Does the Geeetech A10 Pro 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Like the A10: Geeetech's A10/A20 line runs Marlin on the GT2560 with a USB port. The Pro's firmware and USB port are not confirmed by a Geeetech source.
Source
Connected through OctoPrint, SimplyPrint is expected to support everything the Geeetech A10 Pro lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
OctoPrint
Expected to work
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Depends2
Files
Print binary G-code (.bgcode)
Depends3
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
Depends4
Connected to SimplyPrint through OctoPrint
Expected to work
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsDepends2
Files
Print binary G-code (.bgcode)Depends3
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsDepends4
Works
Depends
Not supported
Needs a camera
Requires the OctoPrint plugin Cancel Objects
Requires the OctoPrint plugin BGCode
Requires version 4.2.0 or newer of the SimplyPrint plugin
What slicer to use for the Geeetech A10 Pro
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Geeetech A10 Pro, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Geeetech A10 Pro.
Cloud-Based Slicer for Geeetech A10 Pro
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Geeetech A10 Pro models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Geeetech A10 Pro: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Geeetech A10 Pro
SimplyPrint works as the Geeetech A10 Pro's app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Geeetech A10 Pro in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Geeetech A10 Pro specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
Build volume
220 x 220 x 260 mm
Bed type
Square
Bed size
220 x 220 mm
Max print height
260 mm
Printing
Max extruder temperature
250 °C
Has heated bed
Yes
Max bed temperature
100 °C
Number of nozzles
1
Direct drive
No
Probing tool / Auto Bed Leveling
No
Filament width
1.75 mm
Connecting
Supports serial printing
Unknown
Shipped firmware
Unknown
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Geeetech
Printer model name
A10 Pro
Made by a company from
China
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Geeetech A10 Pro print?
Filament compatibility for the Geeetech A10 Pro: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
With care
Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA
With care
The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
Not ideal
Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Compare the Geeetech A10 Pro with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Geeetech A10 Pro, and how open Geeetech leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mostly open (3.6 of 5)
Mostly open
Walled gardenOpen
Geeetech (HK GETECH Co., Limited, with its office at Shenzhen Getech Technology) is a Chinese 3D printer and filament maker that says it has worked on 3D printers since 2011. It made a long line of budget printers, from Prusa i3 kits through the A10/A20/A30, Mizar and Thunder series, and now sells the compact M1 and M1S for children and beginners alongside a large filament range.
Founded:
2011 ·
Headquarters:
Shenzhen, China (company registered in Hong Kong) ·
Ownership:
HK GETECH Co., Limited; China office Shenzhen Getech Technology Co., Ltd ·
Website:www.geeetech.com
Mostly open, with a caveat: the older printers came with published Marlin source and schematics, while the current M1 line has closed firmware but still runs locally with any filament and open slicers.
Firmware and custom firmware ●●●●●
Geeetech published Marlin-based firmware source and board schematics for its earlier printers on GitHub (Geeetech3D) and its download centre, including open-source files for the Mizar S updated until 2024. For the current M1 and M1S it offers firmware binaries only; we found no source.
[11][12][9][7]
Local control and integrations ●●●●●
The M1 Mini prints from a TF card or over USB with no account. The M1S adds Wi-Fi and the Geeetech app for printing from its model library 'anywhere', a remote feature that runs through Geeetech's app. Geeetech documents no network interface for other software, and for these models it offers only firmware binaries.
[4][5][8]
Third-party filament, slicers and parts ●●●●●
Any 1.75 mm filament (PLA and TPU on the M1), and Geeetech publishes Cura and OrcaSlicer profiles for it. Nozzles and hot-end parts for the M1 are Geeetech's own, sold in its store.
[4][7][10]
Repairs and spare parts ●●●●●
Geeetech sells M1 parts (hotbed, nozzles, hot-end components, PEI plate) and posts videos on replacing the nozzle and the motherboard; schematics for older boards are published.
[10][7][9]
Community and documentation ●●●●●
A long-running wiki, a download centre with manuals, firmware, profiles and videos per model, and GitHub repositories. Independent coverage of the current M1 line is scarce.
[13][6][11]
Pros
Inexpensive compact printers aimed at children and beginners.
Any 1.75 mm filament, with Cura and OrcaSlicer profiles published.
Spare nozzles, hotbeds and hot-end parts for the M1, plus repair videos.
Downloads (manuals, firmware) kept online for printers going back many years.
Cons
No published firmware source for the current M1 and M1S.
The M1S's remote printing runs through Geeetech's phone app; we found no privacy terms covering the app.
Small 100 x 110 x 100 mm build volume on the M1.
Little independent testing of the current models that we could find.
Track record
November 2025: Geeetech added the M1S, an M1 with Wi-Fi and a phone app; its app was posted in September 2025 and its quick guide in November 2025.
[8]
February 2025: Geeetech released the M1 mini printer for children and beginners; its first setup and maintenance videos were posted in February 2025 and its manual in March 2025.
[7]
October 2022: Geeetech published open-source files for the Mizar S on GitHub, updated until March 2024; files for the Mizar and Mizar Pro followed in November 2022.
[12][11]
Researched from 13 sources, last checked October 18, 2026. Show sources
Is the Geeetech A10 Pro compatible with SimplyPrint?
Most likely. We expect the Geeetech A10 Pro to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.
How do I connect the Geeetech A10 Pro to SimplyPrint?
Follow our step-by-step setup guide for the Geeetech A10 Pro. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Geeetech A10 Pro?
Cura, PrusaSlicer and OrcaSlicer all work with the Geeetech A10 Pro, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Geeetech A10 Pro?
Yes, but OrcaSlicer has no built-in profile for the Geeetech A10 Pro that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Geeetech A10 Pro print?
Based on its specs (hotend up to 250C, heated bed up to 100C), the Geeetech A10 Pro handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Geeetech A10 Pro work with OctoPrint or Klipper?
The Geeetech A10 Pro works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Geeetech A10 Pro's bed size and build volume?
The Geeetech A10 Pro has a 220 x 220 mm print bed and prints up to 260 mm tall, a build volume of about 220 x 220 x 260 mm. See the full specifications table above for bed type, temperatures and more.
Can the Geeetech A10 Pro eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
China
OctoPrint 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
