China
MINGDA MD-600 Pro+ at a glance
The MD-600 Pro+ is a fully enclosed Klipper industrial printer from Mingda with a 600 x 600 x 600 mm build volume, a 350 °C hotend and a temperature-controlled filament chamber. It is for workshops that need large prototypes, jigs and moulds in PLA, PETG and filled nylons.
- Build volume
- 600 x 600 x 600 mm
- Enclosure
- Fully enclosed
- Max print speed
- 300 mm/s
- Prints well
- PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, Ethernet, USB
Connect the MINGDA MD-600 Pro+ to SimplyPrint
Does the MINGDA MD-600 Pro+ 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
SimplyPrint
Expected to work
Through Klipper (Moonraker)
How to set up SimplyPrint on MINGDA MD-600 Pro+ Help us confirm Be one of the first to confirm it -
Klipper (Moonraker)
Expected to work
Spec table says Klipper firmware with Wi-Fi/Ethernet remote printing, the same MINGDA Klipper platform as the mingda-md-600d, which ships Moonraker. Source
Expected to work like the MINGDA MD-600D
What you need: Nothing extra: the printer runs Klipper as it ships
How to set up Mainsail on MINGDA MD-600 Pro+ How to set up Fluidd on MINGDA MD-600 Pro+ Help us confirm Be one of the first to confirm it -
OctoPrint
Directly, over USB
Not compatible
Ships Klipper; OctoPrint only runs on top of it. Source
- Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint is expected to support most of what it offers on the MINGDA MD-600 Pro+: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Expected to work |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes |
| AI failure detection | Yes |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 1 |
Connected to SimplyPrint through Klipper (Moonraker)
Expected to work
Monitoring
- Live status and progress Yes
- Webcam Yes
- AI failure detection Yes
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 1
Works Depends Not supported
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the MINGDA MD-600 Pro+
None of the slicers in SimplyPrint's cloud has a ready-made profile for the MINGDA MD-600 Pro+, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the MINGDA MD-600 Pro+
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the MINGDA MD-600 Pro+.
Cloud-Based Slicer for MINGDA MD-600 Pro+
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your MINGDA MD-600 Pro+ models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your MINGDA MD-600 Pro+: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the MINGDA MD-600 Pro+
SimplyPrint works as the MINGDA MD-600 Pro+'s app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in the EU, under the GDPR.
Automate the MINGDA MD-600 Pro+
There's no plate swapper or auto-ejection kit for the MINGDA MD-600 Pro+ in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
MINGDA MD-600 Pro+ specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 600 x 600 x 600 mm |
|---|---|
| Bed type | Square |
| Bed size | 600 x 600 mm |
| Max print height | 600 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max print speed | 300 mm/s |
| Max extruder temperature | 350 °C |
| Has heated bed | Yes |
| Max bed temperature | 110 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Wi-Fi, Ethernet, USB |
|---|---|
| Built-in camera | Yes |
| Prints from | USB stick |
| Supports serial printing | No |
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | MINGDA |
|---|---|
| Printer model name | MD-600 Pro+ |
| Made by a company from | China |
| Launched | 2026 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the MINGDA MD-600 Pro+ print?
Filament compatibility for the MINGDA MD-600 Pro+: the materials MINGDA lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the MINGDA MD-600 Pro+
Filaments the MINGDA MD-600 Pro+ prints well, MINGDA's own first, then the best known.
When to choose the MINGDA MD-600 Pro+
Choose the MD-600 Pro+ for large parts in a fully enclosed machine without paying for a dual-extruder or heated-chamber model. Mingda lists PLA, PETG and carbon- and glass-filled PET and nylon, not ABS or ASA, and states no chamber heating. If you want two materials in one print and ABS-CF/GF, the MD-600D Ultra is the dual-extruder step up; for heated-chamber engineering prints, the Raptor line. We found no independent review.
Pros
- A 600 x 600 x 600 mm build volume in a fully enclosed machine (Mingda).
- A 350 °C hotend, 110 °C bed and 300 mm/s top speed with input shaping and automatic levelling (Mingda).
- A temperature-controlled filament chamber and a built-in UPS for power-loss recovery (Mingda).
- A camera, Wi-Fi and Ethernet, and a 7-inch touchscreen (Mingda).
- Runs Klipper, and is expected to work with SimplyPrint through Klipper (not yet confirmed).
Cons
- No chamber heating is listed, and ABS and ASA are not on Mingda's material list.
- A single extruder with one spool tray and a 0.6 mm nozzle by default, so no multi-colour (Mingda).
- A large, industrial machine that needs space and a 1,400 W supply (Mingda).
- We found no independent review, and SimplyPrint compatibility is expected rather than confirmed.
Who it suits
-
Schools Not a good fit
Enclosed, but large, industrial and far beyond what a classroom needs.
-
Hobbyists Can work
Huge prints for a serious maker, but it is an industrial machine at an industrial price class.
-
Businesses Good fit
Large functional parts and prototypes in enclosed PLA, PETG and filled nylons, with camera and remote control; untested by reviewers.
-
Print farms Can work
Remote control and a UPS help, but each unit is big and no plate-clearing kit is in our sources.
Written from the maker's information and independent reviews. Read more by the manufacturer
Compare the MINGDA MD-600 Pro+ with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
MINGDA MD-600D Ultra
600 x 600 x 600 mmLaunched 2026Connects with: Klipper (Moonraker)Also by MINGDA · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledExpected to work Compare side by side MINGDA MD-600D Ultra -
MINGDA MD-600D
600 x 600 x 600 mmLaunched 2023Connects with: Klipper (Moonraker)Also by MINGDA · Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible Compare side by side MINGDA MD-600D -
Kentstrapper Bold 755
700 x 500 x 500 mmConnects with: SimplyPrint built inSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible Compare side by side Kentstrapper Bold 755 -
Bambu Lab P2S Combo
256 x 256 x 256 mmLaunched October 14, 2025Connects with: SimplyPrint ClientAlso prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledVerified by SimplyPrint Compare side by side Bambu Lab P2S Combo
Frequently asked questions
Is the MINGDA MD-600 Pro+ compatible with SimplyPrint?
Most likely. We expect the MINGDA MD-600 Pro+ to connect to SimplyPrint via Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.
How do I connect the MINGDA MD-600 Pro+ to SimplyPrint?
Follow our step-by-step setup guide for the MINGDA MD-600 Pro+. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the MINGDA MD-600 Pro+?
Cura, PrusaSlicer and OrcaSlicer all work with the MINGDA MD-600 Pro+, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the MINGDA MD-600 Pro+?
Yes, but OrcaSlicer has no built-in profile for the MINGDA MD-600 Pro+ that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the MINGDA MD-600 Pro+ print?
MINGDA lists PLA, PETG, Nylon (PA) and Carbon-fiber & glass-filled for the MD-600 Pro+.
Does the MINGDA MD-600 Pro+ work with OctoPrint or Klipper?
The MINGDA MD-600 Pro+ works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the MINGDA MD-600 Pro+'s bed size and build volume?
The MINGDA MD-600 Pro+ has a 600 x 600 mm print bed and prints up to 600 mm tall, a build volume of about 600 x 600 x 600 mm. See the full specifications table above for bed type, temperatures and more.
When did the MINGDA MD-600 Pro+ come out?
MINGDA launched the MD-600 Pro+ in 2026.
Can the MINGDA MD-600 Pro+ eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.