Does the ELEGOO Centauri Carbon 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
SimplyPrint Client
Compatible
What you need: A computer or Raspberry Pi on the same network that stays on, running the SimplyPrint Client
Connected through SimplyPrint Client, SimplyPrint supports everything the ELEGOO Centauri Carbon lets other software do: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control and AutoPrint. The only exceptions are what the ELEGOO Centauri Carbon doesn't let other software do: baby stepping, send G-code, change filament, bed leveling and Z-Offset Calibration.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
SimplyPrint Client
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes
AI failure detection
Yes
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Print start options
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Not offered by the printer1
Send G-code
Not offered by the printer1
Calibration
Change filament
Not offered by the printer1
Bed leveling
Not offered by the printer1
Z-Offset Calibration
Not offered by the printer1
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
Yes
Connected to SimplyPrint through SimplyPrint Client
Compatible
Monitoring
Live status and progressYes
WebcamYes
AI failure detectionYes
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Print start optionsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingNot offered by the printer1
Send G-codeNot offered by the printer1
Calibration
Change filamentNot offered by the printer1
Bed levelingNot offered by the printer1
Z-Offset CalibrationNot offered by the printer1
Automation
AutoPrint ProYes
Download the file before the print startsYes
Works
Depends
Not supported
Not offered by the printer
The printer doesn't offer this to other software.
ELEGOO Centauri Carbon owners on SimplyPrint
100+ printers use SimplyPrint
SimplyPrint Client
4.0 out of 5
5 verified owners
Ratings come from owners whose printer has finished at least 10 prints with SimplyPrint.
What slicer to use for the ELEGOO Centauri Carbon
Use ElegooSlicer, ELEGOO's own slicer: it has a ready-made profile for the ELEGOO Centauri Carbon. Also with a profile for it: OrcaSlicer, Cura.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the ELEGOO Centauri Carbon.
Cloud-Based Slicer for ELEGOO Centauri Carbon: Use ElegooSlicer Online
Use ElegooSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your ELEGOO Centauri Carbon models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your ELEGOO Centauri Carbon: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the ELEGOO Centauri Carbon
ELEGOO doesn't make an app for the ELEGOO Centauri Carbon. SimplyPrint works as its app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the ELEGOO Centauri Carbon in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Enclosed printers push their prints out
The ELEGOO Centauri Carbon's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
ELEGOO Centauri Carbon specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research.
Read more by the manufacturer
Size
Build volume
256 x 256 x 256 mm
Bed type
Square
Bed size
256 x 256 mm
Max print height
256 mm
Printing
Enclosure
Fully enclosed
Motion system
CoreXY
Max print speed
500 mm/s
Max extruder temperature
320 °C
Has heated bed
Yes
Max bed temperature
110 °C
Number of nozzles
1
Toolheads
1
Direct drive
Yes
Probing tool / Auto Bed Leveling
Yes
Filament width
1.75 mm
Multi-material
Multi-material units it works with
Elegoo Canvas
Toolchanger or hotend changer
No
IDEX (independent dual extruders)
No
Connecting
Connectivity
Wi-Fi, USB
Built-in camera
Yes
Supports serial printing
No
Shipped firmware
The maker's own
Files and slicing
Supported file formats
G-code (.gcode, .gco, .g)
Has start options
Yes
Available options: Bed Leveling, Timelapse
The printer
Printer manufacturer / brand
ELEGOO
Printer model name
Centauri Carbon
Made by a company from
China
Launched
February 17, 2025
Still made
Yes
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the ELEGOO Centauri Carbon print?
Filament compatibility for the ELEGOO Centauri Carbon: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
Great
Enclosed, with a hot enough hotend and bed: ABS and ASA print well.
Nylon (PA)
Good
Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC)
Good
In range for PC. Dry the filament, print slowly, and use an enclosure for the best results.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the ELEGOO Centauri Carbon
Filaments the ELEGOO Centauri Carbon prints well, ELEGOO's own first, then the best known.
Hands-on from a long-time printer owner: simple setup, a sharp Benchy 15 minutes after calibration, and reliable, consistent prints that made it his everyday workhorse. Lists CoreXY at 500 mm/s, enclosure, camera, auto leveling and a 320 C hotend. Calls it a solid buy at $413 and a bargain at $279.
“Based on its performance, the Elegoo Centauri Carbon is a solid buy at its $413 retail price”
180 hours of benchmark and application tests. Measured an average repeatability of 0.025 mm and clean prints in PC-CF and ASA-CF thanks to the enclosure. Drawbacks: the slicer has no job queue and no skip-part feature. Calls it a compelling budget choice for hobbyists and engineers.
“The Centauri Carbon sets a new benchmark in the low-cost desktop FDM 3D printer market.”
Elegoo's first CoreXY at $299.99 runs very well and prints excellently, with a handy side spool holder and front USB port, and a local Klipper Wi-Fi instead of cloud-only control. Cons: weak chamber lighting and no long-term reliability record yet. Editor's Choice.
“The machine could use better lighting, but runs very well and produces excellent prints.”
ModBot · April 19, 2025
A couple of months of testing. Likes the build quality, speed, cooling and full enclosure; dislikes the dark chamber, the proprietary firmware without bed-mesh options, and ABS first-layer and PETG profile problems. Calls it a really good value at $299 for a first CoreXY. VoxelPLA sponsored.
Aurora Tech · February 8, 2025
Sponsored review (Elegoo supplied the unit; disclosed). A well-built enclosed CoreXY that narrows the gap to Bambu. Cons: Z offset sometimes needs manual tweaks, skinned Orca slicer, surface quality behind the best, multicolour system not ready. Good value for single-colour and engineering materials.
Frankly Built · February 5, 2025
Elegoo sent the unit and sponsored the video (disclosed). He expected a clone but is very impressed: output matches his pricier printers, and he sees no reason not to use it for projects. Says it is early days and points viewers to other reviews for long-term hours.
Compare the ELEGOO Centauri Carbon with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the ELEGOO Centauri Carbon, and how open ELEGOO leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Mostly open (3.8 of 5)
Mostly open
Walled gardenOpen
ELEGOO is a Shenzhen company founded in 2015 that makes FDM and resin 3D printers, filament, laser engravers and STEM electronics kits. Its FDM range is the Centauri Carbon, an enclosed CoreXY printer, and the Neptune 4 series of open-frame Klipper printers, sold to hobbyists at budget to mid-range prices. DJI became a shareholder in 2025.
Founded:
2015 ·
Headquarters:
Shenzhen, China ·
Ownership:
Privately held through its parent, Shenzhen Zhinengpai (SmartPie) Technology; DJI became a shareholder in 2025 ·
Website:www.elegoo.com
ELEGOO is fairly open in daily use: its printers work over the LAN with open slicers and any filament, and it now publishes firmware source. Source releases have followed community pressure rather than launch, and spare parts for the newest printers are thin in its store.
Firmware and custom firmware ●●●●●
The Neptune 4 series runs Klipper. For the Centauri Carbon, which went on sale in February 2025, ELEGOO published its modified source on GitHub under GPL-3.0 in September 2025, saying it did so in response to user feedback.
[1][2][3][4]
Local control and integrations ●●●●●
ELEGOO's printers connect to its slicer on the local network by IP without an account. The Neptune 4 series serves Klipper's web interface and Moonraker, which OrcaSlicer reaches as an Octo/Klipper host. For the Centauri Carbon and Centauri Carbon 2, ELEGOO published Elegoo Link on GitHub in January 2026, an Apache-2.0 SDK for local discovery, status, file upload and print control. The Matrix phone app adds remote printing while the printer is online.
[5][4][16][6][17]
Third-party filament, slicers and parts ●●●●●
Third-party filament works; ElegooSlicer is an open-source OrcaSlicer-based slicer, OrcaSlicer works with the Neptune 4, and ELEGOO published the data format of its RFID filament tags so others can use it.
[7][8][4]
Repairs and spare parts ●●●●●
ELEGOO sells hotend, extruder and nozzle kits and some boards for the Neptune 4, and its wiki has many replacement guides, including the Centauri Carbon motherboard. The store's Centauri Carbon parts list is short (hotend kit, touchscreen, upper shell).
[9][10][11]
Data and privacy ●●●●●
LAN printing needs no account; the Matrix app and cloud do. The privacy policy names the companies responsible for personal data in each region (Shenzhen, Hong Kong, United States) but is written mainly for the online store.
[12][5]
Community and documentation ●●●●●
Active community and a wiki with guides per model; firmware and slicer sources are on GitHub, although the Centauri Carbon source came after users asked for it.
[11][7][1]
Pros
Works on the local network with ElegooSlicer or OrcaSlicer, with no account needed.
Open-source slicer and a published RFID tag format for filament.
Many step-by-step replacement guides in its wiki.
Offered owners compensation when the Centauri Carbon multi-colour add-on was delayed.
Cons
Centauri Carbon firmware source came about seven months after sales began, after users asked.
The Centauri Carbon's multi-colour add-on only became available in April 2026, after ELEGOO said in November 2025 it could not give a date.
Few complete Centauri Carbon parts are listed in its store.
The privacy policy is written mainly for the online store.
Track record
May 2026: ELEGOO's parent closed a B+ financing round of over 500 million yuan (about $73 million) from investors including Meituan, Hillhouse Capital and Shenzhen Capital Group. It reported 2025 revenue of 2.3 billion yuan.
[13]
April 27, 2026: CANVAS, the multi-colour system for the Centauri Carbon, became available, five months after ELEGOO said it could not give a release date.
[14]
November 18, 2025: DJI and Hangzhou Jiangyu Technology became shareholders of ELEGOO's parent company, according to a business registration update reported by TechNode. The size of the stake was not disclosed.
[15]
November 2025: ELEGOO said the multi-colour system it was developing for the Centauri Carbon did not yet perform as it wanted and that it could not guarantee a release date. It offered owners a choice of a $50 filament coupon, a 365-day warranty extension or $80 off a Centauri Carbon 2 Combo.
[14]
September 26, 2025: In response to user feedback, ELEGOO published the modified source code of the Centauri series firmware on GitHub under GPL-3.0.
[1][2]
February 2025: ELEGOO opened pre-orders for the Centauri Carbon, its first enclosed CoreXY printer, on 17 February 2025.
[3]
Researched from 17 sources, last checked October 18, 2026. Show sources
Is the ELEGOO Centauri Carbon compatible with SimplyPrint?
Yes. You can connect the ELEGOO Centauri Carbon to SimplyPrint via SimplyPrint Client, then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the ELEGOO Centauri Carbon to SimplyPrint?
Follow our step-by-step setup guide for the ELEGOO Centauri Carbon. It shows how to connect it via SimplyPrint Client, what you need for each, and which to pick.
What slicer should I use for the ELEGOO Centauri Carbon?
We recommend ElegooSlicer for the ELEGOO Centauri Carbon. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the ELEGOO Centauri Carbon kept up to date automatically.
Can I use OrcaSlicer with the ELEGOO Centauri Carbon?
Yes. OrcaSlicer comes with a profile for the ELEGOO Centauri Carbon, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the ELEGOO Centauri Carbon print?
Based on its specs (hotend up to 320C, heated bed up to 110C), the ELEGOO Centauri Carbon handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the ELEGOO Centauri Carbon work with OctoPrint or Klipper?
Not that we know of, but you don't need either: SimplyPrint connects to the ELEGOO Centauri Carbon via SimplyPrint Client.
What is the ELEGOO Centauri Carbon's bed size and build volume?
The ELEGOO Centauri Carbon has a 256 x 256 mm print bed and prints up to 256 mm tall, a build volume of about 256 x 256 x 256 mm. See the full specifications table above for bed type, temperatures and more.
When did the ELEGOO Centauri Carbon come out?
ELEGOO launched the Centauri Carbon on February 17, 2025.
Can the ELEGOO Centauri Carbon eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Where can I buy the ELEGOO Centauri Carbon?
From ELEGOO's own store, which has shops for Australia and everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
China
SimplyPrint Client 
PrusaSlicer
BambuStudio
CrealityPrint
Kiri:Moto
ELEGOO for Australia