Project R3D Talos 600 IDEX: specs, SimplyPrint compatibility and setup

By Project R3D, USA Launched October 30, 2023

Project R3D Talos 600 IDEX image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

Connects with: OctoPrint
Set it up Compare Buy from Project R3D

Project R3D Talos 600 IDEX at a glance

The Project R3D Talos 600 IDEX is a 3D printer by Project R3D with a 600 x 600 x 600 mm build volume.

Build volume
600 x 600 x 600 mm
Enclosure
Open frame
Prints well
PLA, PETG
Connectivity
Wi-Fi, Ethernet
All specifications

Connect the Project R3D Talos 600 IDEX to SimplyPrint

Does the Project R3D Talos 600 IDEX 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint supports everything the Project R3D Talos 600 IDEX lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

What slicer to use for the Project R3D Talos 600 IDEX

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Project R3D Talos 600 IDEX, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Project R3D Talos 600 IDEX

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Project R3D Talos 600 IDEX.

Cloud-Based Slicer for Project R3D Talos 600 IDEX

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Project R3D Talos 600 IDEX models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Project R3D Talos 600 IDEX: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Project R3D Talos 600 IDEX

Project R3D doesn't make an app for the Project R3D Talos 600 IDEX. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Project R3D Talos 600 IDEX to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Project R3D Talos 600 IDEX

There's no plate swapper or auto-ejection kit for the Project R3D Talos 600 IDEX in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Project R3D Talos 600 IDEX specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 600 x 600 x 600 mm
Bed type Square
Bed size 600 x 600 mm
Max print height 600 mm

Printing

Enclosure Open frame
Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 150 °C
Number of nozzles 1
Toolheads 2
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) Yes

Connecting

Connectivity Wi-Fi, Ethernet
Supports serial printing Yes
Shipped firmware RepRapFirmware (Duet)

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Project R3D
Printer model name Talos 600 IDEX
Made by a company from USA
Launched October 30, 2023
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Project R3D Talos 600 IDEX print?

Filament compatibility for the Project R3D Talos 600 IDEX: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Project R3D Talos 600 IDEX

Filaments the Project R3D Talos 600 IDEX prints well, Project R3D's own first, then the best known.

Find filament for the Project R3D Talos 600 IDEX All 3D printer filaments

Compare the Project R3D Talos 600 IDEX with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Project R3D Talos 600 IDEX with other printers All Project R3D printers

Where to buy the Project R3D Talos 600 IDEX

Project R3D Official store

Best for USA: Project R3D's global store

Bought straight from Project R3D, from the shop that serves where you are.

$4,999.00 Price at Project R3D, checked October 22, 2026
Buy from Project R3D

Frequently asked questions

Is the Project R3D Talos 600 IDEX compatible with SimplyPrint?

Yes. You can connect the Project R3D Talos 600 IDEX to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Project R3D Talos 600 IDEX to SimplyPrint?

Follow our step-by-step setup guide for the Project R3D Talos 600 IDEX. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Project R3D Talos 600 IDEX?

Cura, PrusaSlicer and OrcaSlicer all work with the Project R3D Talos 600 IDEX, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Project R3D Talos 600 IDEX?

Yes, but OrcaSlicer has no built-in profile for the Project R3D Talos 600 IDEX that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Project R3D Talos 600 IDEX print?

Based on its specs (hotend up to 300C, heated bed up to 150C), the Project R3D Talos 600 IDEX handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Project R3D Talos 600 IDEX work with OctoPrint or Klipper?

The Project R3D Talos 600 IDEX works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Project R3D Talos 600 IDEX's bed size and build volume?

The Project R3D Talos 600 IDEX has a 600 x 600 mm print bed and prints up to 600 mm tall, a build volume of about 600 x 600 x 600 mm. See the full specifications table above for bed type, temperatures and more.

When did the Project R3D Talos 600 IDEX come out?

Project R3D launched the Talos 600 IDEX on October 30, 2023.

Can the Project R3D Talos 600 IDEX eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Where can I buy the Project R3D Talos 600 IDEX?

From Project R3D's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.