Zonestar Z9V5 Pro: specs, SimplyPrint compatibility and setup

By Zonestar, China Launched 2021

Zonestar Z9V5 Pro image

Does it work with SimplyPrint?

Expected to work Most likely

Not confirmed yet, but we expect it to work like the Zonestar Z8.

Connects with: OctoPrint
Set it up Compare Buy from Zonestar

Zonestar Z9V5 Pro at a glance

The Zonestar Z9V5 Pro is a 3D printer by Zonestar with a 300 x 300 x 400 mm build volume.

Build volume
300 x 300 x 400 mm
Max print speed
100 mm/s
Motion system
CoreXY
Prints well
PLA, PETG
Connectivity
USB, SD card
All specifications

Connect the Zonestar Z9V5 Pro to SimplyPrint

Does the Zonestar Z9V5 Pro 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the Zonestar Z9V5 Pro lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Expected to work
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Expected to work

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Zonestar Z9V5 Pro

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Zonestar Z9V5 Pro, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Zonestar Z9V5 Pro

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zonestar Z9V5 Pro.

Cloud-Based Slicer for Zonestar Z9V5 Pro

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Zonestar Z9V5 Pro models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Zonestar Z9V5 Pro: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Zonestar Z9V5 Pro

Zonestar doesn't make an app for the Zonestar Z9V5 Pro. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Zonestar Z9V5 Pro to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Zonestar Z9V5 Pro

There's no plate swapper or auto-ejection kit for the Zonestar Z9V5 Pro in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

CoreXY printers push their prints off

The Zonestar Z9V5 Pro's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Zonestar Z9V5 Pro specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 300 x 300 x 400 mm
Bed type Square
Bed size 300 x 300 mm
Max print height 400 mm

Printing

Motion system CoreXY
Max print speed 100 mm/s
Max extruder temperature 260 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Toolheads 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB, SD card
Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Zonestar
Printer model name Z9V5 Pro
Made by a company from China
Launched 2021
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Zonestar Z9V5 Pro print?

Filament compatibility for the Zonestar Z9V5 Pro: the materials Zonestar lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Zonestar Z9V5 Pro

Filaments the Zonestar Z9V5 Pro prints well, Zonestar's own first, then the best known.

Find filament for the Zonestar Z9V5 Pro All 3D printer filaments

Compare the Zonestar Z9V5 Pro with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Zonestar Z9V5 Pro with other printers All Zonestar printers

Where to buy the Zonestar Z9V5 Pro

Zonestar Official store

Best for USA: Zonestar's global store

Bought straight from Zonestar, from the shop that serves where you are.

Buy from Zonestar

Frequently asked questions

Is the Zonestar Z9V5 Pro compatible with SimplyPrint?

Most likely. We expect the Zonestar Z9V5 Pro to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

How do I connect the Zonestar Z9V5 Pro to SimplyPrint?

Follow our step-by-step setup guide for the Zonestar Z9V5 Pro. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Zonestar Z9V5 Pro?

Cura, PrusaSlicer and OrcaSlicer all work with the Zonestar Z9V5 Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Zonestar Z9V5 Pro?

Yes, but OrcaSlicer has no built-in profile for the Zonestar Z9V5 Pro that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Zonestar Z9V5 Pro print?

Zonestar lists PLA and PETG for the Z9V5 Pro.

Does the Zonestar Z9V5 Pro work with OctoPrint or Klipper?

The Zonestar Z9V5 Pro works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Zonestar Z9V5 Pro's bed size and build volume?

The Zonestar Z9V5 Pro has a 300 x 300 mm print bed and prints up to 400 mm tall, a build volume of about 300 x 300 x 400 mm. See the full specifications table above for bed type, temperatures and more.

When did the Zonestar Z9V5 Pro come out?

Zonestar launched the Z9V5 Pro in 2021.

Can the Zonestar Z9V5 Pro eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

Where can I buy the Zonestar Z9V5 Pro?

From Zonestar's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.