Skip to main content

The Industry Magnum: specs, SimplyPrint compatibility and setup

By The Industry, Sweden Launched 2019

The Industry Magnum image

Does it work with SimplyPrint?

Compatible We're sure

The maker builds SimplyPrint into the printer, so there's nothing to install.

Connects with: Built in by the manufacturer
Set it up Compare

The Industry Magnum at a glance

The The Industry Magnum is a 3D printer by The Industry with a 1500 x 1200 x 1200 mm build volume.

Build volume
1500 x 1200 x 1200 mm
Prints well
PLA, PETG
All specifications

Connect the The Industry Magnum to SimplyPrint

Does the The Industry Magnum 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What slicer to use for the The Industry Magnum

None of the slicers in SimplyPrint's cloud has a ready-made profile for the The Industry Magnum, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the The Industry Magnum

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the The Industry Magnum.

Cloud-Based Slicer for The Industry Magnum

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your The Industry Magnum models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your The Industry Magnum: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the The Industry Magnum

SimplyPrint works as the The Industry Magnum's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the The Industry Magnum to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the The Industry Magnum

There's no plate swapper or auto-ejection kit for the The Industry Magnum in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

The Industry Magnum specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 1500 x 1200 x 1200 mm
Bed type Rectangle
Bed size 1500 x 1200 mm
Max print height 1200 mm

Printing

Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 200 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Connecting

Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand The Industry
Printer model name Magnum
Made by a company from Sweden
Launched 2019

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the The Industry Magnum print?

Filament compatibility for the The Industry Magnum: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the The Industry Magnum

Filaments the The Industry Magnum prints well, The Industry's own first, then the best known.

Find filament for the The Industry Magnum All 3D printer filaments

Compare the The Industry Magnum with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the The Industry Magnum with other printers All The Industry printers

Frequently asked questions

Is the The Industry Magnum compatible with SimplyPrint?

Yes. The The Industry Magnum ships with SimplyPrint built in, so you can slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the The Industry Magnum to SimplyPrint?

Follow our step-by-step setup guide for the The Industry Magnum. It shows how to connect it via Built in by the manufacturer, what you need for each, and which to pick.

What slicer should I use for the The Industry Magnum?

Cura, PrusaSlicer and OrcaSlicer all work with the The Industry Magnum, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the The Industry Magnum?

Yes, but OrcaSlicer has no built-in profile for the The Industry Magnum that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the The Industry Magnum print?

Based on its specs (hotend up to 300C, heated bed up to 200C), the The Industry Magnum handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

What is the The Industry Magnum's bed size and build volume?

The The Industry Magnum has a 1500 x 1200 mm print bed and prints up to 1200 mm tall, a build volume of about 1500 x 1200 x 1200 mm. See the full specifications table above for bed type, temperatures and more.

When did the The Industry Magnum come out?

The Industry launched the Magnum in 2019.

Can the The Industry Magnum eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.