Netherlands
Tractus3D T1250 at a glance
The Tractus3D T1250 is a 3D printer by Tractus3D with a 350 x 350 x 600 mm build volume.
- Build volume
- 350 x 350 x 600 mm
- Motion system
- Delta
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
- Connectivity
- Ethernet
Connect the Tractus3D T1250 to SimplyPrint
Does the Tractus3D T1250 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Duet (RepRapFirmware)
Compatible
Runs RepRapFirmware: the maker's manual sets the network with M552 in config.g through the RRF web interface and uploads firmware there (Duet-style). Check it is a Duet board. Source
What you need: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client
-
OctoPrint
Directly, over USB
Not expected to work
Takes jobs over LAN through the RepRapFirmware web interface; the manual names no USB connection for a computer. Source
-
Klipper (Moonraker)
Not compatible
Ships RepRapFirmware; Klipper only after you install it. Source
- Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through Duet (RepRapFirmware), SimplyPrint supports everything the Tractus3D T1250 lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Duet (RepRapFirmware) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | Yes |
Connected to SimplyPrint through Duet (RepRapFirmware)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Yes
Works Depends Not supported
- Needs a camera
What slicer to use for the Tractus3D T1250
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tractus3D T1250, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the Tractus3D T1250
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tractus3D T1250.
Cloud-Based Slicer for Tractus3D T1250
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Tractus3D T1250 models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Tractus3D T1250: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Tractus3D T1250
Tractus3D doesn't make an app for the Tractus3D T1250. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Tractus3D T1250
There's no plate swapper or auto-ejection kit for the Tractus3D T1250 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Tractus3D T1250 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 350 x 350 x 600 mm |
|---|---|
| Bed type | Circle |
| Bed size | 350 mm diameter |
| Max print height | 600 mm |
Printing
| Motion system | Delta |
|---|---|
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 120 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Ethernet |
|---|---|
| Supports serial printing | No |
| Shipped firmware | RepRapFirmware (Duet) |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Tractus3D |
|---|---|
| Printer model name | T1250 |
| Made by a company from | Netherlands |
| Launched | 2018 |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Tractus3D T1250 print?
Filament compatibility for the Tractus3D T1250: the materials Tractus3D lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Tractus3D T1250
Filaments the Tractus3D T1250 prints well, Tractus3D's own first, then the best known.
Compare the Tractus3D T1250 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Sovol SV08 Max (Heat Chamber)
/product_photo_md.png?cacheid=6924cc4d28d34)
500 x 500 x 450 mmLaunched May 2025Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC) -
QIDI Max4 Combo
390 x 390 x 340 mmLaunched 2026Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side QIDI Max4 Combo -
WASP 4070 FX
400 x 400 x 700 mmConnects with: OctoPrintSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side WASP 4070 FX -
WASP 4070 ZX
400 x 400 x 700 mmConnects with: OctoPrintSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side WASP 4070 ZX
Frequently asked questions
Is the Tractus3D T1250 compatible with SimplyPrint?
Yes. You can connect the Tractus3D T1250 to SimplyPrint via Duet (RepRapFirmware), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Tractus3D T1250 to SimplyPrint?
Follow our step-by-step setup guide for the Tractus3D T1250. It shows how to connect it via Duet (RepRapFirmware), what you need for each, and which to pick.
What slicer should I use for the Tractus3D T1250?
Cura, PrusaSlicer and OrcaSlicer all work with the Tractus3D T1250, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Tractus3D T1250?
Yes, but OrcaSlicer has no built-in profile for the Tractus3D T1250 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Tractus3D T1250 print?
Tractus3D lists PLA, PETG, ABS & ASA, TPU & flexibles, Nylon (PA) and Polycarbonate (PC) for the T1250.
Does the Tractus3D T1250 work with OctoPrint or Klipper?
Not that we know of, but you don't need either: SimplyPrint connects to the Tractus3D T1250 via Duet (RepRapFirmware).
What is the Tractus3D T1250's bed size and build volume?
The Tractus3D T1250 has a 350 x 350 mm print bed and prints up to 600 mm tall, a build volume of about 350 x 350 x 600 mm. See the full specifications table above for bed type, temperatures and more.
When did the Tractus3D T1250 come out?
Tractus3D launched the T1250 in 2018.
Can the Tractus3D T1250 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.