The VEHO 800 Pro 2E is the dual-extruder version of Tronxy's open-frame 800 x 800 x 800 mm Klipper printer. It is for makers who want very large two-colour prints.
Does the Tronxy VEHO 800 Pro 2E 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Ships Klipper; OctoPrint only on top of it.
Source
Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Tronxy VEHO 800 Pro 2E: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
No2
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsNo2
Works
Depends
Not supported
Needs a camera
SimplyPrint doesn't support this through this connection yet.
What slicer to use for the Tronxy VEHO 800 Pro 2E
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy VEHO 800 Pro 2E, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy VEHO 800 Pro 2E.
Cloud-Based Slicer for Tronxy VEHO 800 Pro 2E
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Tronxy VEHO 800 Pro 2E models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Tronxy VEHO 800 Pro 2E: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Tronxy VEHO 800 Pro 2E
Tronxy doesn't make an app for the Tronxy VEHO 800 Pro 2E. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Tronxy VEHO 800 Pro 2E in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Tronxy VEHO 800 Pro 2E specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
800 x 800 x 800 mm
Bed type
Square
Bed size
800 x 800 mm
Max print height
800 mm
Printing
Enclosure
Open frame
Motion system
Other kinematics
Max print speed
300 mm/s
Max extruder temperature
320 °C
Has heated bed
Yes
Max bed temperature
110 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
Wi-Fi, Ethernet, USB
Prints from
USB stick
Supports serial printing
No
Shipped firmware
Klipper
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Tronxy
Printer model name
VEHO 800 Pro 2E
Made by a company from
China
Launched
April 2026
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Tronxy VEHO 800 Pro 2E print?
Filament compatibility for the Tronxy VEHO 800 Pro 2E: the materials Tronxy lists for it.
Filament
Suitability
Notes
PLA
Great
On the maker's list of materials for this printer.
PETG
Great
On the maker's list of materials for this printer.
TPU & flexibles
Great
On the maker's list of materials for this printer.
ABS & ASA
Great
On the maker's list of materials for this printer.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Tronxy VEHO 800 Pro 2E
Filaments the Tronxy VEHO 800 Pro 2E prints well, Tronxy's own first, then the best known.
Choose the 800 Pro 2E when you want two colours or two materials on one very large part and are happy with an open frame. If you only print one colour the VEHO 800 Pro costs less, and for a closed chamber the VEHO 800A is the choice; for smaller multi-colour work a printer with an automatic filament system is easier to live with.
Pros
Two independently driven extruders for dual-colour printing on an 800 x 800 x 800 mm plate (Tronxy).
Klipper with 100-point auto-leveling and power-off resume (Tronxy).
Works with SimplyPrint through Klipper, with Wi-Fi and Ethernet to connect it.
Seven linear guides, four independent Z motors and filament runout detection (Tronxy).
320 °C hotend and a silicone heated bed (Tronxy and our facts).
Cons
Open frame, so ABS and other warp-prone materials are hard on a plate this size.
Limited to two colours or materials at a time (Tronxy).
The maker's page lists no built-in camera. Add a camera for remote watching.
Tronxy's page quotes a high-speed print of 80 mm/s, much lower than the 600 mm/s of the single-extruder model, and we found no independent review.
Who it suits
SchoolsNot a good fit
Open, very large and hot; two extruders add complexity that a classroom does not need.
HobbyistsGood fit
Dual-colour printing at a scale few printers reach, if you are fine with an open frame.
BusinessesCan work
Useful for large two-colour display pieces; no chamber and no independent reliability data.
Print farmsNot a good fit
A very large dual-extruder machine with no camera is a poor fleet unit.
Compare the Tronxy VEHO 800 Pro 2E with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Tronxy VEHO 800 Pro 2E, and how open Tronxy leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
Firmware and custom firmware ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
Local control and integrations ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
Third-party filament, slicers and parts ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
Repairs and spare parts ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
Community and documentation ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
Pros
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
Cons
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
Track record
October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
Researched from 11 sources, last checked October 18, 2026. Show sources
Is the Tronxy VEHO 800 Pro 2E compatible with SimplyPrint?
Yes. You can connect the Tronxy VEHO 800 Pro 2E to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Tronxy VEHO 800 Pro 2E to SimplyPrint?
Follow our step-by-step setup guide for the Tronxy VEHO 800 Pro 2E. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Tronxy VEHO 800 Pro 2E?
Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy VEHO 800 Pro 2E, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Tronxy VEHO 800 Pro 2E?
Yes, but OrcaSlicer has no built-in profile for the Tronxy VEHO 800 Pro 2E that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Tronxy VEHO 800 Pro 2E print?
Tronxy lists PLA, ABS & ASA, PETG and TPU & flexibles for the VEHO 800 Pro 2E.
Does the Tronxy VEHO 800 Pro 2E work with OctoPrint or Klipper?
The Tronxy VEHO 800 Pro 2E works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Tronxy VEHO 800 Pro 2E's bed size and build volume?
The Tronxy VEHO 800 Pro 2E has a 800 x 800 mm print bed and prints up to 800 mm tall, a build volume of about 800 x 800 x 800 mm. See the full specifications table above for bed type, temperatures and more.
When did the Tronxy VEHO 800 Pro 2E come out?
Tronxy launched the VEHO 800 Pro 2E in April 2026.
Can the Tronxy VEHO 800 Pro 2E eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the Tronxy VEHO 800 Pro 2E?
From Tronxy's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
