivedino, from the shop that serves where you are.
Frequently asked questions
Is the Vivedino Troodon 2.0 compatible with SimplyPrint?
Yes. You can connect the Vivedino Troodon 2.0 to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Vivedino Troodon 2.0 to SimplyPrint?
Follow our step-by-step setup guide for the Vivedino Troodon 2.0. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Vivedino Troodon 2.0?
Cura, PrusaSlicer and OrcaSlicer all work with the Vivedino Troodon 2.0, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Vivedino Troodon 2.0?
Yes, but OrcaSlicer has no built-in profile for the Vivedino Troodon 2.0 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Vivedino Troodon 2.0 print?
Based on its specs (hotend up to 500C, heated bed up to 120C), the Vivedino Troodon 2.0 handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Vivedino Troodon 2.0 work with OctoPrint or Klipper?
The Vivedino Troodon 2.0 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Vivedino Troodon 2.0's bed size and build volume?
The Vivedino Troodon 2.0 has a 350 x 350 mm print bed and prints up to 320 mm tall, a build volume of about 350 x 350 x 320 mm. See the full specifications table above for bed type, temperatures and more.
When did the Vivedino Troodon 2.0 come out?
Vivedino launched the Troodon 2.0 in 2022.
Can the Vivedino Troodon 2.0 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the Vivedino Troodon 2.0?
From Vivedino's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.