USA
re:3D Gigabot 4 at a glance
The re:3D Gigabot 4 is a 3D printer by re:3D with a 590 x 600 x 600 mm build volume.
- Build volume
- 590 x 600 x 600 mm
- Enclosure
- Partly enclosed
- Max print speed
- 60 mm/s
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Connectivity
- Wi-Fi, USB
Connect the re:3D Gigabot 4 to SimplyPrint
Does the re:3D Gigabot 4 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Compatible
re:3D's flyer: 'LCD touchscreen with Mainsail for Klipper interface' on a Raspberry Pi with an ArchiMajor board; Mainsail runs on Moonraker. The batch notes say Moonraker is reachable. Source
What you need: Nothing extra: the printer runs Klipper as it ships
-
OctoPrint
Directly, over USB
Not compatible
Ships Klipper; OctoPrint only on top of it. Source
- Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the re:3D Gigabot 4: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 2 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 2
Works Depends Not supported
- Needs a camera
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the re:3D Gigabot 4
None of the slicers in SimplyPrint's cloud has a ready-made profile for the re:3D Gigabot 4, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the re:3D Gigabot 4
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the re:3D Gigabot 4.
Cloud-Based Slicer for re:3D Gigabot 4
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your re:3D Gigabot 4 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your re:3D Gigabot 4: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the re:3D Gigabot 4
re:3D doesn't make an app for the re:3D Gigabot 4. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the re:3D Gigabot 4
There's no plate swapper or auto-ejection kit for the re:3D Gigabot 4 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
re:3D Gigabot 4 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 590 x 600 x 600 mm |
|---|---|
| Bed type | Square |
| Bed size | 590 x 600 mm |
| Max print height | 600 mm |
Printing
| Enclosure | Partly enclosed |
|---|---|
| Max print speed | 60 mm/s |
| Max extruder temperature | 320 °C |
| Has heated bed | Yes |
| Max bed temperature | 115 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 2.85 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|
Connecting
| Connectivity | Wi-Fi, USB |
|---|---|
| Supports serial printing | No |
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | re:3D |
|---|---|
| Printer model name | Gigabot 4 |
| Made by a company from | USA |
| Launched | January 2023 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the re:3D Gigabot 4 print?
Filament compatibility for the re:3D Gigabot 4: the materials re:3D lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the re:3D Gigabot 4
Filaments the re:3D Gigabot 4 prints well, re:3D's own first, then the best known.
Compare the re:3D Gigabot 4 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
re:3D Terabot 4
915 x 915 x 1000 mmLaunched January 2023Connects with: Klipper (Moonraker)Also by re:3D · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side re:3D Terabot 4 -
MINGDA MD-600D
600 x 600 x 600 mmLaunched 2023Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side MINGDA MD-600D -
Tronxy VEHO 600 PRO V3
600 x 600 x 600 mmLaunched October 2025Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Tronxy VEHO 600 PRO V3 -
Kentstrapper Bold 755
700 x 500 x 500 mmConnects with: SimplyPrint built inSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Kentstrapper Bold 755
Where to buy the re:3D Gigabot 4
Official store
Best for USA: re:3D's global store
Bought straight from re:3D, from the shop that serves where you are.
Frequently asked questions
Is the re:3D Gigabot 4 compatible with SimplyPrint?
Yes. You can connect the re:3D Gigabot 4 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the re:3D Gigabot 4 to SimplyPrint?
Follow our step-by-step setup guide for the re:3D Gigabot 4. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the re:3D Gigabot 4?
Cura, PrusaSlicer and OrcaSlicer all work with the re:3D Gigabot 4, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the re:3D Gigabot 4?
Yes, but OrcaSlicer has no built-in profile for the re:3D Gigabot 4 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the re:3D Gigabot 4 print?
re:3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Polycarbonate (PC) for the Gigabot 4.
Does the re:3D Gigabot 4 work with OctoPrint or Klipper?
The re:3D Gigabot 4 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the re:3D Gigabot 4's bed size and build volume?
The re:3D Gigabot 4 has a 590 x 600 mm print bed and prints up to 600 mm tall, a build volume of about 590 x 600 x 600 mm. See the full specifications table above for bed type, temperatures and more.
When did the re:3D Gigabot 4 come out?
re:3D launched the Gigabot 4 in January 2023.
Can the re:3D Gigabot 4 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the re:3D Gigabot 4?
From re:3D's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.