A four-colour bed slinger that feeds four filaments into one nozzle, sold here with Creality's CFS Lite. It suits hobbyists who print a lot of multicolour PLA and want tool-changer speed and low waste at a bed slinger's price.
This means it shares many characteristics with the base model but may have specific modifications, additional features, or bundled accessories.
Connect the Creality SPARKX i8 Combo to SimplyPrint
Does the Creality SPARKX i8 Combo 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
SimplyPrint Client
Expected to work
Creality's i8 is the SPARKX i7 with the new QuarTeks printhead, and the i7 works with the SimplyPrint Client. Not confirmed on the i8 yet.
The SPARKX i7 runs Klipper under Creality OS, with Moonraker and Fluidd once rooted. The i8 is built on the same platform, but that isn't confirmed for the i8 yet.
Connected through SimplyPrint Client, SimplyPrint is expected to support most of what it offers on the Creality SPARKX i8 Combo: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. Not available through SimplyPrint Client: baby stepping and Z-Offset Calibration. The table below compares the two ways of connecting it to SimplyPrint.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
SimplyPrint Client
Expected to work
Klipper (Moonraker)
Expected to work
Monitoring
Live status and progress
Yes
Yes
Webcam
Yes
Yes
AI failure detection
Yes
Yes
Time left
Yes
Yes
Layer progress
Yes
Yes
Temperatures
Yes
Yes
Printing
Starting a print
Yes
Yes
Pause, resume and cancel
Yes
Yes
Skip objects
Yes
Yes
Files
Print sliced 3MF files
Yes
No
Printer control
Change temperatures
Yes
Yes
Moving with the controls
Yes
Yes
Homing
Yes
Yes
Extrude and retract
Yes
Yes
Change print speed
Yes
Yes
Fan speed
Yes
Yes
Baby stepping
No
Yes
Send G-code
Yes
Yes
Calibration
Change filament
Yes
Yes
Bed leveling
Yes
Yes
Z-Offset Calibration
No
Yes
Multi-material
Map filament to multi-material slots
Yes
No
Sync loaded filament from the multi-material unit
Yes
No
Automation
AutoPrint
Pro
Yes
Yes
Download the file before the print starts
Yes
No1
Connected to SimplyPrint through SimplyPrint Client
Expected to work
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Files
Print sliced 3MF filesYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingNo
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationNo
Multi-material
Map filament to multi-material slotsYes
Sync loaded filament from the multi-material unitYes
Automation
AutoPrint ProYes
Download the file before the print startsYes
Connected to SimplyPrint through Klipper (Moonraker)
Expected to work
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Files
Print sliced 3MF filesNo
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Multi-material
Map filament to multi-material slotsNo
Sync loaded filament from the multi-material unitNo
Automation
AutoPrint ProYes
Download the file before the print startsNo1
Works
Depends
Not supported
SimplyPrint doesn't support this through this connection yet.
What slicer to use for the Creality SPARKX i8 Combo
Creality printers use CrealityPrint, Creality's own slicer. There's no ready-made profile for the Creality SPARKX i8 Combo in our cloud yet.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Creality SPARKX i8 Combo.
Cloud-Based Slicer for Creality SPARKX i8 Combo: Use CrealityPrint Online
Use CrealityPrint and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Creality SPARKX i8 Combo models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Creality SPARKX i8 Combo: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Creality SPARKX i8 Combo
Use SimplyPrint as the app for your Creality SPARKX i8 Combo: watch and run it from your phone or any browser, slice in the cloud, and keep it next to your other printers. It's free to start. Creality's own app is Creality Cloud.
There's no plate swapper or auto-ejection kit for the Creality SPARKX i8 Combo in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Bed slingers are the easiest to automate
The Creality SPARKX i8 Combo moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead.
Creality SPARKX i8 Combo specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
260 x 260 x 255 mm
Bed type
Square
Bed size
260 x 260 mm
Max print height
255 mm
Printing
Enclosure
Open frame
Motion system
Bed slinger
Max print speed
500 mm/s
Max extruder temperature
300 °C
Has heated bed
Yes
Max bed temperature
100 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Ships with multi-material
Creality CFS Lite
Multi-material units it works with
Creality CFS Lite
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
Wi-Fi, SD card
Built-in camera
Yes
Prints from
microSD card
Supports serial printing
Unknown
Shipped firmware
Unknown
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Creality
Printer model name
SPARKX i8 Combo
Made by a company from
China
Launched
September 21, 2026
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Creality SPARKX i8 Combo print?
Filament compatibility for the Creality SPARKX i8 Combo: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
With care
The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Creality SPARKX i8 Combo
Filaments the Creality SPARKX i8 Combo prints well, Creality's own first, then the best known.
What reviewers say about the Creality SPARKX i8 Combo
Reviews from people who test printers for a living. We link to them; the opinions are theirs.
Aurora Tech · September 18, 2026
Hands-on test of a beta unit Creality supplied and sponsored. Colour changes took 1-2 seconds with only the prime tower as waste, and multicolour prints ran 2.5 to 4 times faster than on other multicolour bed slingers. Single-colour quality was only decent, it prints PLA and PETG only, and the beta firmware had bugs (nozzle reading about 10 C high, dropped connections).
When to choose the Creality SPARKX i8 Combo
Choose it when most of your prints are multicolour PLA or PETG and you want the CFS Lite's filament recognition and sealed storage from day one. The plain SPARKX i8 costs less if you are happy with the four spool holders. Pick the SPARKX i7 if you also print TPU or mostly one colour, or a tool changer such as the Snapmaker U1 if you need materials with different temperatures in one print.
Pros
Four colours through one nozzle, with colour changes in 1-2 seconds and almost no purge waste.
Aurora Tech measured multicolour prints 2.5 to 4 times faster than on other multicolour bed slingers, close to tool changers.
Costs far less than a tool changer, and has a 260 x 260 x 255 mm bed and a 500 mm/s top speed.
Arrives 90% pre-assembled. The CFS Lite in the Combo adds RFID filament recognition, automatic loading and unloading, and sealed filament storage.
Expected to work with SimplyPrint like the SPARKX i7, through the SimplyPrint Client or Klipper (not yet tested by us).
Four spool holders on the frame still work if you skip the CFS Lite.
Cons
PLA and PETG only: no TPU, and no mixing filaments that print at very different temperatures, because they share one heat break.
Early units had rough firmware and slicer profiles (false alarms, dropped connections, a PETG profile that needed tuning), so expect updates after launch.
Not shipping yet: it is sold through a crowdfunding campaign, with Creality aiming for deliveries from October and mostly November 2026.
Open frame with a moving bed and no enclosure, and four colours is the maximum.
Single-colour prints were only decent in Aurora Tech's test, with some stringing.
Who it suits
SchoolsCan work
Multicolour prints are a good hook for students, but the open frame and moving bed offer no enclosure and the firmware is still young.
HobbyistsGreat fit
Fast, low-waste multicolour printing is what this printer is built for, as long as you stay with PLA and PETG.
BusinessesCan work
Useful for multicolour PLA products, but it is a new design on early firmware, limited to PLA and PETG, and not shipping yet.
Print farmsNot a good fit
One nozzle, an open frame, no plate swapping and early firmware make it a weak fit for unattended batches.
Compare the Creality SPARKX i8 Combo with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Creality SPARKX i8 Combo, and how open Creality leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mostly open (3.6 of 5)
Mostly open
Walled gardenOpen
Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.
Founded:
2014 ·
Headquarters:
Shenzhen, China ·
Ownership:
Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive ·
Website:www.creality.com
Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.
Firmware and custom firmware ●●●●●
Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access.
[1][2][3][4][5]
Local control and integrations ●●●●●
Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app.
[6][20][7][21][4][8][22]
Third-party filament, slicers and parts ●●●●●
Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs.
[10][11][12]
Repairs and spare parts ●●●●●
Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends).
[12][13][14]
Data and privacy ●●●●●
Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored.
[15][6]
Community and documentation ●●●●●
One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum.
[16][10][6]
Pros
Klipper-based models can be run entirely on the local network through Fluidd, without an account.
Firmware for most current models and the Creality Print slicer are published as source on GitHub.
Wide range, from budget Ender printers to multi-colour K2 machines.
Spare-part kits and model-specific replacement guides are easy to find.
Very large user base, so community help is easy to find.
Cons
Firmware source has usually appeared months after a model ships.
Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
The privacy policy says little about printer and cloud data.
The SPARKX line is built around the Creality Cloud app and an account.
Track record
May 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024.
[16][5]
November 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide.
[4][17][3]
September 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0.
[2][18]
August 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions.
[1][3][5]
Researched from 22 sources, last checked October 18, 2026. Show sources
Is the Creality SPARKX i8 Combo compatible with SimplyPrint?
Most likely. We expect the Creality SPARKX i8 Combo to connect to SimplyPrint via SimplyPrint Client or Klipper (Moonraker), but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.
How do I connect the Creality SPARKX i8 Combo to SimplyPrint?
Follow our step-by-step setup guide for the Creality SPARKX i8 Combo. It shows how to connect it via SimplyPrint Client or Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Creality SPARKX i8 Combo?
Use CrealityPrint, Creality's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the Creality SPARKX i8 Combo in it yet.
Can I use OrcaSlicer with the Creality SPARKX i8 Combo?
Yes, but OrcaSlicer has no built-in profile for the Creality SPARKX i8 Combo that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Creality SPARKX i8 Combo print?
Based on its specs (hotend up to 300C, heated bed up to 100C), the Creality SPARKX i8 Combo handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Creality SPARKX i8 Combo work with OctoPrint or Klipper?
The Creality SPARKX i8 Combo works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Creality SPARKX i8 Combo's bed size and build volume?
The Creality SPARKX i8 Combo has a 260 x 260 mm print bed and prints up to 255 mm tall, a build volume of about 260 x 260 x 255 mm. See the full specifications table above for bed type, temperatures and more.
When did the Creality SPARKX i8 Combo come out?
Creality launched the SPARKX i8 Combo on September 21, 2026.
Can the Creality SPARKX i8 Combo eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
SimplyPrint Client 
Klipper (Moonraker) 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
Cura
Kiri:Moto
