Czechia
Fillamentum CPE HG100 at a glance
Fillamentum CPE HG100 is CPE filament by Fillamentum, a brand from Czechia. Print it with the nozzle at 255-275 °C and the bed at 70-86 °C. It comes in 2 colours, on 750 g spools.
- Material
- CPE
- Nozzle
- 255-275 °C
- Bed
- 70-86 °C
- Diameter
- 1.75 mm
- Spool sizes
- 750 g
- Colours
- 2
Fillamentum CPE HG100 colours
-
- Ghost White
-
- Red Hood Transparent
Where to buy Fillamentum CPE HG100
We don't know a shop that sells it yet. Amazon may have it.
Search Amazon for the Fillamentum CPE HG100. The link opens your own country's Amazon where there is one.
Affiliate disclosure: Some links on this page are affiliate links. We may earn a commission if you make a purchase, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases.
Printers for Fillamentum CPE HG100
CPE is a basic material practically every 3D printer prints: 714 of the 758 printers in our catalog print it well. Below are the ones SimplyPrint users print with most.
Fillamentum CPE HG100 in an AMS, CFS or ACE Pro, and its NFC tag
In a multi-material unit
CPE is the kind of filament multi-material units are made for.
The Open Filament Database doesn't record the spool's size or whether it is cardboard yet: check that it fits your unit.
NFC and RFID tags
Fillamentum puts no tag on its spools that we know of. SimplyPrint writes one for the system you use, so the spool works like the system maker's own:
Creality CFS: SimplyPrint writes a tag for this spool, so Creality printers read it like their own.
Anycubic ACE: SimplyPrint writes a tag for this spool, so Anycubic printers read it like their own.
ELEGOO Canvas: SimplyPrint writes a tag for this spool, so ELEGOO printers read it like their own.
OpenPrintTag: SimplyPrint writes a tag for this spool, so Prusa printers read it like their own.
OpenSpool: SimplyPrint writes an open OpenSpool tag, which any OpenSpool reader can read.
QidiTech: SimplyPrint writes a tag for this spool, so QIDI printers read it like their own.
OpenTag: SimplyPrint writes an open OpenTag tag, which any OpenTag reader can read.
TigerTag: SimplyPrint writes an open TigerTag tag, which any TigerTag reader can read.
Bambu Lab and Snapmaker U1 tags are signed by the printer maker, so we can't write them, but we can write the others. On those printers, SimplyPrint keeps track of the spool instead.
Fillamentum CPE HG100 slicer profiles
No slicer has a profile of its own for it that we know of. Start from your slicer's generic CPE profile and set the temperatures above.
Fillamentum CPE HG100 specifications
Temperatures, material and spools, as Fillamentum gives them in the Open Filament Database.
Printing
| Nozzle temperature | 255-275 °C |
|---|---|
| Bed temperature | 70-86 °C |
| Hardened nozzle | Unknown |
Material
| Material | CPE |
|---|---|
| Properties | Some colours: Transparent |
| Density | 1.25 g/cm³ |
| Brand from | Czechia |
Spools
| Diameter | 1.75 mm |
|---|---|
| Spool sizes | 750 g |
| Colours | 2 |
| Refills without a spool | Unknown |
Documents
| Technical data sheet | Download from Fillamentum |
|---|
Is this data wrong? Edit it in the Open Filament Database: the fix reaches this page with the next import. The filament's file on GitHub
Compare Fillamentum CPE HG100 with similar filaments
The same kind of filament from other brands, with a similar finish and temperatures, that you can buy.
Frequently asked questions
What temperature do I print Fillamentum CPE HG100 at?
Fillamentum gives a nozzle temperature of 255-275 °C and a bed temperature of 70-86 °C. Start in the middle of the range and adjust for your printer.
Which 3D printers can print Fillamentum CPE HG100?
Practically any: CPE is a basic material nearly every 3D printer prints, and 714 of the 758 printers in our catalog print it well.
Does Fillamentum CPE HG100 have an NFC or RFID tag?
Not from Fillamentum, as far as we know. SimplyPrint can write a tag for it for the Creality CFS, Anycubic ACE, ELEGOO Canvas, OpenPrintTag, OpenSpool, QidiTech, OpenTag and TigerTag, so the spool works like the system maker's own.
Is there a slicer profile for Fillamentum CPE HG100?
Not one of its own that we know of. Use your slicer's generic CPE profile with the temperatures above.
Filament data: the Open Filament Database, an open, community-kept catalog that SimplyPrint helps run. Usage figures, printer ratings and NFC support are SimplyPrint's own.