Hong Kong
Peopoly Magneto X at a glance
The Peopoly Magneto X is a 3D printer by Peopoly with a 400 x 300 x 300 mm build volume.
- Build volume
- 400 x 300 x 300 mm
- Enclosure
- Open frame
- Max print speed
- 800 mm/s
- Motion system
- Other kinematics
- Prints well
- PLA, PETG
- Built-in camera
- Yes
- Connectivity
- Wi-Fi, Ethernet
Connect the Peopoly Magneto X to SimplyPrint
Does the Peopoly Magneto X 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Compatible
What you need: Nothing extra: the printer runs Klipper as it ships
In use with SimplyPrint
-
OctoPrint
Directly, over USB
Not compatible
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Peopoly Magneto X: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes |
| AI failure detection | Yes |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 1 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes
- AI failure detection Yes
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 1
Works Depends Not supported
- SimplyPrint doesn't support this through this connection yet.
Peopoly Magneto X owners on SimplyPrint
In use with SimplyPrint
What slicer to use for the Peopoly Magneto X
Use OrcaSlicer, ElegooSlicer, or CrealityPrint: each has a ready-made profile for the Peopoly Magneto X.
Ready-made profile for the Peopoly Magneto X
-
OrcaSlicerRuns in the SimplyPrint cloud -
ElegooSlicerRuns in the SimplyPrint cloud -
CrealityPrintRuns in the SimplyPrint cloud
No profile for the Peopoly Magneto X
PrusaSlicer
BambuStudio
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Peopoly Magneto X.
Cloud-Based Slicer for Peopoly Magneto X: Use OrcaSlicer Online
Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Peopoly Magneto X models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Peopoly Magneto X: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Peopoly Magneto X
Peopoly doesn't make an app for the Peopoly Magneto X. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Peopoly Magneto X
There's no plate swapper or auto-ejection kit for the Peopoly Magneto X in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Peopoly Magneto X specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 400 x 300 x 300 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 400 x 300 mm |
| Max print height | 300 mm |
Printing
| Enclosure | Open frame |
|---|---|
| Motion system | Other kinematics |
| Max print speed | 800 mm/s |
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 130 °C |
| Number of nozzles | 1 |
| Toolheads | 1 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Wi-Fi, Ethernet |
|---|---|
| Built-in camera | Yes |
| Supports serial printing | No |
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Peopoly |
|---|---|
| Printer model name | Magneto X |
| Made by a company from | Hong Kong |
| Launched | September 2023 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Peopoly Magneto X print?
Filament compatibility for the Peopoly Magneto X: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | With care | Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Peopoly Magneto X
Filaments the Peopoly Magneto X prints well, Peopoly's own first, then the best known.
What reviewers say about the Peopoly Magneto X
Reviews from people who test printers for a living. We link to them; the opinions are theirs.
Long review after tuning and fitting updated parts, on a unit Peopoly provided free for review. Prints fast and looks good once profiles are tuned, with Klipper and a Klipper screen, a good camera and an easy-to-work-on frame. But it is not yet a just-works printer: it needs tuning and slicer profiles are still being improved. Suits tinkerers.
Early look at the first-generation printer with closed-loop linear motors instead of belts and steppers. The motion system works reliably under full Klipper, but prints show extrusion-control problems, a ripple on flat surfaces and acceleration well below the promised 22,000 mm/s2. Calls it a promising tech demo that needs tuning.
Compare the Peopoly Magneto X with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Sovol SV08
350 x 350 x 345 mmLaunched March 2024Connects with: Klipper (Moonraker)Similar build volumeCompatible Compare side by side Sovol SV08 -
Prusa XL
360 x 360 x 360 mmLaunched March 13, 2023Connects with: SimplyPrint Client, OctoPrint, Prusa direct firmwareSimilar build volumeCompatible Compare side by side Prusa XL -
Sovol SV06 Plus
300 x 300 x 340 mmLaunched 2023Connects with: OctoPrintSimilar build volumeCompatible Compare side by side Sovol SV06 Plus -
Creality Ender-3 V3 Plus
300 x 300 x 330 mmLaunched April 2024Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume
Where to buy the Peopoly Magneto X
Official store
Best for USA: Peopoly's global store
Bought straight from Peopoly, from the shop that serves where you are.
Frequently asked questions
Is the Peopoly Magneto X compatible with SimplyPrint?
Yes. You can connect the Peopoly Magneto X to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Peopoly Magneto X to SimplyPrint?
Follow our step-by-step setup guide for the Peopoly Magneto X. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Peopoly Magneto X?
We recommend OrcaSlicer for the Peopoly Magneto X. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Peopoly Magneto X kept up to date automatically.
Can I use OrcaSlicer with the Peopoly Magneto X?
Yes. OrcaSlicer comes with a profile for the Peopoly Magneto X, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the Peopoly Magneto X print?
Based on its specs (hotend up to 300C, heated bed up to 130C), the Peopoly Magneto X handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Peopoly Magneto X work with OctoPrint or Klipper?
The Peopoly Magneto X works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Peopoly Magneto X's bed size and build volume?
The Peopoly Magneto X has a 400 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 400 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.
When did the Peopoly Magneto X come out?
Peopoly launched the Magneto X in September 2023.
Can the Peopoly Magneto X eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the Peopoly Magneto X?
From Peopoly's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.