Skip to main content

Mixware Hyper-S: specs, SimplyPrint compatibility and setup

By Mixware, China Launched October 2021

Mixware Hyper-S image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

In use with SimplyPrint

Connects with: OctoPrint
Set it up Compare Buy from Mixware

Mixware Hyper-S at a glance

The Mixware Hyper-S is a 3D printer by Mixware with a 300 x 300 x 400 mm build volume.

Build volume
300 x 300 x 400 mm
Enclosure
Open frame
Max print speed
250 mm/s
Motion system
Bed slinger
Prints well
PLA, PETG
Connectivity
USB
All specifications

Connect the Mixware Hyper-S to SimplyPrint

Does the Mixware Hyper-S 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint supports everything the Mixware Hyper-S lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

Mixware Hyper-S owners on SimplyPrint

In use with SimplyPrint

What slicer to use for the Mixware Hyper-S

Use Cura: it has a ready-made profile for the Mixware Hyper-S.

Ready-made profile for the Mixware Hyper-S

  • Cura
    Runs in the SimplyPrint cloud

No profile for the Mixware Hyper-S

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Mixware Hyper-S.

Cloud-Based Slicer for Mixware Hyper-S: Use Cura Online

Use Cura and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Mixware Hyper-S models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Mixware Hyper-S: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Mixware Hyper-S

SimplyPrint works as the Mixware Hyper-S's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Mixware Hyper-S to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Mixware Hyper-S

There's no plate swapper or auto-ejection kit for the Mixware Hyper-S in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Bed slingers are the easiest to automate

The Mixware Hyper-S moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead.

For example: JobOx · swapmod

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Mixware Hyper-S specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 300 x 300 x 400 mm
Bed type Square
Bed size 300 x 300 mm
Max print height 400 mm

Printing

Enclosure Open frame
Motion system Bed slinger
Max print speed 250 mm/s
Max extruder temperature 260 °C
Has heated bed Yes
Max bed temperature 105 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Connecting

Connectivity USB
Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Mixware
Printer model name Hyper-S
Made by a company from China
Launched October 2021

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Mixware Hyper-S print?

Filament compatibility for the Mixware Hyper-S: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Mixware Hyper-S

Filaments the Mixware Hyper-S prints well, Mixware's own first, then the best known.

Find filament for the Mixware Hyper-S All 3D printer filaments

Compare the Mixware Hyper-S with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Mixware Hyper-S with other printers All Mixware printers

Where to buy the Mixware Hyper-S

Mixware Official store

Best for USA: Mixware's global store

Bought straight from Mixware, from the shop that serves where you are.

$599.00 Price at Mixware, checked October 29, 2026
Buy from Mixware

Frequently asked questions

Is the Mixware Hyper-S compatible with SimplyPrint?

Yes. You can connect the Mixware Hyper-S to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Mixware Hyper-S to SimplyPrint?

Follow our step-by-step setup guide for the Mixware Hyper-S. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Mixware Hyper-S?

We recommend Cura for the Mixware Hyper-S. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Mixware Hyper-S kept up to date automatically.

Can I use OrcaSlicer with the Mixware Hyper-S?

Yes, but OrcaSlicer has no built-in profile for the Mixware Hyper-S that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Mixware Hyper-S print?

Based on its specs (hotend up to 260C, heated bed up to 105C), the Mixware Hyper-S handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Mixware Hyper-S work with OctoPrint or Klipper?

The Mixware Hyper-S works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Mixware Hyper-S's bed size and build volume?

The Mixware Hyper-S has a 300 x 300 mm print bed and prints up to 400 mm tall, a build volume of about 300 x 300 x 400 mm. See the full specifications table above for bed type, temperatures and more.

When did the Mixware Hyper-S come out?

Mixware launched the Hyper-S in October 2021.

Can the Mixware Hyper-S eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

Where can I buy the Mixware Hyper-S?

From Mixware's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.