Sweden
Add-North rPLA RE-ADD at a glance
Add-North rPLA RE-ADD is PLA filament by Add-North, a brand from Sweden. Print it with the nozzle at 215-245 °C and the bed at 0-60 °C. It comes in 1 colour, on 1 kg spools.
- Material
- PLA
- Nozzle
- 215-245 °C
- Bed
- 0-60 °C
- Diameter
- 1.75 mm
- Spool sizes
- 1 kg
- Colours
- 1
Add-North rPLA RE-ADD colours
-
- Black
Where to buy Add-North rPLA RE-ADD
We don't know a shop that sells it yet. Amazon may have it.
Search Amazon for the Add-North rPLA RE-ADD. The link opens your own country's Amazon where there is one.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Printers for Add-North rPLA RE-ADD
PLA is a basic material practically every 3D printer prints: 770 of the 770 printers in our catalog print it well. Below are the ones SimplyPrint users print with most.
Add-North rPLA RE-ADD in an AMS, CFS or ACE Pro, and its NFC tag
In a multi-material unit
PLA is the kind of filament multi-material units are made for.
The Open Filament Database doesn't record the spool's size or whether it is cardboard yet: check that it fits your unit.
NFC and RFID tags
Add-North puts no tag on its spools that we know of. SimplyPrint writes one for the system you use, so the spool works like the system maker's own:
OpenPrintTag: SimplyPrint writes a tag for this spool, so Prusa printers read it like their own.
QidiTech: SimplyPrint writes a tag for this spool, so QIDI printers read it like their own.
OpenSpool: SimplyPrint writes an open OpenSpool tag, which any OpenSpool reader can read.
OpenTag: SimplyPrint writes an open OpenTag tag, which any OpenTag reader can read.
Creality CFS: SimplyPrint writes a tag for this spool, so Creality printers read it like their own.
Anycubic ACE: SimplyPrint writes a tag for this spool, so Anycubic printers read it like their own.
ELEGOO Canvas: SimplyPrint writes a tag for this spool, so ELEGOO printers read it like their own.
TigerTag: SimplyPrint writes an open TigerTag tag, which any TigerTag reader can read.
Bambu Lab and Snapmaker U1 tags are signed by the printer maker, so we can't write them, but we can write the others. On those printers, SimplyPrint keeps track of the spool instead.
Add-North rPLA RE-ADD slicer profiles
Ready-made profiles from the slicer makers and Add-North, built into SimplyPrint's online slicer: pick the filament and slice, in your browser.
Add-North rPLA RE-ADD specifications
Temperatures, material and spools, as Add-North gives them in the Open Filament Database.
Printing
| Nozzle temperature | 215-245 °C |
|---|---|
| Bed temperature | 0-60 °C |
| Hardened nozzle | Not listed as abrasive |
Material
| Material | PLA |
|---|---|
| Properties | Recycled |
| Density | 1.25 g/cm³ |
| Brand from | Sweden |
Spools
| Diameter | 1.75 mm |
|---|---|
| Spool sizes | 1 kg |
| Colours | 1 |
| Refills without a spool | Unknown |
Is this data wrong? Edit it in the Open Filament Database: the fix reaches this page with the next import. The filament's file on GitHub
Compare Add-North rPLA RE-ADD with similar filaments
The same kind of filament from other brands, with a similar finish and temperatures, that you can buy.
-
Try Spectrum Pastello PLA on AmazonSpectrum Pastello PLAPLA · 185-215 °CPLA · Recycled · Sold online
Frequently asked questions
What temperature do I print Add-North rPLA RE-ADD at?
Add-North gives a nozzle temperature of 215-245 °C and a bed temperature of 0-60 °C. Start in the middle of the range and adjust for your printer.
Which 3D printers can print Add-North rPLA RE-ADD?
Practically any: PLA is a basic material nearly every 3D printer prints, and 770 of the 770 printers in our catalog print it well.
Does Add-North rPLA RE-ADD have an NFC or RFID tag?
Not from Add-North, as far as we know. SimplyPrint can write a tag for it for the OpenPrintTag, QidiTech, OpenSpool, OpenTag, Creality CFS, Anycubic ACE, ELEGOO Canvas and TigerTag, so the spool works like the system maker's own.
Is there a slicer profile for Add-North rPLA RE-ADD?
Yes, in OrcaSlicer, BambuStudio and ElegooSlicer, and they are built into SimplyPrint's online slicer.
Filament data: the Open Filament Database, an open, community-kept catalog that SimplyPrint helps run. Usage figures, printer ratings and NFC support are SimplyPrint's own.