CreatBot PEEK-300: specs, SimplyPrint compatibility and setup

By CreatBot, China

CreatBot PEEK-300 image

Does it work with SimplyPrint?

Expected to work Most likely

Not confirmed yet, but we expect it to work like the CreatBot F430.

Connects with: OctoPrint
Set it up Compare

CreatBot PEEK-300 at a glance

The CreatBot PEEK-300 is a 3D printer by CreatBot with a 300 x 300 x 400 mm build volume.

Build volume
300 x 300 x 400 mm
Enclosure
Fully enclosed
Max print speed
180 mm/s
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
Connectivity
USB
All specifications

Connect the CreatBot PEEK-300 to SimplyPrint

Does the CreatBot PEEK-300 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint is expected to support everything the CreatBot PEEK-300 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Expected to work
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Expected to work

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the CreatBot PEEK-300

None of the slicers in SimplyPrint's cloud has a ready-made profile for the CreatBot PEEK-300, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the CreatBot PEEK-300

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the CreatBot PEEK-300.

Cloud-Based Slicer for CreatBot PEEK-300

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your CreatBot PEEK-300 models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your CreatBot PEEK-300: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the CreatBot PEEK-300

SimplyPrint works as the CreatBot PEEK-300's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the CreatBot PEEK-300 to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the CreatBot PEEK-300

There's no plate swapper or auto-ejection kit for the CreatBot PEEK-300 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

CreatBot PEEK-300 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 300 x 300 x 400 mm
Bed type Square
Bed size 300 x 300 mm
Max print height 400 mm

Printing

Enclosure Fully enclosed
Max print speed 180 mm/s
Max extruder temperature 480 °C
Has heated bed Yes
Max bed temperature 200 °C
Heated chamber Up to 120 °C
Number of nozzles 2
Toolheads 2
Direct drive Yes
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity USB
Prints from USB stick
Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand CreatBot
Printer model name PEEK-300
Made by a company from China
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the CreatBot PEEK-300 print?

Filament compatibility for the CreatBot PEEK-300: the materials CreatBot lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.
High-temperature (PEI, PEEK, PEKK) Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the CreatBot PEEK-300

Filaments the CreatBot PEEK-300 prints well, CreatBot's own first, then the best known.

Find filament for the CreatBot PEEK-300 All 3D printer filaments

Compare the CreatBot PEEK-300 with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the CreatBot PEEK-300 with other printers All CreatBot printers

Frequently asked questions

Is the CreatBot PEEK-300 compatible with SimplyPrint?

Most likely. We expect the CreatBot PEEK-300 to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.

How do I connect the CreatBot PEEK-300 to SimplyPrint?

Follow our step-by-step setup guide for the CreatBot PEEK-300. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the CreatBot PEEK-300?

Cura, PrusaSlicer and OrcaSlicer all work with the CreatBot PEEK-300, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the CreatBot PEEK-300?

Yes, but OrcaSlicer has no built-in profile for the CreatBot PEEK-300 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the CreatBot PEEK-300 print?

CreatBot lists PLA, PETG, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the PEEK-300.

Does the CreatBot PEEK-300 work with OctoPrint or Klipper?

The CreatBot PEEK-300 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the CreatBot PEEK-300's bed size and build volume?

The CreatBot PEEK-300 has a 300 x 300 mm print bed and prints up to 400 mm tall, a build volume of about 300 x 300 x 400 mm. See the full specifications table above for bed type, temperatures and more.

Can the CreatBot PEEK-300 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.