Netherlands
FormFutura EasyFil ePLA at a glance
FormFutura EasyFil ePLA is PLA filament by FormFutura, a brand from Netherlands. Print it with the nozzle at 200-276 °C and the bed at 50-60 °C. It comes in 41 colours, on 250 g, 1 kg, 2 kg, 2.3 kg, 4.5 kg and 8 kg spools.
- Material
- PLA
- Nozzle
- 200-276 °C
- Bed
- 50-60 °C
- Diameter
- 1.75 mm and 2.85 mm
- Spool sizes
- 250 g, 1 kg, 2 kg, 2.3 kg, 4.5 kg and 8 kg
- Colours
- 41
FormFutura EasyFil ePLA colours
-
- Anthracite Grey
-
- Beige Brown
-
- Blue Lilac
-
- Grey Aluminium
-
- Heather Violet
-
- Iron Grey
-
- Khaki Grey
-
- Light Blue
-
- Light Green
-
- Light Grey
-
- Light Ivory
-
- Luminous Bright Orange
-
- Luminous Green
-
- Luminous Yellow
-
- Matt Apricot
-
- Matt Black
-
- Matt Lemon Cream
-
- Matt Light Grey
-
- Matt Mauve
-
- Matt Mint Green
-
- Matt Polar Blue
-
- Matt Soft Blue
-
- Matt Vanilla White
-
- Matt Water Blue
-
- Matt White
-
- Natural
-
- Pearl Bronze
-
- Pearl Gold
-
- Pure Orange
-
- Signal White
-
- Signal Yellow
-
- Snow White
-
- Squirrel Grey
-
- Traffic Black
-
- Traffic Green
-
- Traffic Red
-
- Traffic Yellow
-
- Turquoise Blue
-
- Ultramarine Blue
-
- White Aluminium
-
- Yellow Green
Where to buy FormFutura EasyFil ePLA
Shops that ship to you, the maker's own first. A shop shows one spool of the line, the 1.75 mm, 1 kg one where it sells it: pick the colour and size on its page.
Official store
Best for USA: FormFutura's global store
Bought straight from FormFutura, from the shop that serves where you are.
Search Amazon for the FormFutura EasyFil ePLA. The link opens your own country's Amazon where there is one.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Printers for FormFutura EasyFil ePLA
PLA is a basic material practically every 3D printer prints: 747 of the 747 printers in our catalog print it well. Below are the ones SimplyPrint users print with most.
FormFutura EasyFil ePLA in an AMS, CFS or ACE Pro, and its NFC tag
In a multi-material unit
PLA is the kind of filament multi-material units are made for.
The Open Filament Database doesn't record the spool's size or whether it is cardboard yet: check that it fits your unit.
NFC and RFID tags
FormFutura puts no tag on its spools that we know of. SimplyPrint writes one for the system you use, so the spool works like the system maker's own:
Creality CFS: SimplyPrint writes a tag for this spool, so Creality printers read it like their own.
Anycubic ACE: SimplyPrint writes a tag for this spool, so Anycubic printers read it like their own.
OpenPrintTag: SimplyPrint writes a tag for this spool, so Prusa printers read it like their own.
ELEGOO Canvas: SimplyPrint writes a tag for this spool, so ELEGOO printers read it like their own.
OpenSpool: SimplyPrint writes an open OpenSpool tag, which any OpenSpool reader can read.
QidiTech: SimplyPrint writes a tag for this spool, so QIDI printers read it like their own.
OpenTag: SimplyPrint writes an open OpenTag tag, which any OpenTag reader can read.
TigerTag: SimplyPrint writes an open TigerTag tag, which any TigerTag reader can read.
Bambu Lab and Snapmaker U1 tags are signed by the printer maker, so we can't write them, but we can write the others. On those printers, SimplyPrint keeps track of the spool instead.
FormFutura EasyFil ePLA slicer profiles
No slicer has a profile of its own for it that we know of. Start from your slicer's generic PLA profile and set the temperatures above.
FormFutura EasyFil ePLA specifications
Temperatures, material and spools, as FormFutura gives them in the Open Filament Database.
Printing
| Nozzle temperature | 200-276 °C |
|---|---|
| Bed temperature | 50-60 °C |
| Hardened nozzle | Not listed as abrasive |
Material
| Material | PLA |
|---|---|
| Properties | Some colours: Matte |
| Density | 1.24 g/cm³ |
| Brand from | Netherlands |
Spools
| Diameter | 1.75 mm and 2.85 mm |
|---|---|
| Spool sizes | 250 g, 1 kg, 2 kg, 2.3 kg, 4.5 kg and 8 kg |
| Colours | 41 |
| Refills without a spool | Sold |
Documents
| Technical data sheet | Download from FormFutura |
|---|---|
| Safety data sheet | Download from FormFutura |
Is this data wrong? Edit it in the Open Filament Database: the fix reaches this page with the next import. The filament's file on GitHub
Compare FormFutura EasyFil ePLA with similar filaments
The same kind of filament from other brands, with a similar finish and temperatures, that you can buy.
Frequently asked questions
What temperature do I print FormFutura EasyFil ePLA at?
FormFutura gives a nozzle temperature of 200-276 °C and a bed temperature of 50-60 °C. Start in the middle of the range and adjust for your printer.
Which 3D printers can print FormFutura EasyFil ePLA?
Practically any: PLA is a basic material nearly every 3D printer prints, and 747 of the 747 printers in our catalog print it well.
Does FormFutura EasyFil ePLA have an NFC or RFID tag?
Not from FormFutura, as far as we know. SimplyPrint can write a tag for it for the Creality CFS, Anycubic ACE, OpenPrintTag, ELEGOO Canvas, OpenSpool, QidiTech, OpenTag and TigerTag, so the spool works like the system maker's own.
Is there a slicer profile for FormFutura EasyFil ePLA?
Not one of its own that we know of. Use your slicer's generic PLA profile with the temperatures above.
Filament data: the Open Filament Database, an open, community-kept catalog that SimplyPrint helps run. Usage figures, printer ratings and NFC support are SimplyPrint's own.