China
InfiMech TX at a glance
The InfiMech TX is a 3D printer by InfiMech with a 220 x 220 x 250 mm build volume.
- Build volume
- 220 x 220 x 250 mm
- Enclosure
- Fully enclosed
- Max print speed
- 500 mm/s
- Motion system
- CoreXY
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Built-in camera
- No
Connect the InfiMech TX to SimplyPrint
Does the InfiMech TX 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Compatible
Ships Klipper ('CoreXY Structure with Klipper Firmware') with Moonraker on port 7125 and Fluidd, LAN-reachable, no root step needed per the stock config backup. Source
What you need: Nothing extra: the printer runs Klipper as it ships
-
OctoPrint
Directly, over USB
Not compatible
Ships Klipper; OctoPrint only on top of it. Source
- Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the InfiMech TX: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 2 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 2
Works Depends Not supported
- Needs a camera
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the InfiMech TX
None of the slicers in SimplyPrint's cloud has a ready-made profile for the InfiMech TX, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the InfiMech TX
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the InfiMech TX.
Cloud-Based Slicer for InfiMech TX
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your InfiMech TX models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your InfiMech TX: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the InfiMech TX
SimplyPrint works as the InfiMech TX's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the InfiMech TX
There's no plate swapper or auto-ejection kit for the InfiMech TX in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
The InfiMech TX's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
- Push prints off with the toolhead On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
InfiMech TX specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 220 x 220 x 250 mm |
|---|---|
| Bed type | Square |
| Bed size | 220 x 220 mm |
| Max print height | 250 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Motion system | CoreXY |
| Max print speed | 500 mm/s |
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 120 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Built-in camera | No |
|---|---|
| Supports serial printing | No |
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | InfiMech |
|---|---|
| Printer model name | TX |
| Made by a company from | China |
| Launched | September 2023 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the InfiMech TX print?
Filament compatibility for the InfiMech TX: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | Enclosed, with a hot enough hotend and bed: ABS and ASA print well. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the InfiMech TX
Filaments the InfiMech TX prints well, InfiMech's own first, then the best known.
What reviewers say about the InfiMech TX
Reviews from people who test printers for a living. We link to them; the opinions are theirs.
In-depth test of the enclosed CoreXY Klipper printer: fast, accurate (cleared his 0.05 mm tolerance test) and prints PLA through nylon carbon fibre with a 120 C bed at this price. Cons: auto Z offset set too low, conservative slicer profiles, awkward rear filament loading, small free eMMC and an outdated firmware update method.
Compare the InfiMech TX with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint Compare side by side Bambu Lab P1S -
Bambu Lab P2S Combo
256 x 256 x 256 mmLaunched October 14, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint Compare side by side Bambu Lab P2S Combo -
Creality K1C
220 x 220 x 250 mmLaunched January 25, 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Creality K1C -
Creality K1
220 x 220 x 250 mmLaunched April 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Creality K1
Where to buy the InfiMech TX
Official store
Best for USA: InfiMech's global store
Bought straight from InfiMech, from the shop that serves where you are.
Frequently asked questions
Is the InfiMech TX compatible with SimplyPrint?
Yes. You can connect the InfiMech TX to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the InfiMech TX to SimplyPrint?
Follow our step-by-step setup guide for the InfiMech TX. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the InfiMech TX?
Cura, PrusaSlicer and OrcaSlicer all work with the InfiMech TX, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the InfiMech TX?
Yes, but OrcaSlicer has no built-in profile for the InfiMech TX that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the InfiMech TX print?
Based on its specs (hotend up to 300C, heated bed up to 120C), the InfiMech TX handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the InfiMech TX work with OctoPrint or Klipper?
The InfiMech TX works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the InfiMech TX's bed size and build volume?
The InfiMech TX has a 220 x 220 mm print bed and prints up to 250 mm tall, a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.
When did the InfiMech TX come out?
InfiMech launched the TX in September 2023.
Can the InfiMech TX eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the InfiMech TX?
From InfiMech's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.