USA
Jubilee Jubilee at a glance
The Jubilee Jubilee is a 3D printer by Jubilee with a 300 x 300 x 300 mm build volume.
- Build volume
- 300 x 300 x 300 mm
- Enclosure
- Open frame
- Motion system
- CoreXY
- Prints well
- PLA, PETG, TPU & flexibles
- Connectivity
- Wi-Fi, Ethernet
Connect the Jubilee Jubilee to SimplyPrint
Does the Jubilee Jubilee 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Duet (RepRapFirmware)
Compatible
Designed around a Duet board running RepRapFirmware; the project ships Duet config files. Source
What you need: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client
-
OctoPrint
Directly, over USB
Not confirmed yet - help us find out
Duet/RRF is driven from Duet Web Control; no documented OctoPrint use. Source
Help us confirm Be one of the first to confirm it -
Klipper (Moonraker)
Not compatible
Stock design is Duet/RRF; community Klipper configs exist (Duet 2 + Duex5). Source
- Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification
What works with SimplyPrint
Connected through Duet (RepRapFirmware), SimplyPrint supports everything the Jubilee Jubilee lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Duet (RepRapFirmware) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | Yes |
Connected to SimplyPrint through Duet (RepRapFirmware)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts Yes
Works Depends Not supported
- Needs a camera
What slicer to use for the Jubilee Jubilee
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Jubilee Jubilee, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the Jubilee Jubilee
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Jubilee Jubilee.
Cloud-Based Slicer for Jubilee Jubilee
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Jubilee Jubilee models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Jubilee Jubilee: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Jubilee Jubilee
SimplyPrint works as the Jubilee Jubilee's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Jubilee Jubilee
There's no plate swapper or auto-ejection kit for the Jubilee Jubilee in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
The Jubilee Jubilee's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.
Ways to automate it
- Push prints off with the toolhead On a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Jubilee Jubilee specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 300 x 300 x 300 mm |
|---|---|
| Bed type | Square |
| Bed size | 300 x 300 mm |
| Max print height | 300 mm |
Printing
| Enclosure | Open frame |
|---|---|
| Motion system | CoreXY |
| Max extruder temperature | 300 °C |
| Has heated bed | Yes |
| Max bed temperature | 130 °C |
| Number of nozzles | 1 |
| Toolheads | 4 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | Yes |
|---|---|
| IDEX (independent dual extruders) | No |
Connecting
| Connectivity | Wi-Fi, Ethernet |
|---|---|
| Supports serial printing | Unknown |
| Shipped firmware | RepRapFirmware (Duet) |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Jubilee |
|---|---|
| Printer model name | Jubilee |
| Made by a company from | USA |
| Launched | October 2019 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Jubilee Jubilee print?
Filament compatibility for the Jubilee Jubilee: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | With care | The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints. |
| Nylon (PA) | With care | Possible with care - an enclosure and very dry filament are essential. |
| Polycarbonate (PC) | With care | On the edge - PC really wants an enclosed, hot chamber to avoid warping. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Jubilee Jubilee
Filaments the Jubilee Jubilee prints well, Jubilee's own first, then the best known.
Compare the Jubilee Jubilee with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
FLSUN Super Racer
260 x 260 x 330 mmLaunched 2021Connects with: OctoPrintSimilar build volumeCompatible Compare side by side FLSUN Super Racer -
Sovol SV04
300 x 300 x 400 mmLaunched 2021Connects with: OctoPrintSimilar build volumeCompatible Compare side by side Sovol SV04 -
Creality Ender 7
250 x 250 x 300 mmLaunched June 24, 2021Connects with: OctoPrintSimilar build volumeCompatible Compare side by side Creality Ender 7 -
Longer LK 5 Pro
300 x 300 x 400 mmLaunched 2021Connects with: OctoPrintSimilar build volumeCompatible Compare side by side Longer LK 5 Pro
Frequently asked questions
Is the Jubilee Jubilee compatible with SimplyPrint?
Yes. You can connect the Jubilee Jubilee to SimplyPrint via Duet (RepRapFirmware), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Jubilee Jubilee to SimplyPrint?
Follow our step-by-step setup guide for the Jubilee Jubilee. It shows how to connect it via Duet (RepRapFirmware), what you need for each, and which to pick.
What slicer should I use for the Jubilee Jubilee?
Cura, PrusaSlicer and OrcaSlicer all work with the Jubilee Jubilee, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Jubilee Jubilee?
Yes, but OrcaSlicer has no built-in profile for the Jubilee Jubilee that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Jubilee Jubilee print?
Based on its specs (hotend up to 300C, heated bed up to 130C), the Jubilee Jubilee handles PLA, PETG, or TPU & flexibles well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Jubilee Jubilee work with OctoPrint or Klipper?
Not that we know of, but you don't need either: SimplyPrint connects to the Jubilee Jubilee via Duet (RepRapFirmware).
What is the Jubilee Jubilee's bed size and build volume?
The Jubilee Jubilee has a 300 x 300 mm print bed and prints up to 300 mm tall, a build volume of about 300 x 300 x 300 mm. See the full specifications table above for bed type, temperatures and more.
When did the Jubilee Jubilee come out?
Jubilee launched the Jubilee in October 2019.
Can the Jubilee Jubilee eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.