Germany
BigRep ALTRA 280 at a glance
The BigRep ALTRA 280 is a 3D printer by BigRep with a 500 x 700 x 800 mm build volume.
- Build volume
- 500 x 700 x 800 mm
- Enclosure
- Fully enclosed
- Prints well
- PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled, High-temperature (PEI, PEEK, PEKK)
- Built-in camera
- Yes
Connect the BigRep ALTRA 280 to SimplyPrint
Does the BigRep ALTRA 280 3D printer work with SimplyPrint, OctoPrint, Mainsail and Fluidd? Each way of connecting it, what it needs, and how to set it up.
No known way to connect it to SimplyPrint
Unfortunately, the BigRep ALTRA 280 is currently not, to our knowledge, compatible with OctoPrint, Mainsail, Fluidd, or SimplyPrint. For the best 3D printing experience, consider other 3D printers that are compatible with these softwares.
How we determine compatibility
We consider a printer compatible if it works with one or more of the following:
- SimplyPrint custom integration for this specific model
- OctoPrint support (requires the printer to support serial printing)
- Klipper support (printer can run Klipper, either by flashing compatible firmware or using an external controller/pad)
OctoPrint compatibility is primarily based on whether the printer supports serial communication. If serial printing is not supported, we mark OctoPrint as not compatible.
Note: Some printers have third-party OctoPrint plugins that enable unofficial/custom connections. We don’t maintain a list of these plugins, so they are not reflected in our compatibility data.
What slicer to use for the BigRep ALTRA 280
None of the slicers in SimplyPrint's cloud can slice for the BigRep ALTRA 280 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
No profile for the BigRep ALTRA 280
PrusaSlicer
OrcaSlicer
BambuStudio
ElegooSlicer
CrealityPrint
Cura
Kiri:MotoWe only list slicers you can use in the SimplyPrint cloud, so there may be others for the BigRep ALTRA 280.
No online slicing for the BigRep ALTRA 280
BigRep ALTRA 280 specifications: bed size, print height and more
Its size, temperatures, multi-material and how it connects, from the maker and our own research. Read more by the manufacturer
Size
| Build volume | 500 x 700 x 800 mm |
|---|---|
| Bed type | Rectangle |
| Bed size | 500 x 700 mm |
| Max print height | 800 mm |
Printing
| Enclosure | Fully enclosed |
|---|---|
| Max extruder temperature | 450 °C |
| Has heated bed | Yes |
| Max bed temperature | 180 °C |
| Heated chamber | Up to 180 °C |
| Number of nozzles | 1 |
| Direct drive | Yes |
| Probing tool / Auto Bed Leveling | Yes |
| Filament width | 1.75 mm |
Connecting
| Built-in camera | Yes |
|---|---|
| Supports serial printing | Unknown |
| Shipped firmware | Unknown |
Files and slicing
| Supported file formats | G-code (.gcode, .gco, .g) |
|---|
The printer
| Printer manufacturer / brand | BigRep |
|---|---|
| Printer model name | ALTRA 280 |
| Made by a company from | Germany |
| Launched | May 28, 2024 |
| Still made | Yes |
Disclaimer: We strive to keep this information as current and accurate as possible, but cannot guarantee its completeness or reliability. Our data is based on user submissions and manufacturer references.
What filament can the BigRep ALTRA 280 print?
Filament compatibility for the BigRep ALTRA 280: the materials BigRep lists for it.
| Filament | Suitability | Notes |
|---|---|---|
| PLA | Great | On the maker's list of materials for this printer. |
| PETG | Great | On the maker's list of materials for this printer. |
| TPU & flexibles | Great | On the maker's list of materials for this printer. |
| ABS & ASA | Great | On the maker's list of materials for this printer. |
| Nylon (PA) | Great | On the maker's list of materials for this printer. |
| Polycarbonate (PC) | Great | On the maker's list of materials for this printer. |
| Carbon-fiber & glass-filled | Great | On the maker's list of materials for this printer. |
| High-temperature (PEI, PEEK, PEKK) | Great | On the maker's list of materials for this printer. |
Tip: this is a general guide from the printer's specs - always check your filament's recommended settings. With SimplyPrint you can save a profile for each spool and track exactly what filament you have in stock.
Printers like the BigRep ALTRA 280 that work with SimplyPrint
Printers from the same maker, of a similar size, printing the same engineering materials or multi-material like it, that you can buy today and that we know work with SimplyPrint.
-
MINGDA MD-600D
600 x 600 x 600 mmLaunched 2023Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledCompatible -
MINGDA MD-600 Pro+
600 x 600 x 600 mmLaunched 2026Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledExpected to work -
MINGDA MD-600D Ultra
600 x 600 x 600 mmLaunched 2026Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filledExpected to work -
re:3D Gigabot 4
590 x 600 x 600 mmLaunched January 2023Connects with: Klipper (Moonraker)Similar build volume · Also prints ABS & ASA, Nylon (PA), Polycarbonate (PC)Compatible
Frequently asked questions
Is the BigRep ALTRA 280 compatible with SimplyPrint?
To our knowledge the BigRep ALTRA 280 is not yet supported. SimplyPrint works with 130+ brands and 600+ models via OctoPrint, Klipper and built-in integrations - check the compatibility list for a supported printer.
What slicer should I use for the BigRep ALTRA 280?
None of the slicers in SimplyPrint's cloud can slice for the BigRep ALTRA 280 that we know of: it doesn't take standard G-code. Use the slicer its maker recommends.
What filament can the BigRep ALTRA 280 print?
BigRep lists PLA, PETG, TPU & flexibles, ABS & ASA, Nylon (PA), Polycarbonate (PC), Carbon-fiber & glass-filled and High-temperature (PEI, PEEK, PEKK) for the ALTRA 280.
What is the BigRep ALTRA 280's bed size and build volume?
The BigRep ALTRA 280 has a 500 x 700 mm print bed and prints up to 800 mm tall, a build volume of about 500 x 700 x 800 mm. See the full specifications table above for bed type, temperatures and more.
When did the BigRep ALTRA 280 come out?
BigRep launched the ALTRA 280 on May 28, 2024.
© 2026 SimplyPrint. All rights reserved. This page and the compatibility, specification and review data on it are compiled by SimplyPrint and may not be copied, scraped, reproduced or republished, in whole or in part, without prior written permission. Printer images are the property of their respective manufacturers and are shown for identification purposes only; SimplyPrint claims no ownership of them. Quoted reviews belong to their authors.