Does the Tronxy D01 Plus 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Ships Marlin-based firmware; Klipper only after you install it.
Source
Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through OctoPrint, SimplyPrint is expected to support everything the Tronxy D01 Plus lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
OctoPrint
Expected to work
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Depends2
Files
Print binary G-code (.bgcode)
Depends3
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
Depends4
Connected to SimplyPrint through OctoPrint
Expected to work
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsDepends2
Files
Print binary G-code (.bgcode)Depends3
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Automation
AutoPrint ProYes
Download the file before the print startsDepends4
Works
Depends
Not supported
Needs a camera
Requires the OctoPrint plugin Cancel Objects
Requires the OctoPrint plugin BGCode
Requires version 4.2.0 or newer of the SimplyPrint plugin
What slicer to use for the Tronxy D01 Plus
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Tronxy D01 Plus, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Tronxy D01 Plus.
Cloud-Based Slicer for Tronxy D01 Plus
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Tronxy D01 Plus models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Tronxy D01 Plus: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Tronxy D01 Plus
Tronxy doesn't make an app for the Tronxy D01 Plus. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Tronxy D01 Plus in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
CoreXY printers push their prints off
The Tronxy D01 Plus's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Tronxy D01 Plus specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
330 x 330 x 400 mm
Bed type
Square
Bed size
330 x 330 mm
Max print height
400 mm
Printing
Motion system
CoreXY
Max print speed
150 mm/s
Max extruder temperature
275 °C
Has heated bed
Yes
Max bed temperature
100 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
USB, SD card
Prints from
microSD card
Supports serial printing
Unknown
Shipped firmware
Marlin
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
The printer
Printer manufacturer / brand
Tronxy
Printer model name
D01 Plus
Made by a company from
China
Launched
April 2021
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Tronxy D01 Plus print?
Filament compatibility for the Tronxy D01 Plus: the materials Tronxy lists for it.
Filament
Suitability
Notes
PLA
Great
On the maker's list of materials for this printer.
PETG
Great
On the maker's list of materials for this printer.
TPU & flexibles
Great
On the maker's list of materials for this printer.
ABS & ASA
Great
On the maker's list of materials for this printer.
Nylon (PA)
With care
Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC)
With care
On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Tronxy D01 Plus
Filaments the Tronxy D01 Plus prints well, Tronxy's own first, then the best known.
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Tronxy D01 Plus, and how open Tronxy leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (4.3 of 5)
Open
Walled gardenOpen
Tronxy (Shenzhen Tronxy Technology Co., Ltd) is a Shenzhen 3D printer maker whose founder built the company's first printer in 2013. It sells low- and mid-priced FDM printers, from the X5SA and XY-3 series up to the very large VEHO line (1,000 mm and more), plus Moore clay printers, through its own store, Amazon, eBay, AliExpress, Alibaba and dealers. Buyers are hobbyists, schools and small businesses that want a large build volume for little money.
Mostly open: Marlin source on GitHub, Klipper on the newer large printers, open filament and no cloud. Documentation is thin, and firmware downloads go through an email request.
Firmware and custom firmware ●●●●●
Tronxy publishes Marlin source for its STM32/GD32 boards on GitHub (tronxy3d) under GPL-3.0, covering nearly 30 X5SA, XY, D01 and VEHO 500-800 variants, last updated February 2024. Its newer VEHO PRO and A series ship with Klipper, and it sells a Klipper upgrade kit for the X5SA.
[8][9][6][7]
Local control and integrations ●●●●●
We found no Tronxy cloud service or account. The Klipper VEHO PRO prints from a USB flash drive or over a USB data cable, Wi-Fi or Ethernet, all on your own premises, and Tronxy publishes the Marlin source for its X5SA and XY printers, which host software such as OctoPrint drives over USB.
[7][9][11]
Third-party filament, slicers and parts ●●●●●
Open filament (1.75 mm, with 2.85 mm print heads for the VEHO) and standard G-code, which any slicer produces. VEHO hotends and print heads such as the Ext06 are Tronxy's own parts.
[6][7]
Repairs and spare parts ●●●●●
Tronxy's store sells model-specific mainboards, hotends, nozzles and extruder kits for current and older lines (X5SA, XY, VEHO), including Klipper-version parts.
[6]
Community and documentation ●●●●●
Firmware source and build steps are on GitHub, and upstream Klipper ships configs for eight Tronxy models. Tronxy's own download page asks owners to email for the right firmware instead of offering it directly.
[4][8][10]
Pros
Very large build volumes for the price, up to 1,000 mm and more in the VEHO line.
Marlin source is public on GitHub, and the newer VEHO models run open-source Klipper.
No cloud or account: print over USB, memory card, Wi-Fi or Ethernet.
Spare mainboards, hotends and nozzles sold for current and older models.
Cons
Firmware on Tronxy's website is by email request rather than a direct download.
Dozens of models and variants with similar names (the published firmware alone covers nearly 30), so check carefully which firmware and parts fit.
VEHO hotends and print heads are Tronxy-specific parts.
Track record
October 2022: Tronxy began publishing Marlin source for its STM32F446/GD32-based boards on GitHub (tronxy3d) under GPL-3.0; it updated it until February 2024.
[8][9]
December 2020: Tronxy launched the XY-3 SE on Kickstarter; the company says shipping finished in April 2021.
[2]
Researched from 11 sources, last checked October 18, 2026. Show sources
Is the Tronxy D01 Plus compatible with SimplyPrint?
Most likely. We expect the Tronxy D01 Plus to connect to SimplyPrint via OctoPrint, but nobody has confirmed it yet. If you have one, the setup guide shows within minutes whether it works, and your answer confirms it for everyone.
How do I connect the Tronxy D01 Plus to SimplyPrint?
Follow our step-by-step setup guide for the Tronxy D01 Plus. It shows how to connect it via OctoPrint, what you need for each, and which to pick.
What slicer should I use for the Tronxy D01 Plus?
Cura, PrusaSlicer and OrcaSlicer all work with the Tronxy D01 Plus, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Tronxy D01 Plus?
Yes, but OrcaSlicer has no built-in profile for the Tronxy D01 Plus that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Tronxy D01 Plus print?
Tronxy lists PLA, ABS & ASA, PETG and TPU & flexibles for the D01 Plus.
Does the Tronxy D01 Plus work with OctoPrint or Klipper?
The Tronxy D01 Plus works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Tronxy D01 Plus's bed size and build volume?
The Tronxy D01 Plus has a 330 x 330 mm print bed and prints up to 400 mm tall, a build volume of about 330 x 330 x 400 mm. See the full specifications table above for bed type, temperatures and more.
When did the Tronxy D01 Plus come out?
Tronxy launched the D01 Plus in April 2021.
Can the Tronxy D01 Plus eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the Tronxy D01 Plus?
From Tronxy's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
OctoPrint 
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:Moto
