Does the Voron Voron Trident 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd?
Each way of connecting it, what it needs, and how to set it up.
Connected through Klipper (Moonraker), SimplyPrint supports most of what it offers on the Voron Voron Trident: the camera and AI failure detection, remote printing, skipping objects, temperature and movement control, filament mapping for its multi-material unit and AutoPrint. Not yet in SimplyPrint through Klipper (Moonraker): download the file before the print starts.
Every SimplyPrint feature, for each way of connecting it to SimplyPrint
Connected to SimplyPrint through
SimplyPrint feature
Klipper (Moonraker)
Compatible
Monitoring
Live status and progress
Yes
Webcam
Yes1
AI failure detection
Yes1
Time left
Yes
Layer progress
Yes
Temperatures
Yes
Printing
Starting a print
Yes
Pause, resume and cancel
Yes
Skip objects
Yes
Printer control
Change temperatures
Yes
Moving with the controls
Yes
Homing
Yes
Extrude and retract
Yes
Change print speed
Yes
Fan speed
Yes
Baby stepping
Yes
Send G-code
Yes
Calibration
Change filament
Yes
Bed leveling
Yes
Z-Offset Calibration
Yes
Multi-material
Map filament to multi-material slots
Yes2
Automation
AutoPrint
Pro
Yes
Download the file before the print starts
No3
Connected to SimplyPrint through Klipper (Moonraker)
Compatible
Monitoring
Live status and progressYes
WebcamYes1
AI failure detectionYes1
Time leftYes
Layer progressYes
TemperaturesYes
Printing
Starting a printYes
Pause, resume and cancelYes
Skip objectsYes
Printer control
Change temperaturesYes
Moving with the controlsYes
HomingYes
Extrude and retractYes
Change print speedYes
Fan speedYes
Baby steppingYes
Send G-codeYes
Calibration
Change filamentYes
Bed levelingYes
Z-Offset CalibrationYes
Multi-material
Map filament to multi-material slotsYes2
Automation
AutoPrint ProYes
Download the file before the print startsNo3
Works
Depends
Not supported
Needs a camera
Needs a multi-material unit
SimplyPrint doesn't support this through this connection yet.
Voron Voron Trident owners on SimplyPrint
50+ printers use SimplyPrint
What slicer to use for the Voron Voron Trident
Use PrusaSlicer, OrcaSlicer, BambuStudio, ElegooSlicer, CrealityPrint, or Cura: each has a ready-made profile for the Voron Voron Trident.
We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Voron Voron Trident.
Cloud-Based Slicer for Voron Voron Trident: Use PrusaSlicer Online
Use PrusaSlicer and other slicers - directly in your browser with SimplyPrint's online cloud slicer. No installation required. Slice your Voron Voron Trident models from any device, anywhere in the world!
Automatic Profile Updates: Profiles are automatically checked and fetched from the slicer GitHub repositories every day, as well as from our own open-source community-driven slicer profile database. This ensures you always have access to the latest profiles.
Note: Other slicers, such as Simplify3D, ideaMaker, SuperSlicer and KISSlicer, aren't in our cloud, so we don't track their profiles. They may still work well with your Voron Voron Trident: check the slicer's own documentation or forums for a profile. You can also contribute profiles to our open-source slicer profile database on GitHub.
The app for the Voron Voron Trident
SimplyPrint works as the Voron Voron Trident's app: on your phone and in any browser, with a slicer in the cloud.
There's no plate swapper or auto-ejection kit for the Voron Voron Trident in SimplyPrint yet, but AutoPrint can still keep it printing: once the plate is clear, it starts the next job from your queue.
Enclosed printers push their prints out
The Voron Voron Trident's bed only moves up and down inside its enclosure, so instead of swapping plates, a push-off routine lets the toolhead push the cooled print off the plate and out through its front door, which has to be open while it runs. Some printers won't print with the door open (the Prusa CORE One has a door sensor), so check yours first.
Ways to automate it
Push prints off with the toolheadOn a CoreXY printer, a G-code routine can push the cooled print off the front of the plate before the next job starts.
Your own ejection G-codeWrite the routine that clears your plate, and AutoPrint runs it after every print.
Disclaimer:
We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Voron Voron Trident print?
Filament compatibility for the Voron Voron Trident: the materials it can handle, judged from its hotend, bed, chamber and enclosure.
Filament
Suitability
Notes
PLA
Great
The easiest filament to print. Works on almost any printer; a heated bed helps adhesion but is not required.
PETG
Great
Comfortably in range (PETG likes a ~230-250C hotend and a ~70-85C bed).
TPU & flexibles
Great
The direct-drive extruder feeds flexible filament well. Print slowly for clean results.
ABS & ASA
Great
Enclosed, with a hot enough hotend and bed: ABS and ASA print well.
Nylon (PA)
Good
Doable with care - dry the filament thoroughly, and an enclosure helps a lot.
Polycarbonate (PC)
Good
In range for PC. Dry the filament, print slowly, and use an enclosure for the best results.
Carbon-fiber & glass-filled
With care
Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Best filament for the Voron Voron Trident
Filaments the Voron Voron Trident prints well, Voron's own first, then the best known.
Compare the Voron Voron Trident with similar printers
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today. Compare up to four side by side, with their specs and how each connects.
Who makes the Voron Voron Trident, and how open Voron leaves you: whether its printers run without its cloud, take any filament and slicer, and can be repaired. Each area is rated from public sources.
Openness: Open (5.0 of 5)
Open
Walled gardenOpen
Voron is an open-source 3D printer project, not a company. The Voron Design team publishes complete CoreXY printer designs (CAD, bill of materials, manuals and Klipper configs) on GitHub under the GPLv3; you source the parts and build one yourself, or buy a kit from an independent vendor. Vorons suit people who want to build, understand and modify their own enclosed, fast printer.
Founded:
2015 ·
Ownership:
Open-source project run by the Voron Design team; Voron Design sells no printers, kits come from independent vendors ·
Website:vorondesign.com
Nothing is held back: GPLv3 designs, Klipper firmware and off-the-shelf parts. The trade-off is that you build it, and support it, yourself.
Firmware and custom firmware ●●●●●
Every stock Voron runs Klipper (GPLv3), which builders install themselves following the Voron documentation; the printer configs ship in the GPL-3.0 design repositories.
[3][5]
Local control and integrations ●●●●●
The documented setup runs Klipper on a Raspberry Pi in the printer, controlled through Mainsail or Fluidd (both built on Moonraker) or OctoPrint in a browser on your own network; Moonraker and OctoPrint both document their APIs. There is no Voron cloud or account.
[3][15][16]
Third-party filament, slicers and parts ●●●●●
Any filament and any slicer: OrcaSlicer and Cura ship Voron profiles. The bill of materials uses off-the-shelf parts such as MGN linear rails, Misumi extrusions and common hotends and electronics.
[4][14]
Repairs and spare parts ●●●●●
Every part is either an off-the-shelf component on the published bill of materials and sourcing guide, or a printable part with STL and CAD files on GitHub, so any part can be replaced or remade.
[5][4]
Community and documentation ●●●●●
Large community on Discord, the Voron forum and Reddit, a community mods repository (VoronUsers, over 3,300 GitHub stars) and full public build documentation. Design changes are published as tagged GitHub releases with change notes.
[2][13][8]
Pros
Fully open designs under the GPLv3: CAD, bill of materials and manuals on GitHub.
Runs Klipper on your own network; no cloud, account or lock-in.
Every part can be bought from many suppliers or printed.
Large, active community and a big library of mods.
Cons
You build it yourself, which takes many hours and some skill; the result depends on the builder and the kit.
No manufacturer warranty or support line: help comes from the community and your kit vendor, and Voron does not endorse kit vendors.
You need ABS-type printed parts, printed yourself or ordered through the community's Print it Forward service.
Track record
June 2026: Voron released Trident R2, with reworked stepper mounts, XY joints, front idlers and Z carriages; the release notes list what existing builds may want to update.
[9]
April 2026: Voron released the Cascade, an open-source desktop CNC milling machine, with CAD and a bill of materials on GitHub.
[12]
January 2023: Voron released the Voron 0.2, a revision of its small 120 mm printer; revision 0.2r1 followed in June 2023.
[11][10]
May 2022: Voron published Trident r1, the first revision of the Trident.
[8]
February 2022: Voron published V2.4r2, the current revision of the Voron 2.4.
[7]
August 2021: Voron released the Trident, a CoreXY with a fixed gantry and a bed on three Z motors.
[8]
Is the Voron Voron Trident compatible with SimplyPrint?
Yes. You can connect the Voron Voron Trident to SimplyPrint via Klipper (Moonraker), then slice, queue, start and monitor prints from your browser or the mobile app.
How do I connect the Voron Voron Trident to SimplyPrint?
Follow our step-by-step setup guide for the Voron Voron Trident. It shows how to connect it via Klipper (Moonraker), what you need for each, and which to pick.
What slicer should I use for the Voron Voron Trident?
We recommend PrusaSlicer for the Voron Voron Trident. You can run it, and 6 other slicers, directly in SimplyPrint's online slicer - no install, on any device, with profiles for the Voron Voron Trident kept up to date automatically.
Can I use OrcaSlicer with the Voron Voron Trident?
Yes. OrcaSlicer comes with a profile for the Voron Voron Trident, and you can run it in SimplyPrint's online slicer, so there's nothing to install.
What filament can the Voron Voron Trident print?
Based on its specs (hotend up to 280C, heated bed up to 100C), the Voron Voron Trident handles PLA, PETG, TPU & flexibles, or ABS & ASA well. See the full filament guide above for ABS, nylon, PC and composites.
Does the Voron Voron Trident work with OctoPrint or Klipper?
The Voron Voron Trident works with Klipper (Mainsail and Fluidd), and SimplyPrint connects to it through them - so you get cloud access, a queue and camera monitoring on top.
What is the Voron Voron Trident's bed size and build volume?
The Voron Voron Trident has a 350 x 350 mm print bed and prints up to 250 mm tall, a build volume of about 350 x 350 x 250 mm. See the full specifications table above for bed type, temperatures and more.
When did the Voron Voron Trident come out?
Voron launched the Voron Trident on August 31, 2021.
Can the Voron Voron Trident eject prints automatically?
There's no kit for it that we support yet, but SimplyPrint's AutoPrint can push prints off with the toolhead, or run your own ejection G-code, and then start the next job from your queue.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Klipper (Moonraker) 
Kiri:Moto
