China
Goofoo Mido at a glance
The Goofoo Mido is a 3D printer by Goofoo with a 200 x 200 x 200 mm build volume.
- Build volume
- 200 x 200 x 200 mm
- Enclosure
- Partly enclosed
- Max print speed
- 200 mm/s
- Motion system
- CoreXY
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Connectivity
- Wi-Fi, USB
Connect the Goofoo Mido to SimplyPrint
Does the Goofoo Mido 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
OctoPrint
Directly, over USB
Compatible
What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable
In use with SimplyPrint
-
Klipper (Moonraker)
Not compatible
- Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through OctoPrint, SimplyPrint supports everything the Goofoo Mido lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | OctoPrint Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Depends 2 |
| Files | |
| Print binary G-code (.bgcode) | Depends 3 |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | Depends 4 |
Connected to SimplyPrint through OctoPrint
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Depends 2
Files
- Print binary G-code (.bgcode) Depends 3
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Depends 4
Works Depends Not supported
- Needs a camera
- Requires the OctoPrint plugin Cancel Objects
- Requires the OctoPrint plugin BGCode
- Requires version 4.2.0 or newer of the SimplyPrint plugin
Goofoo Mido owners on SimplyPrint
In use with SimplyPrint
What slicer to use for the Goofoo Mido
Use Cura: it has a ready-made profile for the Goofoo Mido.
Ready-made profile for the Goofoo Mido
-
CuraRuns in the SimplyPrint cloud
No profile for the Goofoo Mido
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Goofoo Mido.
Cloud-Based Slicer for Goofoo Mido: Use Cura Online
Use Cura and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Goofoo Mido models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Goofoo Mido: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Goofoo Mido
SimplyPrint works as the Goofoo Mido's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Goofoo Mido
There's no plate swapper or auto-ejection kit for the Goofoo Mido in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
The Goofoo Mido's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
- Push prints off with the toolhead On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Goofoo Mido specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 200 x 200 x 200 mm |
|---|---|
| Bed type | Square |
| Bed size | 200 x 200 mm |
| Max print height | 200 mm |
Printing
| Enclosure | Partly enclosed |
|---|---|
| Motion system | CoreXY |
| Max print speed | 200 mm/s |
| Max extruder temperature | 280 °C |
| Has heated bed | Yes |
| Max bed temperature | 100 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | No |
| Filament width | 1.75 mm |
Connecting
| Connectivity | Wi-Fi, USB |
|---|---|
| Supports serial printing | Yes |
| Shipped firmware | Marlin |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Goofoo |
|---|---|
| Printer model name | Mido |
| Made by a company from | China |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Goofoo Mido print?
Filament compatibility for the Goofoo Mido: the materials Goofoo lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Goofoo Mido
Filaments the Goofoo Mido prints well, Goofoo's own first, then the best known.
Compare the Goofoo Mido with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Goofoo Mini+
200 x 200 x 150 mmConnects with: OctoPrintAlso by Goofoo · Similar build volume · Also prints ABS & ASA, Nylon (PA)Compatible Compare side by side Goofoo Mini+ -
Goofoo T-one Dual Extrusion
200 x 200 x 150 mmConnects with: OctoPrintAlso by Goofoo · Similar build volume · Also prints ABS & ASA -
Creality Ender-3 V4 Combo
220 x 220 x 235 mmLaunched November 2025Connects with: Klipper (Moonraker), SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled -
Creality K1C
220 x 220 x 250 mmLaunched January 25, 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA)Compatible Compare side by side Creality K1C
Frequently asked questions
Is the Goofoo Mido compatible with SimplyPrint?
Yes. You can connect the Goofoo Mido to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Goofoo Mido to SimplyPrint?
Follow our step-by-step setup guide for the Goofoo Mido. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Goofoo Mido?
We recommend Cura for the Goofoo Mido. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Goofoo Mido kept up to date automatically.
Can I use OrcaSlicer with the Goofoo Mido?
Yes, but OrcaSlicer has no built-in profile for the Goofoo Mido that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Goofoo Mido print?
Goofoo lists PLA, TPU & flexibles, ABS & ASA, Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the Mido.
Does the Goofoo Mido work with OctoPrint or Klipper?
The Goofoo Mido works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Goofoo Mido's bed size and build volume?
The Goofoo Mido has a 200 x 200 mm print bed and prints up to 200 mm tall, a build volume of about 200 x 200 x 200 mm. See the full specifications table above for bed type, temperatures and more.
Can the Goofoo Mido eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.