The Ender-3 V4 is Creality's next Ender: an open-frame bedslinger with a 220 x 220 x 235 mm volume, Creality OS based on Klipper, speeds up to 500 mm/s and CFS support for up to 16 colours. It is for hobbyists who want a quiet, easy printer they can also tinker with, and the Combo adds the CFS.
Does the Creality Ender-3 V4 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Klipper (Moonraker)
Compatible
Creality OS (Klipper) with Fluidd UI supported and root access, per Creality's page, so Moonraker is there. Creality doesn't say whether Fluidd needs root first.
Source
What you need: Nothing extra: the printer runs Klipper as it ships
Ships Klipper; its USB is internal, so OctoPrint runs only on top of Klipper.
Source
Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through SimplyPrint Client, SimplyPrint is expected to support most of what it offers on the Creality Ender-3 V4: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. Not available through SimplyPrint Client: baby stepping and Z-Offset Calibration. The table below compares the two ways of connecting it to SimplyPrint.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
SimplyPrint Client
Expected to work
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Yes
Webcam
Yes
Yes
AI failure detection
Yes
Yes
Time left
Yes
Yes
Layer progress
Yes
Yes
Temperatures
Yes
Yes
Printing
Starting a print
Yes
Yes
Pause, resume and cancel
Yes
Yes
Skip objects
Yes
Yes
Files
Print sliced 3MF files
Yes
No
Printer control
Change temperatures
Yes
Yes
Moving with the controls
Yes
Yes
Homing
Yes
Yes
Extrude and retract
Yes
Yes
Change print speed
Yes
Yes
Fan speed
Yes
Yes
Baby stepping
No
Yes
Send G-code
Yes
Yes
Calibration
Change filament
Yes
Yes
Bed leveling
Yes
Yes
Z-Offset Calibration
No
Yes
Multi-material
Map filament to multi-material slots
Yes1
No
Sync loaded filament from the multi-material unit
Yes1
No
Automation
AutoPrint
Pro
Yes
Yes
Download the file before the print starts
Yes
No2
Connected to SimplyPrint through SimplyPrint Client
Expected to work
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Files
Print sliced 3MF filesYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingNo
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationNo
Multi-material
Map filament to multi-material slotsYes1
Sync loaded filament from the multi-material unitYes1
Automation
AutoPrint ProYes
Download the file before the print startsYes
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Files
Print sliced 3MF filesNo
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Multi-material
Map filament to multi-material slotsNo
Sync loaded filament from the multi-material unitNo
Automation
AutoPrint ProYes
Download the file before the print startsNo2
Works
Depends
Not supported
Needs a multi-material unit
SimplyPrint doesn't support this through this connection yet.
What slicer to use for the Creality Ender-3 V4
Creality printers use CrealityPrint, Creality's own slicer. There's no ready-made profile for the Creality Ender-3 V4 in our cloud yet.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Creality Ender-3 V4.
Cloud-Based Slicer for Creality Ender-3 V4: Use CrealityPrint Online
Use CrealityPrint and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Creality Ender-3 V4 models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Creality Ender-3 V4: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Creality Ender-3 V4
SimplyPrint works as the Creality Ender-3 V4's app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Creality Ender-3 V4 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Bed slingers are the easiest to automate
The Creality Ender-3 V4 moves its bed back and forth, so its plate comes out to the front of the printer. That's what plate swappers like these use: they take the finished plate off and slide a fresh one on. Without a kit, a G-code routine can push cooled prints off with the toolhead.
Creality Ender-3 V4 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
220 x 220 x 235 mm
Bed type
Square
Bed size
220 x 220 mm
Max print height
235 mm
Printing
Enclosure
Open frame
Motion system
Bed slinger
Max print speed
500 mm/s
Max extruder temperature
300 °C
Has heated bed
Yes
Max bed temperature
100 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Multi-material units it works with
Creality CFS
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
Wi-Fi, USB
Built-in camera
Yes
Prints from
USB stick
Supports serial printing
No
Shipped firmware
Klipper
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Creality
Printer model name
Ender-3 V4
Made by a company from
China
Launched
November 2025
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Creality Ender-3 V4 print?
Filament compatibility for the Creality Ender-3 V4: the materials Creality lists for it.
Filament
Suitability
Notes
PLA
Great
On the maker's list of materials for this printer.
PETG
Great
On the maker's list of materials for this printer.
TPU & flexibles
Great
On the maker's list of materials for this printer.
ABS & ASA
Great
On the maker's list of materials for this printer.
Nylon (PA)
Great
On the maker's list of materials for this printer.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
Great
On the maker's list of materials for this printer.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Creality Ender-3 V4
Filaments the Creality Ender-3 V4 prints well, Creality's own first, then the best known.
Choose the Ender-3 V4 for a modern Ender that you can open up: Creality's page says Creality OS supports root access, an expert mode and Fluidd. It is new and we found no independent review. It is open and tops out at 300 degrees C, so it suits PLA, PETG and TPU best; for a closed chamber and engineering filaments choose an enclosed printer such as the Creality K2 or Bambu Lab P2S. For a cheaper start, the Ender-3 V3 Neo has the same plate size.
Pros
Creality OS with Klipper roots, root access, an expert mode and Fluidd support (Creality).
Quiet at about 47 dB in Quiet Mode, with linear rails and a sound-absorbing chassis (Creality).
Full-auto calibration with auto Z-offset, auto levelling and input shaping, and a magnetic quick-swap nozzle cover (Creality).
Up to 500 mm/s and 12,000 mm/s2, with up to 300 degrees C and a 100 degrees C bed (Creality).
Connects to up to four CFS units for 16 colours, with auto filament relay and tangle detection (Creality, CFS sold separately).
Works with SimplyPrint through Klipper, compatible.
Cons
Open frame with no enclosure: Creality lists ABS, ASA and nylon-CF, but without a chamber they are hard to print well.
A small 220 x 220 x 235 mm volume.
The CFS is sold separately unless you buy the Combo (Creality).
New and without an independent review, so the speed claims are Creality's own.
Who it suits
SchoolsCan work
Quiet, easy to set up and compatible with SimplyPrint, so student prints can be queued for approval, but the frame is open.
HobbyistsGreat fit
Quiet, modern, hackable and expandable to many colours at a modest price.
BusinessesCan work
Fine for PLA and PETG prototypes with a Klipper route, but small, open and unproven.
Print farmsCan work
Klipper gives remote control, but the plate is small, there is no enclosure and no plate-clearing kit in our sources.
Compare the Creality Ender-3 V4 with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Creality Ender-3 V4, and how open Creality leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mostly open (3.6 of 5)
Mostly open
Walled gardenOpen
Creality is a Shenzhen 3D printer maker founded in 2014. Its low-cost Ender series, launched in 2017, made desktop 3D printing affordable for many hobbyists. It now sells Klipper-based K-series CoreXY printers, Ender and CR open-frame printers, the Hi and SPARKX beginner lines, the CFS multi-material system, 3D scanners and laser engravers, and runs the Creality Cloud model platform. It listed on the Hong Kong Stock Exchange in 2026.
Founded:
2014 ·
Headquarters:
Shenzhen, China ·
Ownership:
Listed on the Hong Kong Stock Exchange (3388.HK) since 2026; founder Jack Chen is chief executive ·
Website:www.creality.com
Creality sits in the middle: its Klipper-based printers can be run locally with Fluidd and open slicers, and it publishes firmware source, but usually months after launch, and it dropped root access on its 2025 K1 revisions.
Firmware and custom firmware ●●●●●
Creality publishes Klipper firmware source for the K1, K2, Hi and Ender-3 V3 KE on GitHub under GPL, but after launch: the K1 source came about three months after the series launched in May 2023, the K2 and Hi sources in September 2025. Earlier K1 printers have an official root option with a published guide, but Creality's wiki says the 2025 K1C and K1 Max do not support root access.
[1][2][3][4][5]
Local control and integrations ●●●●●
Creality Print sends jobs over the local network with no account, and Creality Cloud is optional. The K2 series and Ender-3 V3 serve Fluidd on the printer, so other software can use Klipper's documented Moonraker API. On the K1 series, Creality's firmware notes treat Fluidd and Mainsail as add-ons owners install themselves, and Creality says the 2025 K1C and K1 Max do not support root access. The SPARKX i7 is set up through the Creality Cloud app.
[6][20][7][21][4][8][22]
Third-party filament, slicers and parts ●●●●●
Third-party filament works; Creality Print is an open-source (AGPL-3.0) slicer and OrcaSlicer supports Creality printers. Creality sells nozzle, hotend and extruder kits per model; newer K2 parts such as its nozzle kit are Creality designs.
[10][11][12]
Repairs and spare parts ●●●●●
Creality's store sells extruder, hotend, heating-block and print-head kits per model, and its wiki has parts lists and replacement guides for current printers (for example the K2 Plus and SPARKX i7 hotends).
[12][13][14]
Data and privacy ●●●●●
Local printing needs no account; Creality Cloud and its app need one. Creality's published privacy policy is written for its websites and services, allows use of data for targeted advertising, and says little about printer data or where it is stored.
[15][6]
Community and documentation ●●●●●
One of the largest user bases (second in consumer 3D printers by 2025 sales value, per figures in its listing), a public wiki with model-specific guides, firmware and slicer sources on GitHub, and an official forum.
[16][10][6]
Pros
Klipper-based models can be run entirely on the local network through Fluidd, without an account.
Firmware for most current models and the Creality Print slicer are published as source on GitHub.
Wide range, from budget Ender printers to multi-colour K2 machines.
Spare-part kits and model-specific replacement guides are easy to find.
Very large user base, so community help is easy to find.
Cons
Firmware source has usually appeared months after a model ships.
Root access, offered on earlier K1 printers, is not supported on the 2025 K1C and K1 Max.
The privacy policy says little about printer and cloud data.
The SPARKX line is built around the Creality Cloud app and an account.
Track record
May 2026: Creality listed on the Main Board of the Hong Kong Stock Exchange (3388.HK), raising about HK$1.27 billion net. Its prospectus showed 2025 revenue of RMB 3.13 billion and a net loss of RMB 182.4 million, after a profit in 2024.
[16][5]
November 2025: Creality's wiki states that the 2025 revisions of the K1C and K1 Max do not support root access, which earlier K1 printers offered through an official option and guide.
[4][17][3]
September 2025: Creality published the Klipper source for its K2 series and for the Hi on GitHub under GPL-3.0.
[2][18]
August 2023: About three months after the K1 series launched, Creality published its K1 Klipper source on GitHub, followed by a repository with a root guide and Fluidd and Mainsail install instructions.
[1][3][5]
Researched from 22 sources, last checked October 18, 2026. Show sources
Is the Creality Ender-3 V4 compatible with SimplyPrint?
Yes. You can connect the Creality Ender-3 V4 to SimplyPrint via Klipper (Moonraker) or SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Creality Ender-3 V4 to SimplyPrint?
Follow our step-by-step setup guide for the Creality Ender-3 V4. It shows how to connect it via Klipper (Moonraker) or SimplyPrint Client, what you need for each, and which to pick.
What slicer should I use for the Creality Ender-3 V4?
Use CrealityPrint, Creality's own slicer, made for its printers. You can run it in SimplyPrint's online slicer; there's no ready-made profile for the Creality Ender-3 V4 in it yet.
Can I use OrcaSlicer with the Creality Ender-3 V4?
Yes, but OrcaSlicer has no built-in profile for the Creality Ender-3 V4 that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Creality Ender-3 V4 print?
Creality lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Carbon-fiber & glass-filled for the Ender-3 V4.
Does the Creality Ender-3 V4 work with OctoPrint or Klipper?
The Creality Ender-3 V4 works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Creality Ender-3 V4's bed size and build volume?
The Creality Ender-3 V4 has a 220 x 220 mm print bed and prints up to 235 mm tall, a build volume of about 220 x 220 x 235 mm. See the full specifications table above for bed type, temperatures and more.
When did the Creality Ender-3 V4 come out?
Creality launched the Ender-3 V4 in November 2025.
Can the Creality Ender-3 V4 eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
Klipper (Moonraker) 
SimplyPrint Client 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
Cura
Kiri:Moto
