Intamsys FUNMAT PRO 310 APOLLO: specs, SimplyPrint compatibility and setup

By Intamsys, China Launched November 2025

Intamsys FUNMAT PRO 310 APOLLO image

Does it work with SimplyPrint?

Not expected to work Most likely not

We don't expect it to work, but we could be wrong.

Find out if it works Buy from Intamsys

Intamsys FUNMAT PRO 310 APOLLO at a glance

The FUNMAT PRO 310 APOLLO is an industrial dual-nozzle (IDEX) printer from Intamsys for high-performance polymers such as PEEK, PEKK and carbon- or glass-filled PAEK. It is for companies that print functional end-use parts and run certified workflows, not for casual use.

Build volume
305 x 260 x 260 mm
Enclosure
Fully enclosed
Max print speed
200 mm/s
Prints well
PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
All specifications

Connect the Intamsys FUNMAT PRO 310 APOLLO to SimplyPrint

Does the Intamsys FUNMAT PRO 310 APOLLO 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.

  • SimplyPrint

    SimplyPrint

    Not expected to work

    Find out how to check
  • Mainsail Fluidd

    Klipper (Moonraker)

    Not expected to work

    Closed industrial machine run through INTAMSYS's own INTAMSUITE software (with its own SDK/API); no sign of Klipper or Moonraker. Source

    Find out how to check
  • OctoPrint

    OctoPrint

    Directly, over USB

    Not expected to work

    Industrial PAEK printer with a safety PLC, managed via INTAMSUITE Local Print; no USB serial printing documented. Source

    Find out how to check

No known way to connect it to SimplyPrint

Unfortunately, the Intamsys FUNMAT PRO 310 APOLLO is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.

How we determine compatibility

We consider a printer compatible if it works with one or more of the following:

  • SimplyPrint custom integration for this specific model
  • OctoPrint support (requires the printer to support serial printing)
  • Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)

OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.

Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.

See printers that work View Compatible Printers

What slicer to use for the Intamsys FUNMAT PRO 310 APOLLO

None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 310 APOLLO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

No profile for the Intamsys FUNMAT PRO 310 APOLLO

We only list slicers you can use in the SimplyPrint cloud, so there may be others for the Intamsys FUNMAT PRO 310 APOLLO.

No online slicing for the Intamsys FUNMAT PRO 310 APOLLO

Intamsys FUNMAT PRO 310 APOLLO specifications: bed size, print height and more

Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer

Size

Build volume 305 x 260 x 260 mm
Bed type Square
Bed size 305 x 260 mm
Max print height 260 mm

Printing

Enclosure Fully enclosed
Max print speed 200 mm/s
Max extruder temperature 450 °C
Has heated bed Yes
Max bed temperature 160 °C
Heated chamber Up to 100 °C
Number of nozzles 2
Toolheads 2
Direct drive No
Probing tool / Auto Bed Leveling Yes
Filament width 1.75 mm

Multi-material

Toolchanger or hotend changer No
IDEX (independent dual extruders) Yes

Connecting

Supports serial printing Unknown
Shipped firmware Unknown

Files and slicing

Supported file formats G-code (.gcode, .gco, .g)

The printer

Printer manufacturer / brand Intamsys
Printer model name FUNMAT PRO 310 APOLLO
Made by a company from China
Launched November 2025
Still made Yes

Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.

What filament can the Intamsys FUNMAT PRO 310 APOLLO print?

Filament compatibility for the Intamsys FUNMAT PRO 310 APOLLO: the materials Intamsys lists for it.

Filament Suitability Notes
PLA Great On the maker's list of materials for this printer.
PETG Great On the maker's list of materials for this printer.
TPU & flexibles Great On the maker's list of materials for this printer.
ABS & ASA Great On the maker's list of materials for this printer.
Nylon (PA) Great On the maker's list of materials for this printer.
Polycarbonate (PC) Great On the maker's list of materials for this printer.
Carbon-fiber & glass-filled Great On the maker's list of materials for this printer.
High-temperature (PEI, PEEK, PEKK) Great On the maker's list of materials for this printer.

Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.

When to choose the Intamsys FUNMAT PRO 310 APOLLO

Choose the APOLLO when you need PEEK-class parts with a heated chamber and dried filament, and you are buying through a quote rather than off a shelf. Intamsys quotes a chamber temperature up to 100 °C, a 450 °C hotend (our figure), two nozzles with mirror and duplicate modes, and two 3 kg dry boxes. We found no independent review of it, so its real-world results are unverified. If you only print PLA, PETG or ABS, a far cheaper enclosed printer such as a Bambu Lab P2S or similar does the job; for SimplyPrint, note that it does not connect through Klipper or OctoPrint.

Pros

  • Built for the PAEK family (PEEK, PEKK, PEEK-CF, PEEK-GF) with a chamber that holds a stable temperature up to 100 °C (Intamsys).
  • Independent dual nozzles with mirror and duplicate modes, so two identical parts print at once (Intamsys).
  • Two 3 kg active dry boxes up to 65 °C and RFID spool recognition come with it (Intamsys).
  • Fully enclosed, and Intamsys lists 35 compatible materials, so ABS, nylon and PC are well within reach.
  • Comes with Intamsys's own INTAMSUITE for central monitoring and remote control, plus data logging for quality records (Intamsys).

Cons

  • No price is published; Intamsys asks you to request a quote.
  • Not a SimplyPrint-ready printer today: our catalog rates both Klipper and OctoPrint as unlikely, so queueing and remote control through SimplyPrint is not expected to work.
  • A heavy industrial machine, about 80 kg and 700 x 655 x 750 mm, which needs a dedicated spot.
  • No independent review found yet, and Intamsys states no camera in its listing.

Who it suits

  • Schools Not a good fit

    It is aimed at industrial polymers at very high temperatures and priced by quote, well beyond what a classroom needs, and it does not connect to SimplyPrint for approval queues.

  • Hobbyists Not a good fit

    The price and the engineering-polymer focus are out of reach for hobby use, where a far cheaper enclosed printer does the same PLA, PETG and ABS work.

  • Businesses Great fit

    A heated chamber, PEEK support, dry boxes and quality data logging suit companies printing functional end-use parts, though we hold no independent test results.

  • Print farms Can work

    Intamsys provides its own central monitoring, but it is a single large machine rather than a fleet unit and does not connect to SimplyPrint.

Written from the maker's information and independent reviews. Read more by the manufacturer

Printers like the Intamsys FUNMAT PRO 310 APOLLO that work with SimplyPrint

Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.

  • Bambu Lab P1S 3D printer
    Bambu Lab P1S
    256 x 256 x 256 mm
    Launched July 13, 2023
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Verified by SimplyPrint
  • Bambu Lab P2S Combo 3D printer
    Bambu Lab P2S Combo
    256 x 256 x 256 mm
    Launched October 14, 2025
    Connects with: SimplyPrint Client
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled
    Verified by SimplyPrint
  • Creality K1 Max 3D printer
    Creality K1 Max
    300 x 300 x 300 mm
    Launched July 14, 2023
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
  • Anycubic Kobra S1 3D printer
    Anycubic Kobra S1
    250 x 250 x 250 mm
    Launched January 2, 2025
    Connects with: SimplyPrint Client, Klipper (Moonraker)
    Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)
    Compatible
Compare 3D printers that work with SimplyPrint All Intamsys printers

Where to buy the Intamsys FUNMAT PRO 310 APOLLO

Intamsys Official store

Best for USA: Intamsys's global store

Bought straight from Intamsys, from the shop that serves where you are.

Buy from Intamsys

Frequently asked questions

Is the Intamsys FUNMAT PRO 310 APOLLO compatible with SimplyPrint?

To our knowledge the Intamsys FUNMAT PRO 310 APOLLO is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.

What slicer should I use for the Intamsys FUNMAT PRO 310 APOLLO?

None of the slicers in SimplyPrint's cloud can slice for the Intamsys FUNMAT PRO 310 APOLLO that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.

What filament can the Intamsys FUNMAT PRO 310 APOLLO print?

Intamsys lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the FUNMAT PRO 310 APOLLO.

What is the Intamsys FUNMAT PRO 310 APOLLO's bed size and build volume?

The Intamsys FUNMAT PRO 310 APOLLO has a 305 x 260 mm print bed and prints up to 260 mm tall, a build volume of about 305 x 260 x 260 mm. See the full specifications table above for bed type, temperatures and more.

When did the Intamsys FUNMAT PRO 310 APOLLO come out?

Intamsys launched the FUNMAT PRO 310 APOLLO in November 2025.

Where can I buy the Intamsys FUNMAT PRO 310 APOLLO?

From Intamsys's own store, which has shops for everywhere else. The links on this page go to those stores; some are affiliate links, so we may earn a commission at no extra cost to you.

© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.