The Creator 5 Pro is the enclosed version of Flashforge's four-toolhead tool changer: a 256 mm build cube, 320 °C hotends, an actively heated chamber up to 65 °C and HEPA plus carbon filtration. It is for makers and small businesses that want low-waste multi-colour and multi-material printing including ABS, ASA, nylon and PC.
Connect the Flashforge Creator 5 Pro to SimplyPrint
Does the Flashforge Creator 5 Pro 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
SimplyPrint Client
Compatible
What you need: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client
Connected through SimplyPrint Client, SimplyPrint covers the core of what it offers on the Flashforge Creator 5 Pro: the camera and AI failure detection, remote printing, filament mapping for its multi-material unit and AutoPrint. Not available through SimplyPrint Client: skip objects, moving with the controls, homing, extrude and retract, change print speed, fan speed, baby stepping, send G-code, change filament, bed leveling and Z-Offset Calibration.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
SimplyPrint Client
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes
AI failure detection
Yes
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
No
Print start options
Yes
Files
Print sliced 3MF files
Yes
Printer control
Change temperatures
Yes
Moving with the controls
No
Homing
No
Extrude and retract
No
Change print speed
No
Fan speed
No
Baby stepping
No
Send G-code
No
Calibration
Change filament
No
Bed leveling
No
Z-Offset Calibration
No
Multi-material
Map filament to multi-material slots
Yes1
Sync loaded filament from the multi-material unit
Yes1
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
Yes
Connected to SimplyPrint through SimplyPrint Client
Compatible
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsNo
Print start optionsYes
Files
Print sliced 3MF filesYes
Printer control
Change temperaturesYes
Moving with the controlsNo
HomingNo
Extrude and retractNo
Change print speedNo
Fan speedNo
Baby steppingNo
Send G-codeNo
Calibration
Change filamentNo
Bed levelingNo
Z-Offset CalibrationNo
Multi-material
Map filament to multi-material slotsYes1
Sync loaded filament from the multi-material unitYes1
Automation
AutoPrint ProYes
Download the file before the print startsYes
Works
Depends
Not supported
Needs a multi-material unit
Flashforge Creator 5 Pro owners on SimplyPrint
25+ printers use SimplyPrint
What slicer to use for the Flashforge Creator 5 Pro
Use OrcaSlicer or ElegooSlicer: each has a ready-made profile for the Flashforge Creator 5 Pro.
Ready-made profile for the Flashforge Creator 5 Pro
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Flashforge Creator 5 Pro.
Cloud-Based Slicer for Flashforge Creator 5 Pro: Use OrcaSlicer Online
Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Flashforge Creator 5 Pro models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Flashforge Creator 5 Pro: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Flashforge Creator 5 Pro
Use SimplyPrint as the app for your Flashforge Creator 5 Pro: watch and run it from your phone or any browser, slice in the cloud, and keep it next to your other printers. It's free to start. Flashforge's own app is Flash Studio.
There's no plate swapper or auto-ejection kit for the Flashforge Creator 5 Pro in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Enclosed printers push their prints out
The Flashforge Creator 5 Pro's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Flashforge Creator 5 Pro specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
256 x 256 x 256 mm
Bed type
Square
Bed size
256 x 256 mm
Max print height
256 mm
Printing
Enclosure
Fully enclosed
Motion system
CoreXY
Max print speed
300 mm/s
Max extruder temperature
320 °C
Has heated bed
Yes
Max bed temperature
120 °C
Heated chamber
Up to 65 °C
Number of nozzles
4
Toolheads
4
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Toolchanger or hotend changer
Yes
IDEX (independent dual extruders)
No
Connecting
Connectivity
Wi-Fi, USB
Built-in camera
Yes
Prints from
USB stick
Supports serial printing
No
Shipped firmware
The maker's own
Shipped local UI
Custom
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
Slicer profile name(s)
Flashforge Creator 5 Pro, Creator 5 Pro
Has start options
Yes
Available options: Bed Leveling, Flow Calibration, Timelapse
The printer
Printer manufacturer / brand
Flashforge
Printer model name
Creator 5 Pro
Made by a company from
China
Launched
May 2026
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Flashforge Creator 5 Pro print?
Filament compatibility for the Flashforge Creator 5 Pro: the materials Flashforge lists for it.
Filament
Suitability
Notes
PLA
Great
On the maker's list of materials for this printer.
PETG
Great
On the maker's list of materials for this printer.
TPU & flexibles
Great
On the maker's list of materials for this printer.
ABS & ASA
Great
On the maker's list of materials for this printer.
Nylon (PA)
Great
On the maker's list of materials for this printer.
Polycarbonate (PC)
Great
On the maker's list of materials for this printer.
Carbon-fiber & glass-filled
Great
On the maker's list of materials for this printer.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Flashforge Creator 5 Pro
Filaments the Flashforge Creator 5 Pro prints well, Flashforge's own first, then the best known.
Finds print quality top-tier across tool changes, and cut a four-colour Benchy's waste from 36 g to 8 g by tuning the prime tower. Cons: only four filaments, long print preparation, high default priming waste, manual filament handling, no nozzle cleaning or official dryer, and purging into the build chamber. Suggests weighing whether a dedicated tool changer is needed.
“The Flashforge Creator 5 Pro is a very good 3D printer—especially, though not exclusively, for complex multi-color or multi-material projects.”
ModBot · July 25, 2026
Tests both the open Creator 5 and the enclosed Creator 5 Pro with many materials and grew more impressed over time. Nitpicks: buzzing LEDs, a small screen, a heat soak that cannot be skipped and slow per-tool filament loading. Advises the Pro for ABS and ASA and the cheaper Creator 5 for multicolor PLA-type printing.
When to choose the Flashforge Creator 5 Pro
Choose the Creator 5 Pro when you want a tool changer and engineering materials in one machine: ModBot advises it over the open Creator 5 for ABS and ASA, and Notebookcheck rates its print quality top-tier across tool changes. If you only print PLA-type colours, the cheaper Creator 5 does the same job. For engineering materials in one or two colours, an enclosed single-toolhead printer such as the Qidi Plus5 or Bambu Lab H2S avoids the long print preparation and manual per-tool filament handling Notebookcheck noted; it suggests weighing whether you need a dedicated tool changer at all.
Pros
Four toolheads keep waste low: Notebookcheck cut a four-colour Benchy's waste from 36 g to 8 g by tuning the prime tower.
Enclosed with active chamber heating to 65 °C, an H13 HEPA and carbon filter, and door-open detection (Flashforge).
A wide material range: ABS, ASA, PC, nylon, TPU, PETG and carbon-filled PLA (Flashforge), and ModBot found it handled many materials.
Built-in camera, and it works with SimplyPrint through the SimplyPrint Client.
Cons
Only four filaments, long print preparation and high default priming waste that purges into the build chamber (Notebookcheck).
Filament is handled by hand for each toolhead, with no nozzle cleaning or official dryer (Notebookcheck); ModBot found per-tool loading slow.
A heat soak that can't be skipped, buzzing LEDs and a small screen (ModBot).
New in 2026, so it has a short track record.
Who it suits
SchoolsCan work
Enclosed, filtered and with door detection, and SimplyPrint can hold student prints for approval, but four toolheads loaded by hand and long print preparation ask a lot of a classroom.
HobbyistsGood fit
Low-waste multi-colour plus ABS and ASA in one machine, at a higher price than the open Creator 5.
BusinessesGood fit
A heated, filtered chamber and four materials per print suit functional multi-material parts, though the long preparation slows short jobs.
Print farmsCan work
Capable per machine, but manual per-tool filament handling, the mandatory heat soak and its newness weigh on unattended fleets.
Compare the Flashforge Creator 5 Pro with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Flashforge Creator 5 Pro, and how open Flashforge leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mixed (3.0 of 5)
Mixed
Walled gardenOpen
Flashforge (Zhejiang Flashforge 3D Technology) is a Chinese 3D printer maker founded in 2011. It sells the Adventurer 5M and 5M Pro CoreXY printers, the AD5X multi-colour printer and the Creator series, plus resin and wax printers, to customers ranging from hobbyists to businesses.
Founded:
2011 ·
Headquarters:
Zhejiang, China ·
Ownership:
Zhejiang Flashforge 3D Technology Co., Ltd. ·
Website:www.flashforge.com
Flashforge is mixed: the Adventurer 5M runs Klipper with published source and works in a LAN mode with open slicers, but the stock system is closed to modification and its app relies on the cloud.
Firmware and custom firmware ●●●●●
The Adventurer 5M series runs Klipper, and Flashforge published its Klipper source on GitHub under GPL-3.0 in January 2024. The stock system is not built to be modified: the community 'Klipper Mod', which adds Moonraker, Mainsail and Fluidd, is unofficial and warns that it may cost the warranty.
[1][2]
Local control and integrations ●●●●●
A LAN mode lets Orca-Flashforge send jobs on the local network, and USB printing works offline. The Flash Maker app needs internet and a Flashforge account and does not connect in LAN mode. Flashforge documents no local API for other software. Moonraker with Mainsail or Fluidd comes only with the community Klipper Mod, which is unofficial and warns that it may cost the warranty.
[3][4][2]
Third-party filament, slicers and parts ●●●●●
Third-party filament works; Orca-Flashforge is an open-source OrcaSlicer fork and OrcaSlicer itself supports Flashforge printers. Nozzles are sold as complete printer-specific assemblies.
[5][6][7]
Repairs and spare parts ●●●●●
Flashforge sells nozzle, extruder, filament-feeding and touchscreen assemblies for the Adventurer 5M, and its wiki has replacement guides, for example the AD5X extruder board.
[7][8]
Community and documentation ●●●●●
A wiki with manuals, FAQs and maintenance guides, and slicer and Klipper sources on GitHub; much of the advanced use comes from the community mod.
[3][1][2]
Pros
Long-established maker, founded in 2011.
LAN mode and USB printing work without the cloud.
Klipper source and an open-source slicer are published.
Common replacement assemblies are sold for the Adventurer 5M.
Cons
Stock firmware is not meant to be modified; deeper control needs an unofficial community mod.
The Flash Maker app needs internet and an account, and does not work in LAN mode.
Nozzles are sold as complete printer-specific assemblies.
Track record
January 2024: Flashforge published the Klipper source for the Adventurer 5M and 5M Pro on GitHub under GPL-3.0.
[1]
Researched from 10 sources, last checked October 18, 2026. Show sources
Is the Flashforge Creator 5 Pro compatible with SimplyPrint?
Yes. You can connect the Flashforge Creator 5 Pro to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Flashforge Creator 5 Pro to SimplyPrint?
Follow our step-by-step setup guide for the Flashforge Creator 5 Pro. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick.
What slicer should I use for the Flashforge Creator 5 Pro?
We recommend OrcaSlicer for the Flashforge Creator 5 Pro. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Flashforge Creator 5 Pro kept up to date automatically.
Can I use OrcaSlicer with the Flashforge Creator 5 Pro?
Yes. OrcaSlicer comes with a profile for the Flashforge Creator 5 Pro, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the Flashforge Creator 5 Pro print?
Flashforge lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the Creator 5 Pro.
Does the Flashforge Creator 5 Pro work with OctoPrint or Klipper?
Not that we know of, but you don't need either: SimplyPrint connects to the Flashforge Creator 5 Pro via SimplyPrint Client.
What is the Flashforge Creator 5 Pro's bed size and build volume?
The Flashforge Creator 5 Pro has a 256 x 256 mm print bed and prints up to 256 mm tall, a build volume of about 256 x 256 x 256 mm. See the full specifications table above for bed type, temperatures and more.
When did the Flashforge Creator 5 Pro come out?
Flashforge launched the Creator 5 Pro in May 2026.
Can the Flashforge Creator 5 Pro eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the Flashforge Creator 5 Pro?
From Flashforge's own store, which has shops for Australia, Canada, the EU, the UK and everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
SimplyPrint Client 
PrusaSlicer
BambuStudio
CrealityPrint
Cura
Kiri:Moto
Flashforge for Australia
Flashforge for Canada
Flashforge for the EU
Flashforge for the UK