Hong Kong
Elyarchi Alcheman at a glance
The Elyarchi Alcheman is a 3D printer by Elyarchi with a 300 x 290 x 280 mm build volume.
- Build volume
- 300 x 290 x 280 mm
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
Connect the Elyarchi Alcheman to SimplyPrint
Does the Elyarchi Alcheman 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Compatible
Ships Klipper with a Mainsail-style web UI (the manual edits crowsnest.conf and adds cameras through it, and connects OrcaSlicer by IP); Elyarchi is upstreaming its config to Klipper. Source
What you need: Nothing extra: the printer runs Klipper as it ships
-
OctoPrint
Directly, over USB
Not compatible
Ships Klipper; OctoPrint only on top of it. Source
- Ships with Klipper: OctoPrint only runs on top of it, through the OctoKlipper plugin
What works with SimplyPrint
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Elyarchi Alcheman: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
| Connected to SimplyPrint through | |
|---|---|
| SimplyPrint feature | Klipper (Moonraker) Compatible |
| Monitoring | |
| Live status and progress | Yes |
| Webcam | Yes 1 |
| AI failure detection | Yes 1 |
| Time left | Yes |
| Layer progress | Yes |
| Temperatures | Yes |
| Printing | |
| Starting a print | Yes |
| Pause, resume and cancel | Yes |
| Skip objects | Yes |
| Printer control | |
| Change temperatures | Yes |
| Moving with the controls | Yes |
| Homing | Yes |
| Extrude and retract | Yes |
| Change print speed | Yes |
| Fan speed | Yes |
| Baby stepping | Yes |
| Send G-code | Yes |
| Calibration | |
| Change filament | Yes |
| Bed leveling | Yes |
| Z-Offset Calibration | Yes |
| Automation | |
| AutoPrint Pro | Yes |
| Download the file before the print starts | No 2 |
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
- Live status and progress Yes
- Webcam Yes 1
- AI failure detection Yes 1
- Time left Yes
- Layer progress Yes
- Temperatures Yes
Printing
- Starting a print Yes
- Pause, resume and cancel Yes
- Skip objects Yes
Printer control
- Change temperatures Yes
- Moving with the controls Yes
- Homing Yes
- Extrude and retract Yes
- Change print speed Yes
- Fan speed Yes
- Baby stepping Yes
- Send G-code Yes
Calibration
- Change filament Yes
- Bed leveling Yes
- Z-Offset Calibration Yes
Automation
- AutoPrint Pro Yes
- Download the file before the print starts No 2
Works Depends Not supported
- Needs a camera
- SimplyPrint doesn't support this through this connection yet.
What slicer to use for the Elyarchi Alcheman
None of the slicers in SimplyPrint's cloud has a ready-made profile for the Elyarchi Alcheman, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.
No profile for the Elyarchi Alcheman
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Elyarchi Alcheman.
Cloud-Based Slicer for Elyarchi Alcheman
All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Elyarchi Alcheman models from any device, anywhere in the world!
Try Online Slicer NowProfiles and other slicers
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Elyarchi Alcheman: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Elyarchi Alcheman
SimplyPrint works as the Elyarchi Alcheman's app: on your phone and in any browser, with a slicer in the cloud.
What you get with SimplyPrint
- An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
- More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
- Printers from many brands in one place, side by side.
- A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Automate the Elyarchi Alcheman
There's no plate swapper or auto-ejection kit for the Elyarchi Alcheman in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Ways to automate it
- Your own ejection G-code Write the routine that clears your plate, and AutoPrint runs it after every print.
- A robot arm, or anything with an API Tell SimplyPrint the plate is clear through the API or a webhook, from a robot arm or your own system.
- Clear it by hand, keep the queue AutoPrint waits for you to mark the plate clear, then starts the next job.
AutoPrint comes with the Pro plan and up.
Elyarchi Alcheman specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Size
| Build volume | 300 x 290 x 280 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 300 x 290 mm |
| Max print height | 280 mm |
Printing
| Max extruder temperature | 450 °C |
|---|---|
| Has heated bed | Yes |
| Max bed temperature | 130 °C |
| Heated chamber | Up to 90 °C |
| Number of nozzles | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Connecting
| Supports serial printing | Unknown |
|---|---|
| Shipped firmware | Klipper |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Elyarchi |
|---|---|
| Printer model name | Alcheman |
| Made by a company from | Hong Kong |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Elyarchi Alcheman print?
Filament compatibility for the Elyarchi Alcheman: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required. |
| PETG | Great | Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed). |
| TPU & flexibles | Great | The direct-drive extruder feeds flexible filament well. Print slowly for clean results. |
| ABS & ASA | Great | The high-temperature hotend and hot bed handle ABS and ASA well. An enclosure helps further on large parts. |
| Nylon (PA) | Good | Doable with care - dry the filament thoroughly, and an enclosure helps a lot. |
| Polycarbonate (PC) | Good | In range for PC. Dry the filament, print slowly, and use an enclosure for the best results. |
| Carbon-fiber & glass-filled | With care | Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Compare the Elyarchi Alcheman with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
-
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Bambu Lab P1S -
Bambu Lab P2S Combo
256 x 256 x 256 mmLaunched October 14, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Bambu Lab P2S Combo -
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side Creality K1 Max -
ELEGOO Centauri Carbon
256 x 256 x 256 mmLaunched February 17, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible Compare side by side ELEGOO Centauri Carbon
Where to buy the Elyarchi Alcheman
Best for USA: Elyarchi's global store
Bought straight from Elyarchi, from the shop that serves where you are.
Frequently asked questions
Is the Elyarchi Alcheman compatible with SimplyPrint?
Yes. You can connect the Elyarchi Alcheman to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Elyarchi Alcheman to SimplyPrint?
Follow our step-by-step setup guide for the Elyarchi Alcheman. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Elyarchi Alcheman?
Cura, PrusaSlicer and OrcaSlicer all work with the Elyarchi Alcheman, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.
Can I use OrcaSlicer with the Elyarchi Alcheman?
Yes, but OrcaSlicer has no built-in profile for the Elyarchi Alcheman that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.
What filament can the Elyarchi Alcheman print?
Based on its specs (hotend up to 450C, heated bed up to 130C), the Elyarchi Alcheman handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Elyarchi Alcheman work with OctoPrint or Klipper?
The Elyarchi Alcheman works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Elyarchi Alcheman's bed size and build volume?
The Elyarchi Alcheman has a 300 x 290 mm print bed and prints up to 280 mm tall, a build volume of about 300 x 290 x 280 mm. See the full specifications table above for bed type, temperatures and more.
Can the Elyarchi Alcheman eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.
Where can I buy the Elyarchi Alcheman?
From Elyarchi's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.