Zortrax M200 Plus: specs, SimplyPrint compatibility and setup

By Zortrax, Poland Launched March 2018

Zortrax M200 Plus image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works Buy from Zortrax

Zortrax M200 Plus at a glance

The Zortrax M200 Plus is a 3D printer by Zortrax with a 200 x 200 x 180 mm build volume.

Build volume
200 x 200 x 180 mm
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC)
Built-in camera
Yes
Connectivity
Wi-Fi, Ethernet, USB
All specifications

Connect the Zortrax M200 Plus to SimplyPrint

Does the Zortrax M200 Plus 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Prints only Z-SUITE's own job files, sent over the network or from a USB stick; no USB serial printing. Source

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not compatible

    Closed Zortrax firmware on an Android-based controller; no Klipper. Source

No known way to connect it to SimplyPrint

Unfortunately, the Zortrax M200 Plus is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Zortrax M200 Plus

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M200 Plus that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Zortrax M200 Plus

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Zortrax M200 Plus.

No online slicing for the Zortrax M200 Plus

The app for the Zortrax M200 Plus

Zortrax's own app is Zortrax inCloud.

Zortrax M200 Plus specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 200 x 200 x 180 mm
Bed type Square
Bed size 200 x 200 mm
Max print height 180 mm

Printing

Max extruder temperature 290 °C
Has heated bed Yes
Max bed temperature 105 °C
Number of nozzles 1
Toolheads 1
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) No

Connecting

Connectivity Wi-Fi, Ethernet, USB
Built-in camera Yes
Prints from USB stick
Supports serial printing No
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Zortrax
Printer model name M200 Plus
Made by a company from Poland
Launched March 2018
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Zortrax M200 Plus print?

Filament compatibility for the Zortrax M200 Plus: the materials Zortrax lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled With care Possible if you fit a hardened or wear-resistant nozzle - the abrasive fibers quickly wear a stock brass nozzle.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

Printers like the Zortrax M200 Plus that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Flashforge Adventurer 5M Pro 3D printer
    Flashforge Adventurer 5M Pro
    220 x 220 x 220 mm
    Launched September 5, 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Wanhao D6 Plus 3D printer
    Wanhao D6 Plus
    200 x 200 x 175 mm
    Connects with: OctoPrint
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • QIDI X-Smart 3 3D printer
    QIDI X-Smart 3
    175 x 180 x 170 mm
    Launched April 2023
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • LulzBot Mini 3 3D printer
    LulzBot Mini 3
    180 x 180 x 180 mm
    Launched July 18, 2024
    Connects with: Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All Zortrax printers

Where to buy the Zortrax M200 Plus

Zortrax Official store

Best for USA: Zortrax's global store

Bought straight from Zortrax, from the shop that serves where you are.

Buy from Zortrax

Frequently asked questions

Is the Zortrax M200 Plus compatible with SimplyPrint?

To our knowledge the Zortrax M200 Plus is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Zortrax M200 Plus?

None of the slicers in SimplyPrint's cloud can slice for the Zortrax M200 Plus that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Zortrax M200 Plus print?

Zortrax lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA) and Polycarbonate (PC) for the M200 Plus.

What is the Zortrax M200 Plus's bed size and build volume?

The Zortrax M200 Plus has a 200 x 200 mm print bed and prints up to 180 mm tall, a build volume of about 200 x 200 x 180 mm. See the full specifications table above for bed type, temperatures and more.

When did the Zortrax M200 Plus come out?

Zortrax launched the M200 Plus in March 2018.

Where can I buy the Zortrax M200 Plus?

From Zortrax's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.