China
Intamsys FUNMAT PRO 310 NEO at a glance
The Intamsys FUNMAT PRO 310 NEO is a 3D printer by Intamsys with a 305 x 260 x 260 mm build volume.
- Build volume
- 305 x 260 x 260 mm
- Enclosure
- Fully enclosed
- Max print speed
- 500 mm/s
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
Connect the Intamsys FUNMAT PRO 310 NEO to SimplyPrint
Does the Intamsys FUNMAT PRO 310 NEO 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
-
Klipper (Moonraker)
Not expected to work
Industrial IDEX printer on INTAMSYS's own NXP-based mainboard and INTAMSUITE software; no sign of Klipper or Moonraker. Source
-
OctoPrint
Directly, over USB
Not expected to work
Closed industrial workflow via INTAMSUITE; no USB serial printing documented. Source
No known way to connect it to SimplyPrint
Unfortunately, the Intamsys FUNMAT PRO 310 NEO is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the Intamsys FUNMAT PRO 310 NEO
None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 310 NEO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the Intamsys FUNMAT PRO 310 NEO
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the Intamsys FUNMAT PRO 310 NEO.
No online slicing for the Intamsys FUNMAT PRO 310 NEO
Intamsys FUNMAT PRO 310 NEO specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 305 x 260 x 260 mm |
|---|---|
| Bed type | Square |
| Bed size | 305 x 260 mm |
| Max print height | 260 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max print speed | 500 mm/s |
| Max extruder temperature | 350 °C |
| Has heated bed | Yes |
| Max bed temperature | 100 °C |
| Heated chamber | Up to 100 °C |
| Number of nozzles | 2 |
| Toolheads | 2 |
| Direct drive | No |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Multi-material
| Toolchanger or hotend changer | No |
|---|---|
| IDEX (independent dual extruders) | Yes |
Connecting
| Supports serial printing | Unknown |
|---|---|
| Shipped firmware | Unknown |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | Intamsys |
|---|---|
| Printer model name | FUNMAT PRO 310 NEO |
| Made by a company from | China |
| Launched | September 2024 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the Intamsys FUNMAT PRO 310 NEO print?
Filament compatibility for the Intamsys FUNMAT PRO 310 NEO: the materials Intamsys lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the Intamsys FUNMAT PRO 310 NEO that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
Bambu Lab P1S
256 x 256 x 256 mmLaunched July 13, 2023Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Verified by SimplyPrint -
Bambu Lab P2S Combo
256 x 256 x 256 mmLaunched October 14, 2025Connects with: SimplyPrint ClientSimilar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledVerified by SimplyPrint -
Creality K1 Max
300 x 300 x 300 mmLaunched July 14, 2023Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible -
Anycubic Kobra S1
250 x 250 x 250 mmLaunched January 2, 2025Connects with: SimplyPrint Client, Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible
Where to buy the Intamsys FUNMAT PRO 310 NEO
Official store
Best for USA: Intamsys's global store
Bought straight from Intamsys, from the shop that serves where you are.
Frequently asked questions
Is the Intamsys FUNMAT PRO 310 NEO compatible with SimplyPrint?
To our knowledge the Intamsys FUNMAT PRO 310 NEO is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the Intamsys FUNMAT PRO 310 NEO?
None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 310 NEO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the Intamsys FUNMAT PRO 310 NEO print?
Intamsys lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC) and Carbon-fiber & glass-filled for the FUNMAT PRO 310 NEO.
What is the Intamsys FUNMAT PRO 310 NEO's bed size and build volume?
The Intamsys FUNMAT PRO 310 NEO has a 305 x 260 mm print bed and prints up to 260 mm tall, a build volume of about 305 x 260 x 260 mm. See the full specifications table above for bed type, temperatures and more.
When did the Intamsys FUNMAT PRO 310 NEO come out?
Intamsys launched the FUNMAT PRO 310 NEO in September 2024.
Where can I buy the Intamsys FUNMAT PRO 310 NEO?
From Intamsys's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.