Skip to main content

Eryone ER20: specs, SimplyPrint compatibility and setup

By Eryone, China

Eryone ER20 image

Does it work with SimplyPrint?

Compatible We're sure

It's known to work with SimplyPrint, from documentation, the protocol or owners' prints.

In use with SimplyPrint

Connects with: OctoPrint
Set it up Compare

Eryone ER20 at a glance

The Eryone ER20 is a 3D printer by Eryone with a 250 x 220 x 200 mm build volume.

Build volume
250 x 220 x 200 mm
Prints well
PLA, PETG
All specifications

Connect the Eryone ER20 to SimplyPrint

Does the Eryone ER20 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Compatible

    Through OctoPrint

    How to set up SimplyPrint on Eryone ER20
  • OctoPrint

    OctoPrint

    Directly, over USB

    Compatible

    What you need: A Raspberry Pi running OctoPrint, plugged into the printer with a USB cable

    In use with SimplyPrint

    How to set up OctoPrint on Eryone ER20
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    • Doesn't ship with Klipper: it runs Klipper after you install it in place of its own firmware, a modification

What works with SimplyPrint

Connected through OctoPrint, SimplyPrint supports everything the Eryone ER20 lets other software do: the camera and AI failure detection, remote printing, temperature and movement control and AutoPrint. 3 features depend on how it's set up: the table says what each needs.

Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature OctoPrint Compatible
Monitoring
Live status and progress Yes
Webcam Yes 1
AI failure detection Yes 1
Time left Yes
Layer progress Yes
Temperatures Yes
Printing
Starting a print Yes
Pause, resume and cancel Yes
Skip objects Depends 2
Files
Print binary G-code (.bgcode) Depends 3
Printer control
Change temperatures Yes
Moving with the controls Yes
Homing Yes
Extrude and retract Yes
Change print speed Yes
Fan speed Yes
Baby stepping Yes
Send G-code Yes
Calibration
Change filament Yes
Bed leveling Yes
Z-Offset Calibration Yes
Automation
AutoPrint Pro Yes
Download the file before the print starts Depends 4

Connected to SimplyPrint through OctoPrint

Compatible

Monitoring

  • Live status and progress Yes
  • Webcam Yes 1
  • AI failure detection Yes 1
  • Time left Yes
  • Layer progress Yes
  • Temperatures Yes

Printing

  • Starting a print Yes
  • Pause, resume and cancel Yes
  • Skip objects Depends 2

Files

  • Print binary G-code (.bgcode) Depends 3

Printer control

  • Change temperatures Yes
  • Moving with the controls Yes
  • Homing Yes
  • Extrude and retract Yes
  • Change print speed Yes
  • Fan speed Yes
  • Baby stepping Yes
  • Send G-code Yes

Calibration

  • Change filament Yes
  • Bed leveling Yes
  • Z-Offset Calibration Yes

Automation

  • AutoPrint Pro Yes
  • Download the file before the print starts Depends 4

Works Depends Not supported

  1. Needs a camera
  2. Requires the OctoPrint plugin Cancel Objects
  3. Requires the OctoPrint plugin BGCode
  4. Requires version 4.2.0 or newer of the SimplyPrint plugin

Eryone ER20 owners on SimplyPrint

In use with SimplyPrint

What slicer to use for the Eryone ER20

Use OrcaSlicer, ElegooSlicer, or Cura: each has a ready-made profile for the Eryone ER20.

Ready-made profile for the Eryone ER20

No profile for the Eryone ER20

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Eryone ER20.

Cloud-Based Slicer for Eryone ER20: Use OrcaSlicer Online

Use OrcaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Eryone ER20 models from any device, anywhere in the world!

Try Online Slicer Now
Profiles and other slicers

Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.

Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Eryone ER20: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.

The app for the Eryone ER20

SimplyPrint works as the Eryone ER20's app: on your phone and in any browser, with a slicer in the cloud.

What you get with SimplyPrint

  • An app for iPhone and Android, the same in any browser, and a slicer in the cloud.
  • More than monitoring: a print queue, AI failure detection, AutoPrint and accounts for a team.
  • Printers from many brands in one place, side by side.
  • A European cloud: hosted in Frankfurt, Germany, under the GDPR.
Connect the Eryone ER20 to SimplyPrint, free Download SimplyPrint on the App Store Get SimplyPrint on Google Play

Automate the Eryone ER20

There's no plate swapper or auto-ejection kit for the Eryone ER20 in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.

Ways to automate it

How AutoPrint works

AutoPrint comes with the Pro plan and up.

Eryone ER20 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research.

Size

Build volume 250 x 220 x 200 mm
Bed type Rectangle
Bed size 250 x 220 mm
Max print height 200 mm

Printing

Max extruder temperature 250 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 1
Direct drive No
Probing tool / Auto Bed Leveling No
Filament width 1.75 mm

Connecting

Supports serial printing Yes
Shipped firmware Marlin

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Eryone
Printer model name ER20
Made by a company from China

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Eryone ER20 print?

Filament compatibility for the Eryone ER20: the materials it can handle, judged from its hotend, bed, chamber and enclosure.

Filament Suitability Notes
PLA Great The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG Great Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles With care Possible, but a Bowden extruder makes flexibles harder - print slowly and prefer firmer (higher-shore) TPU.
ABS & ASA With care The bed is hot enough, but ABS and ASA warp without an enclosure, which is strongly recommended for clean prints.
Nylon (PA) With care Possible with care - an enclosure and very dry filament are essential.
Polycarbonate (PC) Not ideal Not recommended - PC needs very high hotend temps and an enclosed chamber.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Best filament for the Eryone ER20

Filaments the Eryone ER20 prints well, Eryone's own first, then the best known.

Find filament for the Eryone ER20 All 3D printer filaments

Compare the Eryone ER20 with similar printers

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.

Compare the Eryone ER20 with other printers All Eryone printers

Frequently asked questions

Is the Eryone ER20 compatible with SimplyPrint?

Yes. You can connect the Eryone ER20 to SimplyPrint via OctoPrint, then slice, queue, start and monitor prints from your browser or the mobile app.

How do I connect the Eryone ER20 to SimplyPrint?

Follow our step-by-step setup guide for the Eryone ER20. It shows how to connect it via OctoPrint, what you need for each, and which to pick.

What slicer should I use for the Eryone ER20?

We recommend OrcaSlicer for the Eryone ER20. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Eryone ER20 kept up to date automatically.

Can I use OrcaSlicer with the Eryone ER20?

Yes. OrcaSlicer comes with a profile for the Eryone ER20, and you can run it in SimplyPrint's online slicer, so there's nothing to install.

What filament can the Eryone ER20 print?

Based on its specs (hotend up to 250C, heated bed up to 100C), the Eryone ER20 handles PLA or PETG well. See the full filament guide above for ABS, nylon, PC and composites.

Does the Eryone ER20 work with OctoPrint or Klipper?

The Eryone ER20 works with OctoPrint, and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.

What is the Eryone ER20's bed size and build volume?

The Eryone ER20 has a 250 x 220 mm print bed and prints up to 200 mm tall, a build volume of about 250 x 220 x 200 mm. See the full specifications table above for bed type, temperatures and more.

Can the Eryone ER20 eject prints automatically?

There's no kit for it that we support yet, but SimplyPrint's AutoPrint can run your own ejection G-code, work with a robot arm through the API, or wait for you to clear the plate, and then start the next job from your queue.

Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.