Raise3D E3: specs, SimplyPrint compatibility and setup

By Raise3D, China Launched September 2025

Raise3D E3 image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works Buy from Raise3D

Raise3D E3 at a glance

The E3 is Raise3D's enclosed IDEX printer: two independent extruders, a 330 x 240 x 240 mm volume (295 mm wide in dual mode), a 330 °C hotend and a HEPA filter with activated charcoal. It is for businesses and labs that print flexible and composite materials, or duplicate small parts in mirror and duplication modes.

Build volume
330 x 240 x 240 mm
Enclosure
Fully enclosed
Max print speed
200 mm/s
Motion system
Other kinematics
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
Built-in camera
Yes
Connectivity
Wi-Fi, Ethernet, USB
All specifications

Connect the Raise3D E3 to SimplyPrint

Does the Raise3D E3 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not expected to work

    Ships Raise3D's own embedded-Linux firmware (ideaMaker, RaiseCloud, Raise3D API); no Klipper or Moonraker mentioned. Source

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    No USB device port for a computer: the USB ports are host ports for flash drives, and the motion controller is driven by Raise3D's embedded-Linux logic board (ideaMaker, RaiseCloud, Raise3D API). Not expected to work as shipped. Source

    Find out how to check

No known way to connect it to SimplyPrint

Unfortunately, the Raise3D E3 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Raise3D E3

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E3, and it doesn't take standard G-code that we know of.

Raise3D's own slicer

  • ideaMaker
    Made by Raise3D, not in the SimplyPrint cloud

No profile for the Raise3D E3

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Raise3D E3.

No online slicing for the Raise3D E3

Get ideaMaker

The app for the Raise3D E3

Raise3D's own app is RaiseCloud.

Raise3D E3 specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 330 x 240 x 240 mm
Bed type Square
Bed size 330 x 240 mm
Max print height 240 mm

Printing

Enclosure Fully enclosed
Motion system Other kinematics
Max print speed 200 mm/s
Max extruder temperature 330 °C
Has heated bed Yes
Max bed temperature 110 °C
Number of nozzles 2
Toolheads 2
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) Yes

Connecting

Connectivity Wi-Fi, Ethernet, USB
Built-in camera Yes
Prints from USB stick
Supports serial printing Unknown
Shipped firmware The maker's own

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Raise3D
Printer model name E3
Made by a company from China
Launched September 2025
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Raise3D E3 print?

Filament compatibility for the Raise3D E3: the materials Raise3D lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.
High-temperature (PEI, PEEK, PEKK) Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

When to choose the Raise3D E3

Choose the E3 for TPU and composite work from a professional maker: with Raise3D's Flexible Filament Auxiliary Feeder it prints TPU up to 200 mm/s, and an optional composite print head handles PET-CF, PET-GF and PPS-CF. It succeeds the E2 and E2CF and launched at $2,499 in 2025. We found no independent review, and our data rates Klipper and OctoPrint as unlikely for it, so we hold no confirmed way to connect it to SimplyPrint. If you want an enclosed printer that works with SimplyPrint through OctoPrint for less, see the Prusa CORE One+.

Pros

  • Independent dual extruders with mirror, duplication, dual-colour and dual-material modes (Raise3D).
  • Fully enclosed, with a HEPA and activated-charcoal filter and a noise level Raise3D gives as under 55 dB(A) (Raise3D).
  • Fast TPU printing up to 200 mm/s with the optional auxiliary feeder, and an optional composite head (Raise3D).
  • Two desiccant material slots, filament run-out sensors, power-loss recovery and 9-point levelling (Raise3D).
  • Wi-Fi, LAN, USB and a live camera (Raise3D).

Cons

  • No confirmed way to connect it to SimplyPrint: Klipper and OctoPrint are rated unlikely in our data.
  • Launched at $2,499 (3D Printing Industry), which is a lot for a 330 x 240 x 240 mm printer.
  • The optional parts, the auxiliary feeder and composite head, cost extra, and maximum volumetric speed is 16 mm³/s (Raise3D).
  • We found no independent review.

Who it suits

  • Schools Can work

    Enclosed, filtered and under 55 dB(A), but the price is high and SimplyPrint can't run it today.

  • Hobbyists Can work

    Capable dual-extruder printing for TPU and composites, but expensive for hobby use.

  • Businesses Good fit

    A professional enclosed IDEX for flexible and composite parts, though no independent review exists and the SimplyPrint connection is unconfirmed.

  • Print farms Not a good fit

    No confirmed SimplyPrint connection and a high price per unit make a fleet a poor fit.

Written from the maker's information and independent reviews. Read more by the manufacturer

Printers like the Raise3D E3 that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Bambu Lab P1S 3D printer
    Bambu Lab P1S
    256 x 256 x 256 mm
    Launched July 13, 2023
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Verified by SimplyPrint
  • Bambu Lab P2S Combo 3D printer
    Bambu Lab P2S Combo
    256 x 256 x 256 mm
    Launched October 14, 2025
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Verified by SimplyPrint
  • Creality K1 Max 3D printer
    Creality K1 Max
    300 x 300 x 300 mm
    Launched July 14, 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Anycubic Kobra S1 3D printer
    Anycubic Kobra S1
    250 x 250 x 250 mm
    Launched January 2, 2025
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All Raise3D printers

Where to buy the Raise3D E3

Raise3D Official store

Best for USA: Raise3D's store for the US

Bought straight from Raise3D, from the shop that serves where you are.

$2,499.00 Price at Raise3D, checked October 23, 2026
Buy from Raise3D
Somewhere else? Raise3D's other stores

Frequently asked questions

Is the Raise3D E3 compatible with SimplyPrint?

To our knowledge the Raise3D E3 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Raise3D E3?

Use Raise3D's own slicer, ideaMaker: none of the slicers in SimplyPrint's cloud has a profile for the Raise3D E3, and it doesn't take standard G-code that we know of.

What filament can the Raise3D E3 print?

Raise3D lists PLA, PETG, TPU & flexibles, ABS & ASA, Polycarbonate (PC), Nylon (PA), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the E3.

What is the Raise3D E3's bed size and build volume?

The Raise3D E3 has a 330 x 240 mm print bed and prints up to 240 mm tall, a build volume of about 330 x 240 x 240 mm. See the full specifications table above for bed type, temperatures and more.

When did the Raise3D E3 come out?

Raise3D launched the E3 in September 2025.

Where can I buy the Raise3D E3?

From Raise3D's own store, which has shops for the EU and the US. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.