Does the Sovol SV08 Max 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Sovol SV08 Max: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes
AI failure detection
Yes
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
No1
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsNo1
Works
Depends
Not supported
SimplyPrint doesn't support this through this connection yet.
Sovol SV08 Max owners on SimplyPrint
10+ printers use SimplyPrint
What slicer to use for the Sovol SV08 Max
Use OrcaSlicer or ElegooSlicer: each has a ready-made profile for the Sovol SV08 Max.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Sovol SV08 Max.
Cloud-Based Slicer for Sovol SV08 Max: Use OrcaSlicer Online
Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Sovol SV08 Max models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Sovol SV08 Max: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Sovol SV08 Max
Sovol doesn't make an app for the Sovol SV08 Max. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Sovol SV08 Max in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
CoreXY printers push their prints off
The Sovol SV08 Max's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Sovol SV08 Max specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
500 x 500 x 500 mm
Bed type
Square
Bed size
500 x 500 mm
Max print height
500 mm
Printing
Enclosure
Open frame
Motion system
CoreXY
Max print speed
700 mm/s
Max extruder temperature
300 °C
Has heated bed
Yes
Max bed temperature
100 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
USB, Wi-Fi, Ethernet
Built-in camera
Yes
Supports serial printing
No
Shipped firmware
Klipper
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Sovol
Printer model name
SV08 Max
Made by a company from
China
Launched
May 2025
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Sovol SV08 Max print?
Filament compatibility for the Sovol SV08 Max: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
With care
The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Sovol SV08 Max
Filaments the Sovol SV08 Max prints well, Sovol's own first, then the best known.
The biggest CoreXY the site has reviewed: vanilla Klipper, an auxiliary feeder and fast eddy-current bed leveling, with good quality, but it needs an experienced hand to tune. The optional enclosure opens up engineering filaments. Cons: software and firmware quirks, a rattling enclosure, loud, and very large.
“It’s a niche machine, but it fills that niche extremely well.”
Frankly Built · May 14, 2026
Calls it a big printer for big prints: no better 500 mm cube machine at around $1,000, but not a first printer. A clog and a UI that failed to feed filament cost him a print. He rates it about 4/5, or 3.5/5 going by a friend's heavier use, and keeps it.
Aurora Tech · June 24, 2025
Sovol sent the printer and sponsored the video (disclosed). Tests the open 500 mm CoreXY: well built, the fastest large printer he has tested, with decent quality, though less polished than an H2D or Prusa CORE One. Cons: firmware, UI and slicer-profile bugs, only 8 GB eMMC, a standard-size spool holder, and loud fans.
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Sovol SV08 Max, and how open Sovol leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Sovol is a Chinese 3D printer maker founded in 2018 that sells low-cost printers and publishes their designs. Its SV08 is a lower-cost derivative of the open-source Voron 2.4, released with its structure, electronics and firmware files, and most current models run Klipper. Its buyers are mainly hobbyists who like to tinker.
Sovol is among the most open brands: its printers are standard Klipper machines on open designs, with published files and no cloud. The trade-off is less hand-holding: Tom's Hardware found its larger printer needs experience to tune.
Firmware and custom firmware ●●●●●
Sovol publishes firmware source on GitHub; for the SV08 under GPL-3.0 together with structure files and motherboard designs. Newer repositories, such as the SV08 Max, carry no licence file. Sovol says damage caused by modified or third-party firmware voids its one-year warranty and that it does not help with modifying the source.
[1][2][3]
Local control and integrations ●●●●●
The SV08 family runs Klipper with the Mainsail interface on the local network, so other software can use Moonraker's documented API. Tom's Hardware drove the SV08 from Mainsail, listed 'doesn't require the cloud', and found 'vanilla Klipper' on the SV08 Max. We found no Sovol cloud service or account requirement.
[5][4][1][11]
Third-party filament, slicers and parts ●●●●●
Built on open designs and Klipper, so any filament can be used; Sovol supplies OrcaSlicer profiles, and Tom's Hardware notes the SV08 also works with Cura or PrusaSlicer using Voron settings and takes Bambu-style nozzles. Hotends and extruders are Sovol parts, sold in its store.
[6][1][7]
Repairs and spare parts ●●●●●
Sovol's store sells parts per model (hotends, extruders, fans, eMMC modules, heated beds), and the SV08's full CAD and motherboard files are public, so parts can be identified or made.
[7][1]
Community and documentation ●●●●●
Strong overlap with the Voron community, which Sovol supports with a donation programme, public GitHub repositories and a wiki; Sovol does not give technical help for modifying the source.
[8][1][9]
Pros
Standard Klipper with Mainsail on the local network, no account or cloud.
SV08 structure, electronics and firmware files are published.
Spare parts sold per model, and open designs make parts easy to source.
Low prices for Voron-style machines.
Cons
Damage caused by modified or third-party firmware voids the one-year warranty.
Sovol does not help with modifying its source code.
Tom's Hardware found the SV08's default slicer profiles very conservative and says the SV08 Max needs an experienced hand to tune.
Newer repositories (SV08 Max, Zero) have no licence file.
Track record
July 2026: Sovol launched the M1D, an open-source IDEX printer with a tool changer, on Kickstarter, where it passed $2.8 million in pledges.
[10]
March 2024: Sovol released the SV08, a lower-cost derivative of the Voron 2.4, and published its structure, hardware and firmware files on GitHub under GPL-3.0. Sovol says it set up a donation programme with the Voron Design team.
[1][8]
Researched from 11 sources, last checked October 18, 2026. Show sources
Is the Sovol SV08 Max compatible with SimplyPrint?
Yes. You can connect the Sovol SV08 Max to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Sovol SV08 Max to SimplyPrint?
Follow our step-by-step setup guide for the Sovol SV08 Max. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Sovol SV08 Max?
We recommend OrcaSlicer for the Sovol SV08 Max. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Sovol SV08 Max kept up to date automatically.
Can I use OrcaSlicer with the Sovol SV08 Max?
Yes. OrcaSlicer comes with a profile for the Sovol SV08 Max, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the Sovol SV08 Max print?
Based on its specs (hotend up to 300C, heated bed up to 100C), the Sovol SV08 Max handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Sovol SV08 Max work with OctoPrint or Klipper?
The Sovol SV08 Max works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Sovol SV08 Max's bed size and build volume?
The Sovol SV08 Max has a 500 x 500 mm print bed and prints up to 500 mm tall, a build volume of about 500 x 500 x 500 mm. See the full specifications table above for bed type, temperatures and more.
When did the Sovol SV08 Max come out?
Sovol launched the SV08 Max in May 2025.
Can the Sovol SV08 Max eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the Sovol SV08 Max?
From Sovol's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
Klipper (Moonraker) 
PrusaSlicer
BambuStudio
CrealityPrint
Cura
Kiri:Moto
/product_photo_md.png?cacheid=6924cc4d28d34)
