Hellbot Magna SE PRO: specs, SimplyPrint compatibility and setup

By Hellbot, Argentina Launched 2023

Hellbot Magna SE PRO image

Does it work with SimplyPrint?

Expected to work Most likely

Not confirmed yet, but we expect it to work like the Hellbot Magna SE.

Connects with: OctoPrint
Set it up Compare Buy from Hellbot

Hellbot Magna SE PRO at a glance

The Hellbot Magna SE PRO is a 3D printer by Hellbot with a 230 x 230 x 250 mm build volume.

Build volume
230 x 230 x 250 mm
Enclosure
Open frame
Max print speed
150 mm/s
Motion system
Bed slinger
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA
Connectivity
Wi-Fi, USB, SD card
All specifications

Connect the Hellbot Magna SE PRO to SimplyPrint

Does the Hellbot Magna SE PRO 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Hellbot Magna SE PRO lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Expected to work
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Expected to work

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Hellbot Magna SE PRO

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Hellbot Magna SE PRO, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Hellbot Magna SE PRO

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Hellbot Magna SE PRO.

Cloud-Based Slicer for Hellbot Magna SE PRO

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Hellbot Magna SE PRO models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Hellbot Magna SE PRO: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Hellbot Magna SE PRO

SimplyPrint works as the Hellbot Magna SE PRO's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Hellbot Magna SE PRO to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Hellbot Magna SE PRO

There's no plate swapper or auto-ejection kit for the Hellbot Magna SE PRO in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Bed slingers are the easiest to automate

The Hellbot Magna SE PRO moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead.

For example: JobOx · swapmod

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Hellbot Magna SE PRO specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 230 x 230 x 250 mm
Bed type Square
Bed size 230 x 230 mm
Max print height 250 mm

Printing

Enclosure Open frame
Motion system Bed slinger
Max print speed 150 mm/s
Max extruder temperature 260 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity Wi-Fi, USB, SD card
Prints from microSD card, USB stick
Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Hellbot
Printer model name Magna SE PRO
Made by a company from Argentina
Launched 2023

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Hellbot Magna SE PRO print?

Filament compatibility for the Hellbot Magna SE PRO: the materials Hellbot lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Hellbot Magna SE PRO

Filaments the Hellbot Magna SE PRO prints well, Hellbot's own first, then the best known.

Find filament for the Hellbot Magna SE PRO All 3D printer filaments

Compare the Hellbot Magna SE PRO with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Hellbot Magna SE PRO with other printers All Hellbot printers

Where to buy the Hellbot Magna SE PRO

Hellbot Official store

Best for USA: Hellbot's global store

Bought straight from Hellbot, from the shop that serves where you are.

Buy from Hellbot

Frequently asked questions

Is the Hellbot Magna SE PRO compatible with SimplyPrint?

Most likely. We expect the Hellbot Magna SE PRO to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

How do I connect the Hellbot Magna SE PRO to SimplyPrint?

Follow our step-by-step setup guide for the Hellbot Magna SE PRO. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Hellbot Magna SE PRO?

Cura, PrusaSlicer and OrcaSlicer all work with the Hellbot Magna SE PRO, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Hellbot Magna SE PRO?

Yes, but OrcaSlicer has no built-in profile for the Hellbot Magna SE PRO that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Hellbot Magna SE PRO print?

Hellbot lists PLA, PETG, TPU & flexibles and ABS & ASA for the Magna SE PRO.

Does the Hellbot Magna SE PRO work with OctoPrint or Klipper?

The Hellbot Magna SE PRO works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Hellbot Magna SE PRO's bed size and build volume?

The Hellbot Magna SE PRO has a 230 x 230 mm print bed and prints up to 250 mm tall, a build volume of about 230 x 230 x 250 mm. See the full specifications table above for bed type, temperatures and more.

When did the Hellbot Magna SE PRO come out?

Hellbot launched the Magna SE PRO in 2023.

Can the Hellbot Magna SE PRO eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

Where can I buy the Hellbot Magna SE PRO?

From Hellbot's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.