VzBoT Vz330 at a glance
The VzBoT Vz330 is a 3D printer by VzBoT with a 330 x 330 x 400 mm build volume.
- Build volume
- 330 x 330 x 400 mm
- Motion system
- CoreXY
- Prints well
- PLA, PETG
Connect the VzBoT Vz330 to SimplyPrint
Does the VzBoT Vz330 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Compatible
Open-source kit whose official firmware is a Klipper config (Mellow Fly Super8 plus a Raspberry Pi, Klipper's Linux MCU), with a Mainsail theme in the project; the builder installs it. Source
What you need: Nothing extra: the printer runs Klipper as it ships
-
OctoPrint
Directly, over USB
Not compatible
Runs Klipper; OctoPrint only on top of it. Source
- Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the VzBoT Vz330: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 2 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 2
Works Depends Not supported
- Needs a camera
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the VzBoT Vz330
None of the slicers in SimplyPrint's cloud has a ready-made profile for the VzBoT Vz330, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the VzBoT Vz330
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the VzBoT Vz330.
Cloud-Based Slicer for VzBoT Vz330
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your VzBoT Vz330 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your VzBoT Vz330: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the VzBoT Vz330
VzBoT doesn't make an app for the VzBoT Vz330. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the VzBoT Vz330
There's no plate swapper or auto-ejection kit for the VzBoT Vz330 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
The VzBoT Vz330's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.
Ways to automate it
- Push prints off with the toolhead On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
VzBoT Vz330 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 330 x 330 x 400 mm |
|---|---|
| Bed type | Square |
| Bed size | 330 x 330 mm |
| Max print height | 400 mm |
Printing
| Motion system | CoreXY |
|---|---|
| Max extruder temperature | 400 °C |
| Has heated bed | Yes |
| Max bed temperature | 130 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Supports serial printing | No |
|---|---|
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | VzBoT |
|---|---|
| Printer model name | Vz330 |
| Launched | 2021 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the VzBoT Vz330 print?
Filament compatibility for the VzBoT Vz330: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the VzBoT Vz330
Filaments the VzBoT Vz330 prints well, VzBoT's own first, then the best known.
Compare the VzBoT Vz330 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Prusa XL
360 x 360 x 360 mmLaunched March 13, 2023Connects with: SimplyPrint Client, OctoPrint, Prusa direct firmwareSimilar build volumeCompatible Compare side by side Prusa XL -
Sovol SV06 Plus
300 x 300 x 340 mmLaunched 2023Connects with: OctoPrintSimilar build volumeCompatible Compare side by side Sovol SV06 Plus -
Creality Ender-3 Max Neo
300 x 300 x 320 mmLaunched 2022Connects with: OctoPrintSimilar build volume -
Voron Voron Trident
350 x 350 x 250 mmLaunched August 31, 2021Connects with: Klipper (Moonraker)Similar build volumeCompatible Compare side by side Voron Voron Trident
Frequently asked questions
Is the VzBoT Vz330 compatible with SimplyPrint?
Yes. You can connect the VzBoT Vz330 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the VzBoT Vz330 to SimplyPrint?
Follow our step-by-step setup guide for the VzBoT Vz330. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the VzBoT Vz330?
Cura, PrusaSlicer and OrcaSlicer all work with the VzBoT Vz330, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the VzBoT Vz330?
Yes, but OrcaSlicer has no built-in profile for the VzBoT Vz330 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the VzBoT Vz330 print?
Based on its specs (hotend up to 400C, heated bed up to 130C), the VzBoT Vz330 handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the VzBoT Vz330 work with OctoPrint or Klipper?
The VzBoT Vz330 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the VzBoT Vz330's bed size and build volume?
The VzBoT Vz330 has a 330 x 330 mm print bed and prints up to 400 mm tall, a build volume of about 330 x 330 x 400 mm. See the full specifications table above for bed type, temperatures and more.
When did the VzBoT Vz330 come out?
VzBoT launched the Vz330 in 2021.
Can the VzBoT Vz330 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.