Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Sovol SV07: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
No2
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsNo2
Works
Depends
Not supported
Needs a camera
SimplyPrint doesn't support this through this connection yet.
Sovol SV07 owners on SimplyPrint
25+ printers use SimplyPrint
What slicer to use for the Sovol SV07
Use OrcaSlicer, ElegooSlicer, or CrealityPrint: each has a ready-made profile for the Sovol SV07.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sovol SV07.
Cloud-Based Slicer for Sovol SV07: Use OrcaSlicer Online
Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Sovol SV07 models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Sovol SV07: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Sovol SV07
Sovol doesn't make an app for the Sovol SV07. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Sovol SV07 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Bed slingers are the easiest to automate
The Sovol SV07 moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead.
Sovol SV07 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
Build volume
220 x 220 x 250 mm
Bed type
Square
Bed size
220 x 220 mm
Max print height
250 mm
Printing
Motion system
Bed slinger
Max print speed
500 mm/s
Max extruder temperature
300 °C
Has heated bed
Yes
Max bed temperature
100 °C
Number of nozzles
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Connecting
Connectivity
Wi-Fi, Ethernet, USB
Built-in camera
No
Supports serial printing
No
Shipped firmware
Klipper
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Sovol
Printer model name
SV07
Made by a company from
China
Launched
2023
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Sovol SV07 print?
Filament compatibility for the Sovol SV07: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
With care
The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Sovol SV07
Filaments the Sovol SV07 prints well, Sovol's own first, then the best known.
Finds the SV07 one of the easiest Klipper printers to set up and use, with a Klipper screen, accelerometer, direct drive, all-metal hotend, auto bed leveling and strong cooling at $339. Cons: loud, and painted lines peeled off the build plate. It cannot quite match a Core XY machine.
“The Sovol SV07 does Klipper the right way by including a Klipper screen, accelerometer and tons of cooling power.”
Aurora Tech · July 13, 2023
Tests the SV07 at 250 mm/s and 8k acceleration with PLA, then TPU, PETG and polycarbonate, plus WiFi setup in Cura; has chapters on pros, cons and conclusions. The title calls it an impressive low-priced Klipper bed slinger with some drawbacks.
Maker's Muse · May 31, 2023
Review of the SV07 as a budget i3 with Klipper and some odd design decisions compared with the SV06, asking whether fast means good; the title says he was impressed. Sovol sent the unit free, and he states no money changed hands.
Compare the Sovol SV07 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Sovol SV07, and how open Sovol leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker.
Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune.
Firmware and custom firmware ●●●●●
Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source.
[1][2][3]
Local control and integrations ●●●●●
The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement.
[5][4][1][11]
Third-party filament, slicers and parts ●●●●●
Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store.
[6][1][7]
Repairs and spare parts ●●●●●
Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made.
[7][1]
Community and documentation ●●●●●
Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source.
[8][1][9]
Pros
Standard Klipper with Mainsail on the local network, no account or cloud.
SV08 structure, electronics and firmware files are published.
Spare parts sold per model, and open designs make parts easy to source.
Low prices for Voron-style machines.
Cons
Damage caused by modified or third-party firmware voids the one-year warranty.
Sovol does not help with modifying its source code.
Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune.
Newer repositories (SV08 Max, Zero) have no licence file.
Track record
July 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges.
[10]
March 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team.
[1][8]
Researched from 11 sources, last checked October 18, 2026. Show sources
Yes. You can connect the Sovol SV07 to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Sovol SV07 to SimplyPrint?
Follow our step-by-step setup guide for the Sovol SV07. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Sovol SV07?
We recommend OrcaSlicer for the Sovol SV07. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Sovol SV07 kept up to date automatically.
Can I use OrcaSlicer with the Sovol SV07?
Yes. OrcaSlicer comes with a profile for the Sovol SV07, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the Sovol SV07 print?
Based on its specs (hotend up to 300C, heated bed up to 100C), the Sovol SV07 handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Sovol SV07 work with OctoPrint or Klipper?
The Sovol SV07 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Sovol SV07's bed size and build volume?
The Sovol SV07 has a 220 x 220 mm print bed and prints up to 250 mm tall, a build volume of about 220 x 220 x 250 mm. See the full specifications table above for bed type, temperatures and more.
When did the Sovol SV07 come out?
Sovol launched the SV07 in 2023.
Can the Sovol SV07 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
Klipper (Moonraker) 
PrusaSlicer
BambuStudio
Cura
Kiri:Moto
