USA
Protopasta Glitter PETG at a glance
Protopasta Glitter PETG is PETG filament by Protopasta, a brand from USA. Print it with the nozzle at 200-220 °C and the bed at 60-80 °C. It comes in 1 colour, on 500 g and 1 kg spools.
- Material
- PETG
- Nozzle
- 200-220 °C
- Bed
- 60-80 °C
- Diameter
- 1.75 mm
- Spool sizes
- 500 g and 1 kg
- Colours
- 1
Protopasta Glitter PETG colours
-
- Stardust Silver
Where to buy Protopasta Glitter PETG
We don't know a shop that sells it yet. Amazon may have it.
Search Amazon for the Protopasta Glitter PETG. The link opens your own country's Amazon where there is one.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Printers for Protopasta Glitter PETG
PETG is a basic material practically every 3D printer prints: 703 of the 747 printers in our catalog print it well. Below are the ones SimplyPrint users print with most.
Protopasta Glitter PETG in an AMS, CFS or ACE Pro, and its NFC tag
In a multi-material unit
PETG is the kind of filament multi-material units are made for.
The Open Filament Database doesn't record the spool's size or whether it is cardboard yet: check that it fits your unit.
NFC and RFID tags
Protopasta puts no tag on its spools that we know of. SimplyPrint writes one for the system you use, so the spool works like the system maker's own:
OpenPrintTag: SimplyPrint writes a tag for this spool, so Prusa printers read it like their own.
QidiTech: SimplyPrint writes a tag for this spool, so QIDI printers read it like their own.
OpenSpool: SimplyPrint writes an open OpenSpool tag, which any OpenSpool reader can read.
OpenTag: SimplyPrint writes an open OpenTag tag, which any OpenTag reader can read.
Creality CFS: SimplyPrint writes a tag for this spool, so Creality printers read it like their own.
Anycubic ACE: SimplyPrint writes a tag for this spool, so Anycubic printers read it like their own.
ELEGOO Canvas: SimplyPrint writes a tag for this spool, so ELEGOO printers read it like their own.
TigerTag: SimplyPrint writes an open TigerTag tag, which any TigerTag reader can read.
Bambu Lab and Snapmaker U1 tags are signed by the printer maker, so we can't write them, but we can write the others. On those printers, SimplyPrint keeps track of the spool instead.
Protopasta Glitter PETG slicer profiles
No slicer has a profile of its own for it that we know of. Start from your slicer's generic PETG profile and set the temperatures above.
Protopasta Glitter PETG specifications
Temperatures, material and spools, as Protopasta gives them in the Open Filament Database.
Printing
| Nozzle temperature | 200-220 °C |
|---|---|
| Bed temperature | 60-80 °C |
| Hardened nozzle | Not listed as abrasive |
Material
| Material | PETG |
|---|---|
| Properties | Glitter |
| Density | 1.2 g/cm³ |
| Brand from | USA |
Spools
| Diameter | 1.75 mm |
|---|---|
| Spool sizes | 500 g and 1 kg |
| Colours | 1 |
| Refills without a spool | Unknown |
Is this data wrong? Edit it in the Open Filament Database: the fix reaches this page with the next import. The filament's file on GitHub
Compare Protopasta Glitter PETG with similar filaments
The same kind of filament from other brands, with a similar finish and temperatures, that you can buy.
-
Try Spectrum PET-G Glitter PETG on AmazonSpectrum PET-G Glitter PETGPETG · 220-250 °CPETG · Glitter
Frequently asked questions
What temperature do I print Protopasta Glitter PETG at?
Protopasta gives a nozzle temperature of 200-220 °C and a bed temperature of 60-80 °C. Start in the middle of the range and adjust for your printer.
Which 3D printers can print Protopasta Glitter PETG?
Practically any: PETG is a basic material nearly every 3D printer prints, and 703 of the 747 printers in our catalog print it well.
Does Protopasta Glitter PETG have an NFC or RFID tag?
Not from Protopasta, as far as we know. SimplyPrint can write a tag for it for the OpenPrintTag, QidiTech, OpenSpool, OpenTag, Creality CFS, Anycubic ACE, ELEGOO Canvas and TigerTag, so the spool works like the system maker's own.
Is there a slicer profile for Protopasta Glitter PETG?
Not one of its own that we know of. Use your slicer's generic PETG profile with the temperatures above.
Filament data: the Open Filament Database, an open, community-kept catalog that SimplyPrint helps run. Usage figures, printer ratings and NFC support are SimplyPrint's own.