Vivedino Troodon 2.0 Mini: specs, SimplyPrint compatibility and setup

By Vivedino, China

Vivedino Troodon 2.0 Mini image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

In use with SimplyPrint

Connects with: Klipper (Moonraker)
Set it up Compare Buy from Vivedino

Vivedino Troodon 2.0 Mini at a glance

The Vivedino Troodon 2.0 Mini is a 3D printer by Vivedino with a 250 x 250 x 240 mm build volume.

Build volume
250 x 250 x 240 mm
Motion system
CoreXY
Prints well
PLA, PETG
All specifications

Connect the Vivedino Troodon 2.0 Mini to SimplyPrint

Does the Vivedino Troodon 2.0 Mini 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

What works with SimplyPrint

Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Vivedino Troodon 2.0 Mini: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature Klipper (Moonraker) Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Yes
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts No 2

Connected to SimplyPrint through Klipper (Moonraker)

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Yes

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts No 2

Works Depends Not supported

  1. Needs a camera
  2. SimplyPrint doesn't support this through this connection yet.

Vivedino Troodon 2.0 Mini owners on SimplyPrint

In use with SimplyPrint

What slicer to use for the Vivedino Troodon 2.0 Mini

None of the slicers in SimplyPrint's cloud has a ready-made profile for the Vivedino Troodon 2.0 Mini, but it takes standard G-code: start from a similar printer's profile and set the bed size, height and nozzle to match.

No profile for the Vivedino Troodon 2.0 Mini

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Vivedino Troodon 2.0 Mini.

Cloud-Based Slicer for Vivedino Troodon 2.0 Mini

All supported slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Vivedino Troodon 2.0 Mini models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Vivedino Troodon 2.0 Mini: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Vivedino Troodon 2.0 Mini

SimplyPrint works as the Vivedino Troodon 2.0 Mini's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Vivedino Troodon 2.0 Mini to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Vivedino Troodon 2.0 Mini

There's no plate swapper or auto-ejection kit for the Vivedino Troodon 2.0 Mini in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

CoreXY printers push their prints off

The Vivedino Troodon 2.0 Mini's bed only moves up and down, so the usual way to automate it is a G-code routine that lets the toolhead push the cooled print off the front of the plate before the next job starts.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Vivedino Troodon 2.0 Mini specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 250 x 250 x 240 mm
Bed type Square
Bed size 250 x 250 mm
Max print height 240 mm

Printing

Motion system CoreXY
Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 120 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Connecting

Supports serial printing No
Shipped firmware Klipper

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Vivedino
Printer model name Troodon 2.0 Mini
Made by a company from China

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Vivedino Troodon 2.0 Mini print?

Filament compatibility for the Vivedino Troodon 2.0 Mini: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) With care On the edge - PC really wants an enclosed, hot chamber to avoid warping.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Vivedino Troodon 2.0 Mini

Filaments the Vivedino Troodon 2.0 Mini prints well, Vivedino's own first, then the best known.

Find filament for the Vivedino Troodon 2.0 Mini All 3D printer filaments

Compare the Vivedino Troodon 2.0 Mini with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Vivedino Troodon 2.0 Mini with other printers All Vivedino printers

Where to buy the Vivedino Troodon 2.0 Mini

Vivedino Official store

Best for USA: Vivedino's global store

Bought straight from Vivedino, from the shop that serves where you are.

Out of stock at Vivedino Checked October 23, 2026
Buy from Vivedino

Frequently asked questions

Is the Vivedino Troodon 2.0 Mini compatible with SimplyPrint?

Yes. You can connect the Vivedino Troodon 2.0 Mini to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Vivedino Troodon 2.0 Mini to SimplyPrint?

Follow our step-by-step setup guide for the Vivedino Troodon 2.0 Mini. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.

What slicer should I use for the Vivedino Troodon 2.0 Mini?

Cura, PrusaSlicer and OrcaSlicer all work with the Vivedino Troodon 2.0 Mini, and you can run any of them in SimplyPrint's online browser slicer - no install needed, on any device.

Can I use OrcaSlicer with the Vivedino Troodon 2.0 Mini?

Yes, but OrcaSlicer has no built-in profile for the Vivedino Troodon 2.0 Mini that we know of: start from a similar printer's profile and set the bed size, height and nozzle to match.

What filament can the Vivedino Troodon 2.0 Mini print?

Based on its specs (hotend up to 300C, heated bed up to 120C), the Vivedino Troodon 2.0 Mini handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Vivedino Troodon 2.0 Mini work with OctoPrint or Klipper?

The Vivedino Troodon 2.0 Mini works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Vivedino Troodon 2.0 Mini's bed size and build volume?

The Vivedino Troodon 2.0 Mini has a 250 x 250 mm print bed and prints up to 240 mm tall, a build volume of about 250 x 250 x 240 mm. See the full specifications table above for bed type, temperatures and more.

Can the Vivedino Troodon 2.0 Mini eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.

Where can I buy the Vivedino Troodon 2.0 Mini?

From Vivedino's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.