WonderMaker ZR Ultra: specs, SimplyPrint compatibility and setup

By WonderMaker, China Launched April 2025

WonderMaker ZR Ultra image

Does it work with SimplyPrint?

Not confirmed yet - help us find out We can't tell

We don't know yet. If you have one, you can find out in a few minutes and confirm it for everyone.

Find out if it works

WonderMaker ZR Ultra at a glance

The WonderMaker ZR Ultra is a multi-head printer with four independently heated toolheads (each up to 300 °C), a 300 x 270 x 290 mm build volume and 600 mm/s speed. It is for makers and prosumers who want fast multi-colour or multi-material prints with little purge waste.

Build volume
300 x 270 x 290 mm
Max print speed
600 mm/s
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
Built-in camera
No
Connectivity
Wi-Fi, USB
All specifications

Connect the WonderMaker ZR Ultra to SimplyPrint

Does the WonderMaker ZR Ultra 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not confirmed yet - help us find out

    Help us confirm Be one of the first to confirm it
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not confirmed yet - help us find out

    Klipper-based: the maker's slicer profiles inherit a Klipper base and its GitHub forks Klipper, Moonraker, Fluidd and Mainsail. Whether Moonraker is reachable on shipped units is not confirmed. Source

    Help us confirm Be one of the first to confirm it
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Klipper-based; OctoPrint would only run on top of it. Source

    Find out how to check

What slicer to use for the WonderMaker ZR Ultra

None of the slicers in SimplyPrint's cloud can slice for the WonderMaker ZR Ultra that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the WonderMaker ZR Ultra

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the WonderMaker ZR Ultra.

No online slicing for the WonderMaker ZR Ultra

The app for the WonderMaker ZR Ultra

WonderMaker's own app is WonderMaker App.

WonderMaker ZR Ultra specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 300 x 270 x 290 mm
Bed type Rectangle
Bed size 300 x 270 mm
Max print height 290 mm

Printing

Max print speed 600 mm/s
Max extruder temperature 300 °C
Has heated bed Yes
Max bed temperature 100 °C
Number of nozzles 4
Toolheads 4
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer Yes
IDEX (independent dual extruders) No

Connecting

Connectivity Wi-Fi, USB
Built-in camera No
Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand WonderMaker
Printer model name ZR Ultra
Made by a company from China
Launched April 2025
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the WonderMaker ZR Ultra print?

Filament compatibility for the WonderMaker ZR Ultra: the materials WonderMaker lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

When to choose the WonderMaker ZR Ultra

Choose the ZR Ultra when you print in several colours or materials and want less filament waste and shorter colour changes than a single-toolhead printer. The WonderMaker ZR is the simpler single-toolhead option with a slightly larger plate. We hold little on it and no SimplyPrint connection method is confirmed, so it is a risky pick if SimplyPrint control is your reason to buy.

Pros

  • Four independent toolheads, each heated up to 300 °C, to mix colours, materials and nozzle sizes in one print (WonderMaker).
  • 600 mm/s and 20,000 mm/s2 acceleration, with WonderMaker claiming a multi-colour print in 57 min 55 s against 1 h 34 min on another printer (WonderMaker's own test).
  • Less purging on colour changes than a single-toolhead printer, which reduces waste (WonderMaker).
  • Auto bed leveling, filament runout detection and power-loss recovery (WonderMaker).
  • 5-inch touchscreen, built-in lighting and remote monitoring with an optional camera (WonderMaker).

Cons

  • We have not confirmed how it connects to SimplyPrint: Klipper is unknown and OctoPrint is unlikely.
  • The maker's page does not say whether it is enclosed, and our facts hold no enclosure value; we cannot say it suits ABS or classroom use.
  • A camera is an optional extra, not built in (WonderMaker).
  • No independent hands-on review found; the speed and waste claims are WonderMaker's own.

Who it suits

  • Schools Can work

    Multi-colour printing is engaging for students, but enclosure is unknown and the SimplyPrint connection is unconfirmed.

  • Hobbyists Good fit

    A fast multi-colour printer with independent toolheads, if you accept that it is new and unreviewed.

  • Businesses Can work

    Useful for multi-material prototypes; the lack of independent reviews and unknown enclosure hold it back.

  • Print farms Not a good fit

    Optional camera, unconfirmed SimplyPrint connection and a complex toolhead system make it a weak fleet unit.

Written from the maker's information and independent reviews. Read more by the manufacturer

Printers like the WonderMaker ZR Ultra that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Bambu Lab P1S 3D printer
    Bambu Lab P1S
    256 x 256 x 256 mm
    Launched July 13, 2023
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Verified by SimplyPrint
  • Bambu Lab P2S Combo 3D printer
    Bambu Lab P2S Combo
    256 x 256 x 256 mm
    Launched October 14, 2025
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Verified by SimplyPrint
  • Creality K1 Max 3D printer
    Creality K1 Max
    300 x 300 x 300 mm
    Launched July 14, 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Anycubic Kobra S1 3D printer
    Anycubic Kobra S1
    250 x 250 x 250 mm
    Launched January 2, 2025
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All WonderMaker printers

Frequently asked questions

Is the WonderMaker ZR Ultra compatible with SimplyPrint?

We don't know yet. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations; if you have a WonderMaker ZR Ultra, our compatibility check tells you in a few questions how it could connect.

What slicer should I use for the WonderMaker ZR Ultra?

None of the slicers in SimplyPrint's cloud can slice for the WonderMaker ZR Ultra that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the WonderMaker ZR Ultra print?

WonderMaker lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the ZR Ultra.

What is the WonderMaker ZR Ultra's bed size and build volume?

The WonderMaker ZR Ultra has a 300 x 270 mm print bed and prints up to 290 mm tall, a build volume of about 300 x 270 x 290 mm. See the full specifications table above for bed type, temperatures and more.

When did the WonderMaker ZR Ultra come out?

WonderMaker launched the ZR Ultra in April 2025.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.